What should I do if I can t wake up often, and what should I do if my computer won t wake up?

Hibernation is to save the current record, the current running state of the data in the hard disk, the whole machine will completely stop the power supply, because the data is stored in the slower hard disk, the time to enter the sleep state and fully wake up is relatively slow. But faster than booting. It doesn't require any power supply during hibernation, so you can completely disconnect your computer from power.

If your computer has hibernation enabled, press the shift key and click the "hibernate" button when shutting down to enter the hibernate state.

When you wake up, it's the same as if you boot it normally, but it's so fast.

1. Confirm whether the phone supports JOVI voice assistant.

Go to Settings --jovi --jovi ability settings - voice assistant to see if voice wake-up is supported.

2. Confirm the settings of your phone.

Models that support wake-up with the screen off: Go to Settings -- jovi -- jovi ability settings -- voice assistant -- voice wake-up, enable voice wake-up and enter the wake-up word.

Models that do not support wake-up with the screen off, only support wake-up with the screen on (available on the voice assistant settings page.)"Wake up with the screen on"Switch, do not support entering wake-up words): Go to Settings --jovi--jovi ability settings --voice assistant --voice wake-up -- wake-up screen to turn on the function.

3. Check if there are other apps in the background that are occupying the microphone.

If there is other software in the background that occupies the microphone, it will not be able to wake up the Jovi voice assistant.

4. Check whether the microphone of the mobile phone is blocked or blocked.

Please pay attention to whether the phone case is blocking the microphone, if the microphone is blocked, you can try to clean it or take the phone to the customer service center to clean it.

5. Confirm whether the wake-up distance is far away and whether the environment is noisy.

If the distance is far away or the environment is noisy, it may not be possible to wake up the voice assistant, it is recommended to be closer to the mobile phone (such as holding the mobile phone with your hand) for testing, and try to maintain the natural speed and intonation of speech in daily life to try to wake up the voice, and try to speak in full volume and clear expression.

6. Confirm whether the corresponding language is not recognized.

Currently, the voice assistant supports Mandarin Chinese, and does not support Chinese dialects and other national languages.

7. Replace a stable network.

Confirm that the network condition (wifi, data network) is good, and it is recommended to change to a stable network and try again.

8. Clear program data.

Go to Settings --Apps & Permissions --App Management --Jovi Voice --Storage--Clear Data, and then re-enter the wake word attempt.

9. Reset all settings.

Go to Settings - System Administration - Backup & Reset - Restore all settings and follow the on-screen prompts.

Restoring all settings will not delete any data or ** files, only all settings of the phone will be restored, and some third-party app accounts need to be re-logged in, please confirm that it does not affect the use of the software before operating.

The whole process is meticulous and complex, and every link must be paid attention to to avoid mistakes.

Method 1:

1. Open the "Control Panel" of the computer, click "System and Security" - "Change the function of the computer button" under the power options, this page appears, and click "Change Advanced Power Settings".

2. In the power options, move the mouse down and pull the bar, and look for the word "sleep".

3. Double-click "Sleep" with the mouse to see if the setting is "enabled", if not, set it to enable and click "Apply" - "OK".

Method 2:

2. In the Device Manager page, find "Mouse and Other Pointer Devices", and right-click to open "Properties".

3. Click "Power Management" on the property page, put the checkmark in front of "Allow this device to wake up the computer", and then make sure that the computer will not have the problem of not being able to wake up.

4. If you want to turn off the hibernation function, change the two display settings to "Never" in "Change the settings of the plan", and save the modifications.

At this point, the issue has been resolved.

1.It may be that the computer can't wake up after hibernation (the main reason).

2.Maybe it's due to the system setup.

3.It may be that the system firmware does not support this feature.

Method 1Check to see if your PC supports this feature!

How to view: Click "Start - Run"; Then type "cmd", then click OK, then type "powercfg -a" in the command window, remember - there is a space in front of it; Press "Enter" when you're done; The results show standby (s3); Description Your machine supports the sleep function. If not, you need to contact the computer manufacturer to upgrade the blos.

2.System Setup Workaround:

In many cases, it is because this feature is not turned on. Right-click on My Computer, select Manage, and then open Device Manager - Mouse & Other Referring Devices. Then right-click and select Properties.

Then switch to "Power Management" and tick the box.

2. How to set up computer hibernation.

Method steps.

1.Open the Start menu and click Control Panel.

2.Select Hardware & Sound.

3.Select a power option.

4.Change the computer sleep time and monitor shutdown time, and save the modification notes.

There is a difference between sleep and sleep in the computer, where the win7 system mainly uses the sleep mode, and the XP system mainly uses the sleep mode. There are differences, but the ultimate goal is to protect your computer from being automatically locked when left unattended.

Focus on a few water signs.

It came out in a few seconds.

Enter "cmd" in Runtime. In the cmd command, run "powercfg-a" and click "enter". Check whether the computer device supports sleep wake-up.

Go to "Device Manager" and find devices such as "Mouse" and "Keyboard". In the mouse properties interface, find "Power Management Options". In this option, select "Harmonize to allow this device to wake up the computer"., detailed steps:

1. Enter "cmd" in the runtime.

2. Under the cmd command, run "powercfg-a", and then click "Enter".

3. Check whether the computer device supports sleep wake-up.

4. Enter "Device Manager" to find "Mouse", "Keyboard" and other devices.

5. In the mouse properties interface, find "Power Management Options".

6. Check "Allow this device to wake up the computer" in the dust destruction of this option.

The reasons for not waking up from sleep generally include physiological factors, such as lack of sleep, overwork, etc.; It also includes pathological factors, such as hypoglycemia, hypertension, diabetes or depression, etc., which need to be diagnosed in a timely manner, and the solution should be carried out according to the doctor's instructions**. Physiological factors: due to lack of sleep, excessive mental or physical work, etc., the brain nerves are overtired, and the symptoms of not waking up from sleep are manifested.

It is usually temporary, and usually eases gradually with appropriate rest. Pathological factors: Hypoglycemia:

Due to the weak physical fitness and low blood sugar in the past, especially diabetic patients who do not eat on time, it is easy to induce hypoglycemic reactions and show the above symptoms. It is necessary to make a clear diagnosis in a timely manner, supplement sugar according to the doctor's instructions, and supplement nutrition to promote early recovery. High blood pressure:

Due to the previous hypertension disease, when the mood is unstable or the rest is not good, it is easy to lead to increased blood pressure, increased intracranial pressure, and dysfunction of the brain nerve center, showing the above symptoms. It is recommended to monitor blood pressure in time and give blood pressure lowering** according to the doctor's instructions to relieve uncomfortable symptoms. Depression:

The above symptoms occur due to long-term psychological burden, excessive mental stress, or long-term lack of care, etc., leading to episodes of depression and sleep disorders. It is recommended that the spinal implant should be seen in time, and the doctor's instructions for psychological adjustment or medication** should be followed. It is recommended that during the period, you should strictly follow the doctor's guidance, develop good living habits, avoid excessive fatigue, and maintain a light diet, which will help shorten the course of the disease.

If you have any uncomfortable symptoms, seek medical attention in time to avoid delaying the condition.