Which board is good for wardrobe doors? What is the reason?

At present, many family lockers have considered the whole house customized decoration mode. The customization of the whole house has a high appearance value and uniform colors, which makes the owner less worried. Many well-known brands of wardrobe boards now use particle boards.

Due to the wide variety of boards on the market, there are particle boards, multi-layer boards, eco-boards, MDF, etc., so 90% of owners will be confused when choosing boards as wardrobes. They are worried that the service life will not be too long after the selection, and it will not be durable.

Compared with wood-based panels, log panels use the lowest amount of glue and have high environmental performance. However, since China's timber is mainly dependent on imports, the ** of wood planks will be very high. Logs have high requirements for drying and wetting in the room.

If not properly maintained, cracks will appear. In addition, there are almost no wardrobe doors made of logs, so it is very expensive and suitable for people who don't need money. Ecological board, also known as large core board, is a board made of solid wood strips.

Thanks to a layer of melamine decorative panels on the surface, the painting step is avoided and the emission of toxic substances is reduced, making it more environmentally friendly.

The structure of the eco-board is not stable enough, and only one direction is solid, so it is also difficult to maintain. MDF is a board made by pressing wood fibers and plant fibers at high temperatures. This circuit board is easy to process, has good styling capabilities, and most importantly has a low cost, so the doors made from it are not particularly expensive.

However, this kind of board has poor waterproofness and nail holding power, and it is easy to rise when exposed to water. Particleboard is much higher than other boards in terms of physical properties, especially in terms of resistance to cracking and deformation.

Many users believe that particleboard is not environmentally friendly. In fact, the environmental friendliness of the panels mainly depends on the glue used and the construction process. Now with the continuous progress of science and technology, the edge banding technology of particleboard has also been put in place.

Therefore, when choosing particleboard, there is no need to worry about excessive formaldehyde content. Particle board can only be produced in large factories, because the equipment in the production process is relatively complete, and the industrial production technology is also in place. Particle boards and other boards also have advantages in terms of **.

Many well-known brands choose particle board for their wardrobes.

When choosing a wardrobe door, try to choose synthetic wood, because such wood will be stronger, and has a moisture-proof effect, and can also avoid the problem of deformation after too long use.

Try to choose synthetic wood, because this wood will be heavier, and it will also have a moisture-proof effect, and it can also prevent insects from growing in some places.

You can choose solid wood boards, which are more sturdy, very suitable for wardrobes, and can be installed well.

Wardrobe is now indispensable at home, and we should pay attention to the environmental protection and quality of the board when choosing wardrobe panels. I purchased the No. 1 log board of Dawang Coconut and their house, the choice is imported wood, the quality is not said, it can be a cabinet to the top, and the environmental protection has reached E0 level, such a brand I think is still very assured. If you want to know more, you can take a look.

Multilayer board, also known as plywood, is a common furniture material that generally uses a single odd-numbered layer to bond adjacent veneers to each other in the longitudinal direction. The common ones are plywood, plywood, etc.

The most obvious advantage of multilayer board is that it has a particularly strong compressive ability, is not easy to deform and crack, and has a relatively small possibility of dry shrinkage and expansion. Able to properly regulate the temperature and humidity in the room, the surface of the multi-layer panels shows the natural wood grain of the wood and is easy to pave.

Blockboard. Blockboard refers to a special kind of plywood made of wood slats spliced or hollow core board as the core board on the basis of plywood production, covered with two or more layers of plywood on both sides, and glued and pressed.

The blockboard has good screw holding force, high strength, strong quality, sound absorption, heat insulation, etc., and the moisture content is not high, the processing is simple, and the most widely used.

Solid wood boards. Solid wood planks are planks made from intact wood. These sturdy and natural textures make them the perfect choice for renovations. However, due to the high cost of such plates and the high requirements of construction technology, they are not used much in decoration.

Solid wood boards are generally classified according to the substantive name of the board, and there is no unified standard specification.

Particle boards. The surface of the particle board is smooth and delicate, without knots, insect eyes, no warping, no cracking, and has the advantages of high physical and mechanical strength, equal longitudinal and transverse strength, sound insulation, mildew prevention, economy, and heat preservation. It is more decorative than other woods.

The particle board has small warpage and deformation, good dimensional stability, high strength, good stiffness, and is not easy to bend when hanging heavy clothes. The wood-based panels used in the European furniture market are mainly solid wood particle boards.

Generally, the cabinet body is made of various plates, but there are many choices of materials for wardrobe doors, and the properties of wardrobe doors of different materials will be different; Due to the large size of the wardrobe door, it is generally recommended to use a stable and not easy to deform plate for the cabinet door.

In terms of comprehensive cost performance and actual performance, particle board has good stability and is not easy to bend, so it is a more suitable choice for wardrobe doors.

1. What kind of board is better for wardrobe doors?

2. Conclusion.

Particle board for wardrobe doors, or MDF, and man-made boards are very good, because they are relatively strong and have low cost.

It is better to use solid wood, because it has a better moisture-proof and insect-proof effect. Hollow wood is easy to water, easy to grow mildew, solid wood has a better air isolation effect than composite wood, hollow wood.

A1MDF is mostly used, and most of the good brands are environmentally friendly polyammonia boards, which have good fireproof and moisture-proof performance. The manufacturing process of stainless steel cabinet doors is more complex, the cost is higher and the processing is more difficult, and it has been used less and less in the market.

2.At present, the cabinet doors are mainly made of solid wood, fireproof board, blister and paint.

Ask if it's okay to ask Ozon board.

Ousong board is used to make cabinet doors, and Ousong board is the most environmentally friendly board for cabinet doors on the market, which can completely achieve zero formaldehyde. It is a solid wood chipping through high temperature lamination plus MDI glue for heart bypass surgery, which is commonly used to make cabins abroad, with high stability and nail grip. Ousong board wardrobe does not contain formaldehyde, formaldehyde is not a necessary direct material in decoration, coatings and adhesives are.

Now the most commonly used adhesive is urea-formaldehyde resin, there will be a large number of formaldehyde residues in the production process of urea-formaldehyde resin, known as free formaldehyde, this part of the free formaldehyde will be released when the paint is leveled and cured, which is the direct harm of formaldehyde in decoration. The interior of the Ousong board wardrobe is a directional structure, no joints, no gaps, cracks, good overall uniformity, and extremely high internal strength, so both the first and the edge have a super nail holding ability that ordinary plates cannot match. The quality of the Ousong board wardrobe is very good, it looks very atmospheric, the color is very like, the luster is very good, it looks at the high-end atmosphere on the grade, the workmanship is fine, the dimensional accuracy is high, and the skilled technology of the workers makes the floor particularly beautiful, and the floor feels very good, and it feels so delicate.

Ask what brand of kitchen cabinet hardware accessories is good.

Answer 1, Hettich Hettich brand cabinet hardware in the market by everyone's welcome, we choose to buy Hettich hardware accessories, we must pay attention to the selection of appropriate materials, style and technology, to avoid affecting the overall cabinet installation effect. 2. Yajie Yajie brand hardware accessories, mainly a research and development, production and sales-based, in the market reputation and experience is very recognized by consumers, Yajie brand hardware accessories design novel, excellent quality, has been praised by consumers, is a good hardware products. 3. The cabinet hardware produced by Blum Blum is green and environmentally friendly, and has obtained excellent use evaluation with good quality, good market reputation and perfect after-sales service system.

I think it's better to use wood, because it doesn't decay easily, and it's easy to clean and clean.

To make wardrobe doors with particle board, or MDF, the natural board is quite strong because of the fighting strength and low cost.

Common wardrobe boards include moisture-proof boards, fir boards, MDF, multi-layer solid wood boards, particle boards, etc. It's better to use a moisture-proof sheet.

1. The wood board is most afraid of moisture, and it is better to use the moisture-proof board, the advantages of the moisture-proof board: the moisture-proof board is to add a certain proportion of moisture-proof particles to the particleboard substrate, which can greatly reduce the degree of expansion of the board when exposed to water.

In addition to the advantages of particleboard, there is also a prominent advantage that is moisture-proof. However, it should be noted that the expansion rate of moisture-proof board and ordinary particleboard is the same when soaked in water, and the so-called moisture-proof board only has an effect on the moisture in the air.

2. Fir planks

Fir plank is a large-format thick board made of short timber through finger tenon jointing and length, and combining width. It is generally made of high-quality wood (more of which is made of fir wood, so it is commonly known as fir board) as the base material, and is made by high-temperature degreasing and drying, finger jointing, splicing, sanding and other processes.

3. MDF

MDF (also known as "fiberboard") is a kind of man-made board made of wood raw materials such as trunk wood, branch wood or other plant fibers as raw materials, which are made by hot grinding (grinding into powder), sizing (urea-formaldehyde resin or other applicable adhesives), drying, paving and hot pressing.

4. Multi-layer solid wood board

It is made of three or more layers of veneer or sheet wood glue and hot pressing. Splints are generally divided into six specifications: 3 centiplate, 5 cleat, 9 cleat, 12 cleat, 15 cleatboard and 18 cleatboard.

5. Particleboard

Particleboard (also known as "solid wood particle board") is a kind of man-made board made by cutting wood or other wood fiber materials into pieces of a certain specification as raw materials, drying them, mixing adhesives, hardeners, and waterproofing agents, and pressing them under heat, pressure and a certain temperature.

The above content reference: Encyclopedia - wardrobe plate.

The wardrobe doors are made of solid wood, shavings wood, lacquered wood, and glass panels, which can be selected according to the needs of decoration. At present, there are three kinds of wardrobe boards on the market: solid wood, paint, and fireproof. Among them, the solid wood wardrobe door panel is more popular, and the style is mostly classical, and its door frame is solid wood, mainly cherry wood, walnut and oak.

Cabinet door panel 1, solid wood.

When it comes to wardrobe information, it is naturally the best of solid wood, which avoids the excessive use of adhesives, is more healthy and environmentally friendly, has strong bearing capacity, is safe and stable, and has a long service life and is durable, but the cost of solid wood wardrobes is higher, so most of the wardrobes on the market use the method of board or solid connection to manufacture wardrobes.

Wardrobe door panel 2, large core board.

Large core boards, also known as blockboards, are good materials for wardrobe framing. The large core board is a plywood with a solid wood core, the inner layer is a core spliced with strip-shaped logs, and then pasted on the outside of the material manufacturing, the appearance is lubricated and flat, the stability is strong, not easy to deform, according to the thickness is usually divided into plywood, plywood and nine plywood, the thicker the higher the higher, can be selected according to the pressure and strength received.

Wardrobe door panel 3, high-density board.

High-density board is a commonly used wood-based board, is the wood, branches and other hair in the water soaked back, broken to limit the processing, uniform density, high strength, processing is relatively simple, but the disadvantage is that the moisture resistance is not good, kitchen and bathroom and other wet local should not be used, but used to make wardrobes is not bad.

Wardrobe door panel 4, solid wood particle board.

Solid wood particle board is made of solid wood into particles, and then limited by glue bonding, which retains some of the physical characteristics of solid wood, has a good nail holding force, light texture, and will not form too much pressure on the wardrobe, but the bearing capacity is not weak, and the cost is low and cost-effective, so it is also often used in wardrobe manufacturing.

Wardrobe door panel 5, crystal type.

The crystal plate is made of a base material plus white fireproof board and acrylic. The manufacturers of small workshops use plexiglass; The standard manufacturer uses acrylic, which is environmentally friendly and three-dimensional. The material enriches the design of the wardrobe, has a positive effect, and is deeply liked by a wide range of consumers.

Wardrobe door panel 6, solid wood type.

The use of solid wood to make wardrobe door panels, the personality is mostly classical, usually at a higher price. Its door frame is solid wood, mainly cherry wood, walnut and oak color. The door core is MDF veneer, and the manufacturing is usually made of high and low appearance on the surface of solid wood, and the exterior is sprayed with paint, and then the original wood color and beautiful appearance are adhered to.

This ensures the special visual effect of the solid wood, and the combination of the frame and the core ensures the strength of the door panel.

The wardrobe door is the door of the wardrobe, and its main components are the moving device (guide rail), the outer frame, and the panel. At present, the wardrobes on the market are colorful and very beautiful. So how much do you know?

Let's take a look. At present, the materials of wardrobe doors in the market are basically mainly plates and glass. - Plate The texture and color of the plate give people a natural and simple feeling.

Glass Glass doors give people an illusory feeling of crystal clear or hazy obscurity. - Imitation mahogany The natural and rustic mahogany texture is almost real, and the classical flavor is revealed between the moves. - Solid wood door is natural and environmentally friendly, expensive and at the same time, solid wood door has good sound absorption and can effectively play a role in sound insulation.

The color of most woods, with a focus on soft, warm colors centered on orange; Lignin, one of the main chemical components of wood, has a strong absorption effect on ultraviolet rays, and the subtle concave and convex surface tissues of wood can scatter light and reduce eye fatigue and damage. The wood is moderately soft and hard, warm to the touch, has good acoustic performance and functions such as temperature and humidity regulation, and wood processing is easy. "For more wardrobe decoration renderings, please click to view" The above is the relevant content introduced by the X group decoration network for you, I hope it will be helpful to you.