Which equipment is better to use to make biomass pellets?

China is a big energy consuming country, and it is an inevitable choice to adjust the energy structure and use biomass energy. After compression molding, the volume of biomass is greatly reduced, which is more convenient for transportation, storage and use, which solves the key problem of large-scale utilization of biomass.

This technology and equipment are very suitable for biomass power generation, clean energy transformation of industrial boilers, and new cooking fuels in rural areas.

It mainly has the following far-reaching significance:

1) Replace coal, thereby reducing the consumption of primary energy.

2) Achieve a carbon cycle and reduce the emission of the greenhouse gas carbon dioxide.

3) Increase the added value of agriculture and increase farmers' income.

4) The technology and equipment are in line with the national industrial policy and have good economic and social benefits.

Anhui annular biomass pellet fuel is a new type of fuel supported and promoted by the state, which is an environmentally friendly fuel that is based on agricultural and forestry waste, crushed, dried and pressurized, and increased by the molding of large environmental protection fuels. The customer reputation is very good!

LS-HM-5002 agricultural and forestry biomass molding equipment.

LS-HM-500 agricultural and forestry biomass molding equipment.

LS-HM-420 Agricultural and Forestry Biomass Molding Equipment.

The product adopts high-strength, high-precision gear rotation, stable and reliable operation;

Vertical feeding, uniform distribution, large output, low energy consumption;

The mold is stationary, the pressure roller rotates, the material is centrifuged, and the distribution is uniform;

The mold is double-layered, and the upper and lower sides are used alternately to reduce costs;

Annular mold, vertical structure, conducive to heat dissipation and cooling of the particle chamber;

Independent frequency conversion feeding device to ensure the stability of feeding;

The active cooling heat dissipation greatly reduces the temperature of the gear oil inside the transmission device to ensure the normal operation of the machine;

The structure of the equipment is safe, compact, low noise, low failure, and small footprint;

The pressure roller adopts non-stop oil injection and oil shortage alarm, which greatly improves the service life and work efficiency of the pressure roller;

Closed feeding, dust negative pressure**, clean working environment, no slag in granular products;

The so-called biomass pellets.

What are the raw materials? It is a biomass raw material with a certain particle size. It can be pressed into various shapes of raw materials such as rods, granules, and blocks under a certain pressure.

After this action to form the raw materials, their density can reach up to 1400 kilograms of cubic meters, the energy is naturally extraordinary, can be comparable to the medium coal, the combustion characteristics are greatly improved, with the characteristics of long-lasting firepower, less smoke and so on.

Environmental and economic characteristics of NOGN of biomass pellet fuel.

The raw materials used in biomass pellets are generally divided into two major categories, one is forestry waste, after the trees are harvested and processed, there will be a large part of the materials can not be used, these leftovers and residues mainly include piles, branches, roots, leaves, etc. of various trees, as well as shavings, sawdust, broken wood, etc. One is the harvesting of wheat, corn and rice in agricultural production.

After peanuts and other crops, the remaining inedible stems, leaves, and other wastes are collectively referred to as straw, and the cells of the above two types of biomass raw materials contain cellulose, hemifiber cord and lignin.

Accounts for more than 2 3 plant components.

The existing biomass molding technology can be divided into three main categories according to the shape of the molding: cylindrical rod molding, block molding and granular molding technology. If the coal with a certain particle size and drying to a certain degree is mixed with biomass in a certain proportion, a small amount of sulfur fixing agent is added, and it is pressed into a biomass briquette, which is one of the most marketable technologies for biomass solidification.

Biomass pellet raw materials peanut shells, straw, sawdust, rice husks, corn stalks, tree bark, etc.

Agricultural resources of the first acre of material particles.

It mainly includes waste from agricultural production and processing, as well as various energy plants.

In the process of agricultural production, after harvesting crops such as wheat, corn, and rice, the amount of inedible straw left is very huge.

In the process of agricultural product processing, wastes such as rice husks, corn cobs, peanut shells, bagasse and cottonseed husks are generated, which are relatively concentrated and easy to collect and dispose of, and can be used as biomass fuels and traditional agricultural energy.

Domestic sewage and industrial combustion organic wastewater of biomass pellets**.

Industrial organic wastewater is mainly the wastewater discharged in the production process of alcohol, sugar, food, pharmaceutical, paper and other industries, and the wastewater is rich in organic matter, which can be produced by anaerobic fermentation to produce biogas and treat sewage at the same time.

Biomass pellets** of municipal organic solid waste.

It is mainly residential domestic garbage, commercial service garbage, etc.

Biomass pellets** home poultry manure.

The raw materials for biomass pellet fuel processing are mainly crop straw, by-products of agricultural product processing industry and forestry waste.

Crop straw is the waste residue of inedible rhizomes and leaves in the process of agricultural production. This kind of straw waste is the traditional domestic energy in the vast rural areas of China, and most of it is used as fuel for farmers' cooking and heating. The raw materials used in biomass pellet fuel are mainly corn straw, straw, wood chips, branches, soybean straw, cotton straw and tobacco straw and other crop straw biomass.

Due to the difficulty of collecting and storing this kind of waste biomass, most users use on-site incineration and stacking in the field for disposal. This treatment method not only causes irreversible pollution to the environment, but also greatly reduces the value of energy use.

Biomass pellet raw materials peanut shells, straw, sawdust, rice husks, dismantled corn stalks, tree bark, etc.

Biomass pellets are processed by cold dense molding of crushed biomass straw, forestry waste and other raw materials under normal temperature conditions by pressing rollers and ring dies. The density of raw materials is generally covered with jujubes, and the density of particles after molding is convenient for storage, branch transportation, and greatly improves the combustion performance of biomass.

However, the energy density of most crop straws does not meet the requirements. At present, the biomass pellet market currently uses Pinus sylvestris sylvestris granule fuel, oak pellet fuel, and mahogany pellet fuel as the best fuels, mainly in the pure raw materials, low ash content, naturally high calorific value, and ash content is basically about 0-1%.

Biomass pellet raw materials are generally wood waste, straw, branches and other raw materials with lignin.

1. It can be used as renewable energy: it can directly burn biomass pellets to generate electricity, replacing conventional fossil energy such as coal or gasoline; 2. It can be used for the preparation of fermentation products: it can be used for biomass fermentation to prepare diesel, ethanol and other fuels; 3. It can be used as organic fertilizer

It can be applied as organic fertilizer, such as straw, wood chips, etc., which can improve soil texture and increase soil fertility; 4. It can be used for plant care: it can be used for plant care, such as plant root development, nutrient chain and return migration, etc., which is conducive to the growth and development of plants; 5. Can be used as feed additives: can be used as additives for animal feed, such as calcium phosphate, calcium carbonate, etc., which can improve the nutritional value of animal feed; 6. It can be used for environmental repair

It can be used for the remediation of polluted soil, such as reducing the content of pollutants such as heavy metals and organic pollutants in the soil, which is helpful for the control and reduction of pollutants; 7. Can be used for filling materials: dust can be used as filling materials, such as waterproof coatings, glass wool, plastic products, etc., which can improve the performance and durability of the product.

At present, the biomass pellet market takes Pinus sylvestris sylvestris granule fuel, oak pellet fuel, and mahogany pellet fuel as the best fuels, mainly in the pure raw materials, low ash content, naturally high calorific value, and the ash content is basically about 0-1%.

Here's a look at some of these good pellet fuels:

If you have any questions about biomass pellet fuel, please feel free to continue with them.

Summary. Dear, I'm honored to have your question The information that the teacher found for you here is: Biomass pellets **Need? ：

Biomass pellets are needed in the northern part of the country for low winter temperatures, and heating areas need it. The use of biomass pellets is greatest in areas with low winter temperatures in the north and heating needs. Biomass is made of combustible straw and chaff and other high-pressure block firing, this material is more environmentally friendly than coal, and general power plants rarely use biomass pellet fuel as fuel, mainly because biomass pellet fuel is too expensive.

Biomass power plants, these power plants are mainly biomass fuels, and some will be purchased or sent to the plant in cooperation with local people.

Biomass pellets **Need?

Yes. Dear, I'm honored to have your question The information that the teacher found for you here is: Biomass pellets **Need? ：

Biomass cracked pants are grains, and the northern winter temperature is low, and heating areas are needed. The use of biomass pellets is greatest in areas with low winter temperatures in the north and heating needs. Biomass is made of combustible straw and chaff and other high-pressure block firing, this material is more environmentally friendly than coal, and general power plants rarely use biomass pellet fuel as fuel, mainly biomass pellet fuel is too expensive.

Biomass power plants, these power plants are mainly biomass fuels, and some will be purchased, or they will cooperate with local people and send them to the factory area.

Suggestion: Dear [Xian Hall File Flower] Now that the epidemic is repeated, you must pay attention to the <> of the slag when you go out and pretend to be chaotic

Wear a mask when you go out, wash your hands frequently! I wish you a happy life What kind of power plant is <> power plant?

Datang Huaibei Power Plant.

As of 2020, the raw material is dry sawdust, and the equipment required: biomass pellet machine, belt conveyor, sieve,Equipment cost: less than 150,000,000The raw material is dry branches, the required equipment:

Crusher, crusher, biomass pellet machine, belt conveyor, cooler and other auxiliary equipment, equipment cost:Up to 250,000.

The raw material is the moisture of the straw required equipment: crusher, crusher, dryer, biomass pellet machine, belt conveyor, cooler and other auxiliary equipment, equipment cost:Around 400,000.

It's hard to say how much a set of biomass pellet machine will invest, which depends on the moisture and output of the raw materials to determine the type of pellet machine equipment and other auxiliary equipment to match. All equipment is for the service of raw materials, and inspecting the raw materials is the key step to make pellets.

The biomass pellet machine production line is determined by the raw materials used. For example, if the raw material is a branch and trunk with large moisture, it should be used to chip, crush, dry, granulate, package, and leave the factory.

It mainly depends on what raw materials are used. 350 type pellet machine equipment 10,000, model: 350 type per hour output 300 500 kg 450 type 500 800 kg 560 type 1 ton 600 type 2 tons 850 type 3 4 tons Panwei wood pellet machine has more than 60 customers around Chengdu and more than 200 machines in production!

A set of biomass pellet machine ranges from more than 80,000 to 200,000.

How much is a wood pellet machine? It is a question that many customers want to know, the first class of wood pellet machine depends on the output of wood pellet machine, and the output of wood pellet machine determines the model of wood pellet machine. But making wood pellets is not as simple as everyone thinks, not that a wood pellet machine can produce wood pellets.

First of all, the moisture requirements of the raw materials of sawdust pellets are very harsh, and the moisture content of the materials is too high, which blocks the mold pores and makes the particles unable to be produced; The moisture content of the material is too low, if it is too dry, it is not easy to form, and the viscosity is not enough. The moisture of raw materials before quenching and tempering is generally 12 13, and 15-20% of the raw material moisture after modulation is the standard for pressing sawdust particles. Pay attention to control the moisture content of the raw material before entering the machine, if the moisture content is high, there will be slippage in the ring die, resulting in the phenomenon that it is not easy to discharge.

If your raw material moisture meets the requirements, a wood pellet machine can produce wood pellets. If it does not meet the requirements, it needs to be dried, so it needs to be equipped with a dryer and a hot blast stove. Of course this is the case where your raw material is sawdust.

If your raw material is wood chips (the thickness is less than that, it needs to be crushed, which is equivalent to adding another process. There are also customers whose raw materials are bark, which can also be added to the pulverizer.

However, some customers are raw materials for wood scraps, because wood scraps are cheap and easy to buy, so there are many cases, so you need to add a wood chipper, first cut the wood scraps of non-specification into wood chips, and then crush them.

There are also customers whose raw materials are waste building templates, so they need to change the wood chipper to a bamboo plywood crusher, because the bamboo plywood itself has a lot of iron nails, so it is very easy to hurt the knife on the wood chip machine with a wood chip machine, and another reason, the waste building template is relatively wide, and the feed port of the wood chip machine is generally at 1250px, which does not need to be manually broken in advance, right? The bamboo plywood crusher's feed port is smaller than the bamboo plywood can enter, and the bamboo plywood crusher gnawing knife is an ingots knife, and the iron nail has little impact on him. Unlike the chipping machine knives, which are easy to break.

Bamboo plywood to make wood pellets is also an advantage, generally its moisture is very small, between 15-20%, so using bamboo plywood to make pellets saves the trouble of the dryer.

The last factor, if the output of the sawdust pellet machine exceeds 1 ton per hour, a cooler is needed, because the temperature of the sawdust pellets just produced is about 50-60 degrees, and after the production, the pellets are steaming, and the purpose of cooling is to cool the pellets, and use the wind to extract this part of the heat and steam to meet the standard of direct bag sales of pellets. If it is not cooled, unless there is no rush to bag sales, the water vapor and heat after bagging will regurgitate moisture after the bag is sealed, affecting the molding of the particles. Finally, there is the packaging machine, which is selected according to the customer.

Therefore, how much is a wood pellet machine, it is not to say that you can solve it by giving you a number, you need to calculate according to the material, moisture, and equipped with the corresponding equipment to get the result. This article is written by Jinan Guanbei Machinery Engineer Sun, **Please indicate the source, counterfeiting must be investigated.