How to improve the success rate of cloisonn lamination 5

**Cloisonné craft painting making raw materials, tools and drawings!

Silk (silver, white, black, gold) of 55 yuan kg.

of 65 yuan kg.

Glaze (there are more than 100 colors, about 40 colors are commonly used: depending on the color**.

Colored sand (with 24 colors) yuan kg.

Sand glue: 4 yuan kg.

Drawings (with color illustrations): depending on the size.

Membrane: 5 yuan m.

Resin: 12 yuan kg.

Curing agent and accelerator 15 yuan kg.

Laminating film is also called lamination, filming, glue laying, etc., is a unique technology in cloisonné craft painting, the main process is to use a liquid resin glue on the picture of good color to soak into the picture, the glaze sand, gold wire, painting board 3 kinds of raw materials are wrapped, and after the resin glue solidifies, a transparent hard protective layer like amber is formed in the picture. Because the picture is transparent, it will not cover the gold filigree and colored sand in the lower layer, so the cloisonné craft painting after the lamination is beautiful and durable. "Cloisonné House" has a very detailed introduction, limited to answering too many words, here to write out the general steps.

1. Prepare the following raw materials according to the percentage: take 100 ml of resin with a measuring cup and pour it into a container; Take a milliliter of purple accelerator and drop it into the resin, then stir it fully with chopsticks, wooden sticks, etc., stir evenly and place it for a while, and then drop in the curing agent after the bubbles are almost volatilized;

Take a milliliter of white curing agent and drop it into the mixture of resin and accelerator that has been stirred before, and start stirring. (The above percentages are not absolute values, and should be appropriately increased or decreased according to the temperature at that time, less in summer and more in winter).

2. First, use masking paper (self-adhesive tape similar to kraft paper) to dip the drawing board around it, revealing a height of about 1-2 mm; Then pour the mixed resin liquid into two-thirds in the middle of the picture, and use the old playing cards to spread the mixture around the drawing board, and let the liquid spread the whole picture.

3. Pour the remaining one-third of the liquid into the middle of the painting, and then spread the glossy film (polyester film) on it.

4. When there are no bubbles in the whole picture, the resin will be completely cured, and the diaphragm can be uncovered.

5. Use an angle grinder to polish flat and smooth, and then frame, so that a cloisonné process painting is completed.

No, in Japan, there is a difference between Shippo yaki, cloisonné and Shippo yaki.

There is harm, but it will not be said to be very powerful, usually be careful, bring a special mask, so that it can be greatly avoided!

In fact, it is 3 workers who take the front brigade order, one: line drawing; 2: Cloisonné; Three: dot blue (colored).

However, the line can be abrupt, and the painting is basically finished as soon as the color is finished, and only the frame remains.

If you want to press the film, it is done after the color, the general person knows that the stool is based on the judgment of the pressure is not good, the pressure film is best to ask a professional master to press, the pressure is completed, of course, it is still to be framed.

You can buy materials for self-study. There are some available online.

Trust me, really, really, very simply. It's just very time-consuming.

This line is indeed a lot. I've been cheated out of a little bit of t

Distinguish between the best methods. If you want to start a business, you want to join. 1. Ask him if he can teach lamination, this one is the most important and the most difficult.

Don't teach, **! 2. If he provides you with colored sand, not glaze, you can leave with a disdainful look. **！

And then there is your attentiveness and patience, good luck

It is recommended that you take a look at the Weiqi Craft Factory, which is very good.