What s the matter with the display light on the door of Jinghong s refrigerator?

1.The refrigerator temperature is too high, the temperature flickering is due to the temperature not reaching the set temperature, close the refrigerator door, the temperature is up, the light will go out, and the temperature will not flash.

2.If that doesn't work, open and close the refrigerator door a few more times. See if the switch on the display restarts.

3.If it doesn't work, you can only find after-sales. It must be an internal line failure.

If the light on the monitor is not turned off when the refrigerator door is turned off, then there may be a problem with the display light button on the refrigerator door, and you can check whether it is not sensitive.

The refrigerator door display light does not go off. The refrigerator door is currently open, so the light on the display is not extinguished, it is recommended that you check whether there is a problem with the sensor of the current door.

If the display light on the door of Jinghong refrigerator is not extinguished, it may be due to poor contact, it will not be extinguished, if the refrigerator door is closed, his display is in a state of being extinguished one by one.

The reason why the display light on the Jinghong refrigerator does not go out is because it is not extinguished in the first place, and then only in this way can the temperature in the refrigerator be displayed in real time.

You take a look at the manual to see how long the refrigerator's display is on and whether it can be set. If you can set it, you can adjust the time. If not, the light will never go out, that is, the sensor is broken, but it doesn't matter, don't delay the use.

The display light does not go off, indicating that the power supply is connected and the refrigerator has been in use during the refrigeration process.

Generally, when the door is not opened and closed, it will automatically close after a few minutes, and there is also a free energy that is set to be bright and can be set again.

The display light on the door of the Jinghong refrigerator does not go out, this may be a problem with your settings, you have not set the light to enter sleep mode.

The display light on Jinghong refrigerator does not go out, if it is not the design reason, then it is caused by the short circuit of the circuit board.

You must have been opening and closing the door, so the light wouldn't go off, and if you didn't open or close the door for a while, the light would go off on its own.

There is a display on the refrigerator that does not go out all the time, which may be a problem with the wiring inside, which cannot be automatically monitored.

If the display light on the door of the refrigerator does not go out, it is possible that the light of the monitor is malfunctioning. Please take a look at the specifics.

What's the matter with the display light on the door of Jinghong's refrigerator? If the light is not extinguished, it may not have reached the specified time, and it will go out by itself after a while.

The display light on the door of Jinghong refrigerator does not go out for a short time, as long as it is not touched for a long time, it will be extinguished.

Summary. It could be caused by the following reasons:1

The refrigerator door is not completely closed. Check that the door is closed tightly, and if the door is not fully closed, the light will stay on. 2.

The bulb is damaged. If the bulb is damaged or loose, the light will stay on. You can try replacing the bulb or re-fixing it.

3.The button is out of order. If the refrigerator door closes properly and the light is still on, it is possible that the button is out of order.

You can try cleaning the button or replacing it. 4.Faulty circuits.

If none of the above methods can solve the problem, it may be caused by a faulty circuit. It is recommended to contact a professional maintenance personnel for maintenance.

It could be caused by the following reasons:1The refrigerator door is not completely closed without a mudan.

Check that the door is closed tightly, if the door is not fast, it is completely closed, and the light will stay on. 2.The bulb is damaged.

If the bulb is damaged or loose, the light will stay on. You can try replacing the bulb or re-fixing it. 3.

The button is out of order. If the refrigerator door closes properly and the light is still on, it is possible that the button is out of order. You can try cleaning the button or replacing it.

4.Faulty circuits. If none of the above methods can solve the problem, it may be caused by a circuit fault.

It is recommended to contact a professional maintenance personnel for maintenance.

The display on the door does not go off.

It may be due to the following reasons:1Control Panel Failure:

If the control panel fails, it can cause the monitor to fail to turn off. Try restarting your fridge or contact the manufacturer for repair. 2.

Power issues: If there is a problem with the power supply of your refrigerator, it may cause the monitor to fail to turn off. Check that the power plug is plugged in tightly and try to replace the outlet.

3.Wrong settings: Some refrigerators may have a continuous display function, but Xiaochang thinks that specific settings are required to enable or disable it.

Check the owner's manual for detailed information. If none of the above methods can solve the problem, it is recommended to contact Rongsheng after-sales service or professional maintenance personnel for inspection and repair.

You can try my method above, if it doesn't work, you can only send it for repair<> thank you. Okay.

Summary. First, the door switch is faulty and the switch is in poor contact, you can repeatedly press the door switch a few times to see if the bulb can be lit, if it is on, it means that the door switch contact has an oxide layer, after a few more presses, the oxide layer falls off, and the switch is normal.

Second, the door switch is normal, but the light is not on, in this case, take off the bulb, you can check the quality of the bulb, if it really burns, you can change a bulb according to the original specifications.

What should I do if the light inside the door of Jinghong refrigerator is not on?

Hello, I am helping you to inquire about the relevant information and will reply to you immediately.

The first one, the door switch is faulty and the switch sock key is not good, you can repeatedly press the door switch a few times to see if the bulb can be brightened, if it is lit, it means that the door wheel imitation switch contact has an oxide layer, after a few more presses, the oxide layer has fallen off, and the switch is normal. Second, the door switch is normal, but the light is not on, in this case, take off the bulb, you can check the quality of the bulb, if it really burns, you can change a bulb according to the original specifications.

1.Brother Bing guessed that the temperature of the box was too high, and the temperature flickered because the temperature did not reach the set temperature, close the refrigerator door, and when the temperature arrived, the light went out, and the temperature did not flash.

2.If it still doesn't work, you can open and close the refrigerator door a few more times. See if the switch on the display restarts.

3.If it doesn't work, you can only find after-sales. The key type must be an internal circuit fault.

Hello dear. If the light on your Jinghong fridge does not turn on, you can try the following steps to solve the problem:1Check the power supply:

Make sure that the power cord of the refrigerator is plugged in tightly and that the socket is powered properly. Try unplugging the power cord and plugging it back in, or try using a different outlet. 2. Check the bulb:

Check to see if the ice chamber bulb is broken. You can try unscrewing the bulb to check for breakage or burnout. If you need to replace the bulb, you can buy a bulb of the same size to replace it.

3. Check the bulb holder: Sometimes the bulb holder may have poor contact with the local staff, resulting in the bulb not lighting up. You can use a pen or multimeter to test if current is passing through the bulb holder.

If no current is coming through, the bulb holder may need to be replaced. 4. Contact the after-sales service: If the above steps cannot solve the problem, it is recommended that you contact the after-sales service center of Jinghong refrigerator and consult professional maintenance personnel for maintenance or maintenance.

Please provide the model of your refrigerator, the time of purchase, and a description of the specific problem so that they can better help you solve the problem.

Hello! The plug-in ID of the Qinjinghong refrigerator keeps flashing the ridge code may be one of the following problems:1

Power issue: Check whether the power socket is normal, try to unplug the refrigerator and plug it back in again, make sure the plug is securely connected. 2.

Voltage problem: Check whether the circuit where the refrigerator is located is permeable and the power supply is stable, if the voltage fluctuates greatly, it may cause the display screen to flicker. 3.

Fault prompt: The flashing display screen may be a hint of a failure inside the refrigerator, it is recommended to consult the refrigerator's instruction manual or contact the after-sales service center to understand the specific meaning of flashing**.

Summary. Hello, glad to answer for you. Kiss, the reason why the plug-in ID of Jinghong refrigerator keeps flashing; Power Supply Problems Power supply issues can be one of the main reasons why your refrigerator's display screen is flickering.

If your refrigerator's power supply is unstable, then its display screen will flicker. You can try the following methods Handling Method 1: Check the power plug First, check if the power plug is plugged in tightly.

Hello, glad to answer for you. Kiss, Jinghong refrigerator pretended to be the first mountain plug-in ID has been flashing in the hall; Power Supply Problems Power supply issues can be one of the main reasons why your refrigerator's display screen is flickering. If your refrigerator's power supply is unstable, then its display screen will flicker.

You can try the following Fang Qin method Method 1: Check the power plug First, check if the power plug is plugged in tightly.

Replace the power cord If there is no problem with the power plug, then you can try to replace the power supply book. Sometimes a damaged or aging power cord can also cause the refrigerator's power supply to be unstable, which can cause the display screen to flicker.

There is no problem with the power cable,,, is there a problem with the main control board?

Dear, there is no problem with the power cord, but there is an abnormal fault in the main control board.

There is a stable 5V voltage to the display board.

Kiss, check whether the display screen is damaged if the display screen is faulty; Check whether the cable of the display is well connected and whether it is loose.

There are multiple lines, temperature control lines, etc., it is difficult to judge!! Is there a universal fault with this kind of machine?

Dear, this kind of machine has a universal fault is the power cord.