How did a tie come about and how do you tie it?

It is said that there is no way to verify this.

Tie styles are: flat knot, Windsor knot, Pratt knot, cross knot.

1. Flat knot. The flat knot is one of the most popular bow tie styles for men, and it can also be said to be the most classic tie tie style. The style is simple and very convenient, and the bow tie has a diagonal triangle shape, which is suitable for narrow-necked shirts. The right hand holds the wide end and the left hand holds the narrow end.

The big end is in the front, the small end is in the back, and it is crossed on top of each other. Wrap the big end around after the small end. Continue to flip the big end on the front from the right-hand side to the left-hand side to form a loop.

Turn the big end under the tie knot and out of the neckline. The big end is then inserted into the ring that was formed earlier and fastened.

2. Windsor knot.

Windsor knotsWindsor knots are generally used for specific occasions such as business and politics. Very beautiful, in a typical British style, the steps are among the most complex of the most commonly used tie ties. It is suitable for shirts with wide collars, and the bow tie should be more horizontal.

Ties that are too thick should be avoided, and bow ties should not be worn too large.

3. Pratt knot.

Compared to other basic ties, Pratt knots feature the back of the tie facing outwards when starting to tie the knot, which has the advantage of reducing one winding step, and the bow tie is shaped like a Windsor knot, but it is smaller and more beautiful than the Windsor knot.

4. Cross knots.

The cross knot is a beautiful knot that is suitable for narrow plain ties, which are popular among young people. The bow tie is shaped like a slender and acutely angled triangle, giving it a sense of sophistication and sophistication. And in this style of play, the surface is in a cross-shaped shape, adding a sense of playfulness, which is a very good choice for men who are not willing to be bored and professionally dressed.

Hello dear, is answering this question for you, please be patient and wait.

Hello, there are four ways to do it.

Among the many ways to tie a tie, the four-hand section is the basic model, which is simple and easy to use, and is very friendly to boys who need to wear a tie when they just leave society.

When operating, the length difference between the big head and the small head is controlled at 30 cm, the wide end is placed on the outside of the narrow end, wraps it around the back of the narrow end, and faces the left side, and then wraps it around the right side from the front, and then passes the wide end through the neckline from the bottom to the top, and passes through the tie from the inside to the outside and from the top down, and then adjusts the shape of the bow tie after adjusting the length of the two ends appropriately.

The Nikki Knot is also an easy way to tie a bow tie, casual and rigorous, and because of its special tie method, it is easy to adjust the length of the narrow end, which is very suitable for men who are worried that the tie is not long enough.

When operating, it is necessary to turn the reverse side of the leader upwards, and the wide end from the back to the right side to the front, immediately from the bottom to the top and from the outside to the inside through the neckline, and then from the left side of the front to the right side, and then from the bottom to the top and from the inside to the outside, into the bow tie, adjust the length and size of the bow tie.

Kelvin knot. The Kelvin knot seems to be a little more simple and rough than the Nikki knot, but it is an extension of the single knot, which can make the bow tie look thicker and fuller, with clear angles, suitable for most places.

operation. The first two steps are similar to the Nicky knot, but it is clear that the third, fourth, and fifth steps are to wrap the wide end around the narrow end for one and a half turns, and then pass the wide end from the bottom up and from the inside to the outside through the circle you just wrapped, fully adjusting the elasticity of the bow tie.

Pratt knot. Pratt knots are a symmetrical way to tie a bow tie, which is also related to the way it is knotted. As with the previous two, the neckline and tie are partially facing outward, so it needs to be hidden from the shirt, and the three-dimensional and beautiful shape makes it suitable for most occasions.

When tying the knot, the first, second and third steps are similar to the Nicky knot, but the fourth step is to wrap from the right side forward, then to the left side, then from the bottom to the top of the neckline and from the inside to the outside, and finally from the top through the flat bow tie to adjust the size.

1. Start with the back of the tie facing outward. The wide end should be placed on the right and the narrow end on the left.

2. Ties are placed on top of each other, with the wide end lower than the narrow end.

3. Thread the wide end through the collar.

4. Pull the wide end down to complete the circle and tighten it.

5. Overlap the wide end from left to right and the narrow end.

6. Turn the wide end under the tie knot into the collar.

7. Thread the wide end through the tie knot in front from top to bottom.

8. Make the tie into a triangle, narrow the end, and tie the tie to the collar.

Cross knot: This is a suitable tie for thin ties made of monochrome and elegant materials. For men who like to show off their fashion style, you may want to use more crossover knots, which are characterized by a dividing line that makes them feel very stylish.

Tip: Pay attention to the steps to tie the tie with the back facing forward.

Romantic knot: The romantic knot is a perfect knot type, so it is suitable for the neckline of various romantic series, that is, shirts. The romantic knot can be freely enlarged or reduced by the adjustment of the folds, and the length of the remaining part can also be controlled according to actual needs.

The shape of the tie with a romantic knot is well-proportioned and the lines are straight and graceful, which is easy to give a good impression of neatness and rigor. Tip: Pleats are pressed on the wide side below the bow tie to reduce its knot.

The narrow edge can also be moved to the left and right so that a small part appears next to the wide-brimmed tie.

Tie precautions.

Pay special attention to the length of the tie after it is tied, generally the length is about 1cm on the upper edge of the belt buckle, too short or too long will look ugly.

The choice of tie width should be selected according to the body type and the version of the clothes, if it is a Korean version or a British style suit, it is more appropriate to choose a narrow tie (large head width 5cm), if it is a formal business, you can choose a wide tie (large head 8-10cm) is more suitable.

The above content refers to People's Daily Online-One Minute Get Foreign Style Tie Play.

1. Four-hand knot (single knot).

The knot can be completed in four steps, hence the name "four-hand knot".

It is the most convenient way to tie a tie, suitable for a narrow width of the tie, with a narrow collar shirt, the style is casual, suitable for ordinary occasions.

2. Double loop knot.

The double loop knot is suitable for thin ties, and the double loop knot can create a sense of style and is suitable for young office workers.

The special feature of this bow tie is that the first circle will be slightly exposed outside the second circle, so it should not be deliberately concealed.

3. Prince Albert's knot.

Suitable for soft thin ties and shirts with buckle collars and pointed collars, don't choose a thicker texture for the tie as it takes three turns.

4. Romantic knots.

The romantic knot breaks the rule that the tie must remain in a straight line, and the narrow end appears on the wide end, which is full of drama.

5. Windsor knot.

Named after the Duke of Windsor, the tie knot is the most orthodox form of collar, and the knot is full and powerful in a regular triangle, suitable for wearing with a wide-collared shirt for formal occasions.

Never use a tie that is too thick to tie a Windsor knot.

There are many ways to play ties, some are business, and some are casual.

1；Plain knot is the most commonly used way to tie and can be said to be the most classic way to tie it.

2；The half-Windsor knot makes men look personable and more confident. The half-Windsor knot is a more romantic way to tie the tie, the collar shape that approximates the regular triangle is more solemn than the oblique triangle type made by the four-hand knot, and the knot shape is slightly wider than the four-hand knot, which is suitable for any occasion, and among the many shirt collar shapes, it is the most perfect match with the standard collar.

There are many ways to tie ties, such as: ordinary knot (also known as single knot or flat knot), double single knot (also known as double ring knot), Windsor knot, half Windsor knot, cross knot, Prince Albert knot, four-hand knot, romantic knot, short knot, etc. Here is an example of how to play a tie, and the steps are as follows:

Step 1: Hang the tie around your neck, and hold both ends of the tie with both hands, 1 on top and 2 on the bottom.

Step 2: Wrap tie 1 around tie 2 from left to right to right.

Step 3: After wrapping tie 1 to the right side, wrap tie 2 around from top to bottom.

Step 4: Wrap tie 1 around tie 2 and the knot just wrapped around from right to left for half a circle, and tie 1 around the left side.

Step 5: After the tie 1 is wound to the left side, wrap the tie 2 and a half circle from top to bottom.

Step 6: Flatten tie 1 so that only tie 1 can be seen from your own perspective, and tie 2 is covered under tie 1.

Step 7, the left hand pulls the position of the knot of the tie 1 just formed in the circle, and passes the tail end of the tie 1 through the hole drawn by the left hand.

Step 8: After the tie 1 passes through the hole, straighten it down, and the knot of the tie is tied.

<> step 9, after the tie knot is tied, fix the tie 2 with the right hand, and use the left hand to tie the tie knot in the direction of the neck.

Move. <>

Step 10: After adjusting the position of the tie knot as needed, the tie will be tied.

Notes:

1. The length of tie 1 and tie 2 is not symmetrical, and the length of tie 1 should be longer than tie 2, otherwise the tie will be short in front and long in the back after it is beaten.

2. The length of the tie after beating is generally 1 cm above the belt buckle, and it is not beautiful if it is too long or too short.

3. The width of the tie is selected according to the body type of the person wearing the tie and the version of the clothes, and the width of the tie for formal business is generally wider than the width of the casual tie.

1. First turn the tie over and wrap the wide head around in a circle, as shown in the figure below

2. Wrap the narrow head around to form a "6" shape, as shown in the figure below

3. Twist to the reverse side with your right hand and pass through the "6", as shown in the figure below

4. The narrow head passes through the hand, and the two ends pull each other, as shown in the figure below

The most commonly used way to tie a tieWindsor knot steps:

1. Hang the tie around your neck with the wide end of the right end 4-6 inches lower than the waistband.

2. Cross the wide end horizontally in front of the slender end and make an X-shape under the chin.

3. Tuck the wider end upwards and then under the ring around the neck, pointing downward from the X to the trembling upwards. Use one finger to secure the x in place.

4. Pull the wide-angle end to the end.

5. Wrap the wide end around the knot and pass it horizontally from right to left.

6. Flip the wide end tip upwards and pull it diagonally through the front end of the knot.

7. Wrap the wider end around the top of the collar and place it back in place. It should appear on the left side of the thin end.

8. Thread the wide end horizontally from left to right through the anterior reed side of the knot. This forms a horizontal band. Insert one finger into it and secure it in place.

9. Place the end of the wide ring under the ring again, around the collar, so that the tip is facing up.

10. Rotate the wide end down and pass the tip of the pen through the horizontal loop saved with your finger in step 8.

11. Pull the wide-angle end all the way to the end and smooth out any creases or slack in the knot.

Half Windsor Knot Steps:

1. Hang the tie around your neck, with the big head at the right end hanging down to your thighs and the thin head at the left end on your ribs.

2. Straddle the wide end in front of the thin end from right to left, so that the lower chin is X-shaped.

3. Wrap the wide end of the tie horizontally around the thin end and behind it.

4. Start at the top and go through the opening of X, then pull it tight.

5. Hold the wide end with your right hand and wrap it in front of the thin end from right to left.

6. With your left hand, keep the triangle intact, place the wide side towards your chest, and then pass through the X from the back of the ring.

7. Use the index finger of your left hand to open the triangle that is now forming above the x and pull the wide end all the way down.

8. To adjust the length, pull the knot upwards towards the collar while tightening the thin end of the tie. You may need to adjust the level ring to make sure it's flat and even.

1. First turn the tie over and wrap the wide head around in a circle, as shown in the figure below

2. Wrap the narrow head around to form a "6" shape, as shown in the figure below

3. Twist to the reverse side with your right hand and pass through the "6", as shown in the figure below

4. The narrow head passes through the hand, and the two ends pull each other, as shown in the figure below

Steps. 1. Start with the tie facing backwards outward. The wide end should be placed on the right side and the narrow end on the left.

Steps. 2. Ties are placed on top of each other, with the wide end below the narrow end.

Steps. 3. Thread the wide end through the collar.

Steps. Fourth, pull the wide end down to complete the circle. Strain.

Steps. 5. Bring the wide end from the left to the right and stack it on top of the narrow end.

Steps. 6. Turn the wide end under the tie knot into the collar.

Steps. 7. Thread the wide end through the front tie knot from top to bottom.

Steps. 8. Shape the tie into a triangle, pull the narrow end, tie the bow tie to the collar position, and the tie will be ready.

The young lady teaches you how to tie a tie.

How do you tie a tie? Teach you how to tie a suit and tie yourself without prosthetics.

How to tie a tie

The tie is an essential role for men and a reflection of men's taste in dressing. Do you all wear a beautiful tie?

Four-hand knot (single knot).

It's the easiest of all ties to get started with and can be paired with a variety of shirts and ties.

The correct way to play is to keep the narrow side of the tie on the right side of the body, press the wide side on the narrow side of the bend, use the wide side around the narrow limb core edge in a circle, and then bury the wide side through the ring part of the neckline, and then the wide side through the ring hole around it to tighten and straighten, you can complete the knot.

Simplified knot (coachman knot).

This type of bow tie is best suited for shirts with standard and button-down necklines, and is the most common knot shape for thicker ties.

The correct way to play is to keep the narrow side of the tie on the left side of the body, press the narrow side to the wide side, flip the wide side from top to bottom at 180 degrees, circle around the narrow side, and then pass the wide side through the neckline in the loop, hide the fold behind it, and adjust the length of the tie when it is finished.

Windsor knots

It is said to be the system invented by the famous Duke of Windsor in the United Kingdom, so it is the most orthodox way to tie it. Because the width of this knot is wider than that of a regular knot, it is ideal for use on shirts with Italian necklines (figure-necks) and is often paired with silk ties.

The correct way to play is to keep the narrow side of the tie on the right side of the body, press the wide side to the narrow side, first wrap it out from the neckline on the narrow side, and then return to the wide side and wrap it around the neckline to yourself, and wrap it around the narrow side, so that the wide side is tied through the loop, and it is done.