Lenovo Notebook G475 How to restore the system Which master gave me a complete textbook

qweewq9707, what are you plagiarizing? People don't know how to install systems, what are you doing nonsense? No level!

The installation system is all the same.,Because you won't install it.,I recommend the ghost version.,One-click to get it.。 Insert the CD, 1. Press the power to turn on the computer, and when the Lenovo logo appears, click the "F12" key on the keyboard continuously.

2. The "Boot Menu" menu appears, use the keyboard, and select "CDROM".

3. After the XP disc is booted, the screen shows Boot from CD, and after two press Enters, it will boot from the CD, otherwise it will boot from the hard disk.

4. At this time, the Lenovo System Recovery Disc End User License Agreement will appear, type "y".

Then it's simple. You can refer to the following.

The seniors already have the answer. If you don't have a boot disk, you can install the system on a USB disk, and you won't find me.

Seeing that netizens want this tutorial, let's write it briefly.

Lenovo one-click recovery engineer version tutorial.

Step 1: Engraving.

After the next ISO image engraved into a disc, you want to use *** engraved disk, CD capacity is not enough, this must be noted, engraved disk here is not talked about, will not learn it yourself.

Step 2: Disc boot.

Put the disc into it when you boot it,Usually Lenovo machines press F12 to select the boot start item,Of course, choose the optical drive to start。

Step 3: Choose the recovery mode.

After the disc booted, many people said that a selection box would appear here to install the mode, but I didn't touch it during the test, and I went directly to the new installation mode.

Since many people say that there is this selection box, although I didn't come across it in the test, let's explain it as well. You can enter "1" in the selection box: clean install. "2", repair mode. "3". Repair the ASD module.

Continue on,I went directly to the fresh installation in the test,A dialog box will pop up below,Ask to enter the size of the C disk,In MB,I usually enter 50000,This can be done as needed。 After entering the enter, the program will automatically help complete the partition, which will divide a hidden partition, which is where the one-click recovery and factory backup files are stored.

After the program is executed automatically, any key will be prompted to shut down at the end.

Step 4: Set up Chinese.

After any of the above keys are turned off, press the power button again, and the dialog box will pop up after starting, select the language option, and hit 21 Enter is Chinese. The program runs automatically again, and after deploying some files, it prompts for any key to restart.

Lenovo's one-click recovery has actually been completed here.,Now you can install the system on the machine.,Don't talk about this.,Self-learning won't be.。

I'm not going to take pictures today, it's midnight now, I'm very sleepy, and I don't have a machine to take pictures in my hand. Anyway, it's detailed enough, and it's definitely okay to do what I wrote.

If you still have any questions or questions, follow the post and will reply after seeing it.

Start by opening the Control Panel in the Start menu, and after opening the Control Panel, turn on the Backup and Restore option among the many options in the Control Panel.

Then select Recover System Settings and Computer in the next interface. If your computer doesn't have restore turned on, you might need to turn it on.

Then open System Restore, that is, click on the button shown in the picture, if there is an account control, there will be a prompt, just pass.

The wizard that restores the files and settings will then begin, just follow the wizard's prompts. Directly click Next.

Then, in the System Restore Point options, select a restore point and make sure that the restore point you selected is the one you selected from when your system was normal.

After you are sure, a confirmation page will appear, which shows detailed information about the restoration, after making sure that there are no errors, click the Finish button to start the system restoration, the system restoration will restart, and then enter the relevant restore operation during the boot process.

One-click restore system requires a backup of the system in advance before it can be used, I recommend that you reinstall it directly, and it will be very fast.

Dear users, the use of Lenovo one-click recovery is: first, in the case of shutdown, press the small key next to the power on/off key (like a turning arrow), then you will enter the Lenovo one-key recovery system, wait patiently for a while, enter the operation interface of one-key recovery, you will see two options to restore factory backup and restore user backup, generally choose to restore user backup, and then follow the prompts step by step, you can restore to the normal system. It should be noted that during the restoration process, the laptop battery should be fully charged or connected to a charger.

You can check how to use one-click recovery through the link below.

Does the computer still have a factory reset this? It seems that it would be nice to reinstall the system

There is a one-click recovery on the computer.

One. Install the system with a disc.

2.Set the computer to boot on the optical drive (when starting the computer, press the del key or press F2 continuously to enter the CMOS settings and save the sum Danxian), 3Put the burned system clone disc into the CD-ROM drive, start the computer, enter the CD boot menu, generally select the first item, install the WinXP operating system to the C disk, and make sure, then the computer will automatically install the WinXP operating system to the C disk of the computer, and it will be installed in about 10 minutes (including all the drivers and common software of the computer).

The entire operation process is fully automated, not managed.

4.Put the notebook driver disc into the optical drive and install the notebook-specific driver.

Two. There is no optical call to beat the drive, use the hard disk installer to install the system.

2.Install the hard disk installer, and run the software, in the program operation interface, according to the prompts to load the disc image file, and according to the prompts to complete the next operation, the program will automatically help you to install the WinXP operating system, including drivers, application software, etc. to the C disk, saving trouble, time and effort;

I'm doing maintenance, if you have any questions, please feel free to contact me.