Smoke machine width problem? The range hood is widened on both sides

The difference between the side draft range hood and other range hoods is that the position of the range hood is still to be a cabinet, generally a conventional 800 cabinet, and the door is opened, because the upper half of the side draft range hood is hidden in the cabinet, and the opening at the bottom of the cabinet is opened on the spot, which means that the range hood is in place and then opened, and the depth (that is, the thickness) of the kitchen cabinet is also a conventional door panel 350, and the countertop to the bottom of the wall cabinet (hollow position) 750Here's a picture for you.

Personally, it is best to communicate with the kitchen cabinet designer, about how big the size of the wall cabinet on your smoke machine is, we usually do the wall cabinet on the smoke machine, if there is no special request, it can be made 900mm! The most important thing is to look at the design of your overall kitchen cabinet! From a personal point of view, I still like not to install hanging cabinets on the smoke machine, the left and right sides of the installation of hanging cabinets on the right and left sides can be, if your smoke exhaust hole is located above the ceiling, you don't need to design the wall cabinet, add a smoke machine to lengthen the pipe, but if the smoke exhaust hole is below the ceiling, it is best to install the wall cabinet above the smoke machine, in order to achieve the effect of blocking the hose!

It is recommended to communicate this problem with your kitchen cabinet designer in detail!

Not all smoke machines are the same size, you don't see it that way, you should first choose your favorite smoke machine look, measure the size and then find the manufacturer to design the overall cabinet for you!

The problem is to prevent hot and cold expansion, so do you want to leave some space.

Hello, it is a pleasure to serve you and give you the following answers:1Reason:

The widening of both sides of the range hood is due to the fact that the flue of the range hood is too narrow, resulting in the normal discharge of the flue gas, which affects the normal use of the range hood. 2.Workaround:

In order to solve the problem of widening the vertical side of the two bridges of the range hood, we must first check whether the flue of the range hood is too narrow, if so, the flue needs to be widened so that the flue can be discharged normally. 3.Steps:

1) Disassemble the range hood and check whether the flue is too narrow; (2) If the flue is too narrow, the flue needs to be widened, and you can use a wire saw or other tools to widen the Minda flue; (3) Install the widened flue back into the range hood; (4) After the installation is completed, check whether the flue is normal, if it is normal, you can use the range hood normally. 4.Personal Tips:

The width of the flue of the range hood is required to be 10-15 cm, if the flue is too narrow, it will affect the normal use of the range hood.

I've come across this question too much in Q&A, and I still don't know what kind of help my friends need.

If you only talk about range hoods, read the national standard GB T 17713-2011 "range hoods", and your heart will basically be the same. But many users are dismissive of the national standard for range hoods, so what's the point of consulting?

As far as the screenshot is concerned, the national standard only stipulates the preferred length of the range hood, from meter to meter, and there is no agreement on the width and height. The common products on the market, tower type (i.e. European type) and side suction type are mainly rice length, and deep type (Chinese type) is mainly rice type.

From my years of professional research, the first thing to consider when choosing a range hood is the diameter of the exhaust pipe (smoke pipe), and first of all, it must match the reserved flue. The specifications of the exhaust pipe are also given in the screenshot, and when purchasing products, you must give priority.

There are many styles of range hoods, and the length, width and height are not the same, some are thin and thick, there are single and double suction, come to the scene to observe and buy.

Different styles and sizes are also relatively different.

You can take a look at a certain treasure, your favorite style brand, which has introduced the size specifications.