-
The mouse can move to indicate that the system has entered, it may be that the desktop program is damaged or malfunctioning and running wrong, you can press Ctrl+Alt+del (Delete) keys to open the task manager, click File-Run, enter if it is useless, you can only install the system, if it is still so, then send your computer to the repair center.
-
Generally speaking, this situation occurs when the capacitance on the main version is aging or some electronic components are aging.
-
Black Screen Issue: Hope it helps:
There are many reasons why a computer has a black screen, and the common ones are:
Shows poor contact of the data cable;
Poor graphics card contact or;
Poor CPU contact and overheating; "It is strictly forbidden to copy and repost, the eagle in the blue sky".
Poor contact of memory modules;
poor power performance;
The machine is infected with the CIH virus and the BIOS is refreshed destructively.
Microsoft black screen, please patch. Most of these problems are the relationship between the memory and the graphics card, loose or poor contact, just move it or use the eraser to wipe the gold finger of the interface
-
Here's how to fix it:Reason 1: Battery, power supply problems1, check all cables (including power plugs) to ensure that all devices are properly and tightly connected together.
2. Check whether the laptop has power (although most people will not make such a low-level mistake), because the notebook has a built-in battery, so it can be used without plugging in the power supply, of course, the time is limited, when the built-in battery is used up and not charged, it will cause the notebook to fail to turn on, at this time we just need to plug in the power to charge.
Reason 2: It may be caused by a virus infection, press and hold F8 to enter the advanced options page, select "Latest Correct Configuration", and then press Enter. After entering the system, run the anti-virus software, check and kill the virus, if there is a virus, restart the computer after the anti-virus, if it is not normal, it may be caused by the incompatibility of the device driver and the program, delete the graphics card, network card and other drivers, restart after removing the driver, if it doesn't work, then rule out this reason.
Reason 3: Hardware problem: Disassemble the notebook to check whether the hardware is loose, generally the hardware is not plugged in well, there will be an alarm sound, the long sound continues to ring means that the memory module is not plugged in tightly, one long and one short means that the memory or motherboard has a problem, one long and two short means that the graphics card is wrong. If there is too much dust inside the notebook, it is best to clean it up first.
In addition, pay attention to whether it is caused by the new hardware, if it is normal before the replacement of the hardware, and it is not normal after the replacement, then check whether it is compatible. If it doesn't start at this time, it's best to send it for repair, and a professional will check whether there is a problem with your hardware one by one. Reason 4:
Display ProblemsIf the power supply** is working, but the screen is still pitch black, try connecting another monitor to your computer (you can borrow one if necessary) to make sure it's not a monitor issue.
It is mostly the noise caused by the operation of the fan, the failure caused by more dust and more shaft mud, generally do a deep cleaning and maintenance, there are three steps to disassemble and clean the fan, one is to clean the ash, the second is to add lubricating oil to the fan, and the third is to replace the heat dissipation grease. Notebook hardware questions answered.
1. Check whether all the plugs of the power supply and the wires on the adapter of the notebook are firmly inserted into their respective sockets, if not, it means that the contact with the power supply is poor, just press the plug down again. >>>More
There are many reasons for a black screen, such as memory, hard disk, graphics card, motherboard, monitor, power supply, etc. First you have to start with the software, and then the hardware. Clause. >>>More
The computer has been stopped at boot and left in the motherboard logo interface, which means that problems were found in the self-test process of power-on, and they need to be checked one by one, and only after solving the problem can DAO enter the system normally. >>>More
1. Hardware: Immediately choose to enter the BIOS to see if the screen will be black, if it is also black, the hardware is faulty. >>>More