Is the Panasonic light blue line a live line? Panasonic bath bomb how to wiring with remote control

In this case, the blue line is not a live wire, and the blue line is usually a ground wire, so you must pay attention to this aspect.

Not necessarily, whether the blue line of the Panasonic lamp is the line of fire depends on the specific situation, and only when you see ** can you analyze whether it is the line of fire.

The blue line of this lamp is not necessarily this live line, in this case, you need to look at different models, and then there are instructions to proceed according to this, because there may be other situations individually.

Under normal circumstances, the red line is the live wire, and the blue line is the zero line, so most wires are so distinguished, and I believe that this brand is also so stipulated, so it is better to follow this law.

If there is no red one, then the blue one is the fire line, and the yellow one is generally the zero line.

Is the Blue Line in midsummer the Line of Fire? If the blue line is in the blue line, he should not be in the line of fire, because the line of fire is red, and it is the line of fire.

The power cord of the lamp generally does not need to divide the positive and negative values, if the lamp is not lit after being connected, it can be reversed.

Panasonic Lamp Shan Shan, this should be the line of fire, and this should be able to ask some questions, this should not be able to make a debut at will.

He also has many different models of this, if you are not sure, it is best to consult the after-sales personnel and let them help you install it.

The blue line of the Panasonic light is the line of fire, the blue line is not the line of fire, the blue line is the zero line, and the red line is the line of fire.

Is the Panasonic light blue line a live line? Yes, right.

No matter how it is connected, it is the two wires of the safety switch, and there is no positive and negative pole.

There are drawings next to the body, just look at the drawings. 、

The blue wire is connected to the blue wire, and the white wire is connected to the white wire.

Here's how:

1. Turn off the main power switch first, connect the neutral line of the bath bomb directly to the neutral line of the 220 volt power supply, and glue it well.

2. Bath bombs generally have six lines: brown, white, yellow, black, blue, and red. The brown is the firing wire, and the other five are the lead-out wires, the control wires. The brown live wire and blue neutral wire of the power supply can be connected according to the legend.

The live wire of the 220 volt power supply is connected to one end of the three heads of the bath bomb switch strung together (the bath bomb switch has six connectors, three of which are strung together with two wires, and the incoming live wire is connected together), and the other three unconnected connectors are connected to the other two bath bomb lights and one light of the bath bomb. Once connected, power them up and you're done. As shown in Fig

Different brands of bath bomb wiring, the color of the wire is slightly different, you can refer to the wiring instructions of the bath bomb.

3. The neutral wire of the bath bomb is directly connected to the neutral wire of the 220 volt power supply, which is usually black.

I've seen it, the blue spot is likely to be caused by the reflection of light between the lenses between the lens cavities, and it should not be a quality problem of the camera. As long as you don't shoot directly at a strong light source.

If it is caused by CMOS, it must be sent for repair.

It's very rigid, it's more rigid, it's more rigid, it's more rigid, it's more rigid, it's more rigid.

I don't know, I'm too low-level.

Among them, there is a bridge to talk about the root of the spine is a two-color line, look carefully!!

The two-color wire is the grounding wire waiter.

The red line is connected to l, and the rest is done by yourself.

The black wire is the signal wire, the other two are the power wire, and the yellow and green wire is the ground wire.

Many old Panasonic outdoor computers with computer boards, you pay attention to it, change the general version and need to re-manage the cable.

The press and the external fan are the same line, and the wiring can also be routed from left to right in addition to the color wiring.

Look at the external host, whether it writes 220v or 110v.

Red is fire, blue is zero.

You can change the input interface and take a look. It's a signal issue.

It seems that the cable station is not transmitting an image signal.