Why can t I speak when I plug in the headset but only the headphones ring? 100

Double-click the small speaker icon on the task sample, menu "Options--Properties", and select the microphone. and unmute in the properties window.

Control Panel - Sound & Audio Equipment - Voice - Test Hardware Just follow the prompts and you're good to go.

I'm in the same situation as you, you have to unplug the speaker and put on the microphone. Green holes.

There are two sockets, both of which should be plugged in.

The system's microphone is generally turned off by default.

You right-click on the speaker, adjust the audio attributes, advanced, tick the mic, and adjust the sound to the right one.

The microphone is not on.

You can set it by clicking on the volume properties.

Turn on the sound icon in the bottom right corner of the desktop.

Switch to the sound tab and remove the mic option to mute and see if there is any sound, if there is any, turn on the mute, go to the mic tab and remove the mic mute.

In the volume control, select the microphone in the properties and remove the mute option.

A very useful software for you. Fangtang sound control.

Because the microphone of the system is generally turned off, this software is fool-proof. And there's a mix effect, which is very practical.

I use it to chat with other people's QQ.

Double-click the small speaker icon in the lower right corner of yours, in the main volume options menu that pops up, Properties, adjust the volume, select the recording, and then OK, switch to the recording control interface, find the microphone, take a look at the selection below, tick the box, and you can also click on the advanced controls below to select the microphone strengthening.

After this setup, try it out, will your microphone work?

Check that the headset microphone position is not occluded. Plug the headset into another device and see if it can be used normally. Check that you are using original headphones. If not, test with original headphones.

1.First of all, you must confirm that the hardware is fine, the speaker and the sound card are also fine, confirm that all the cables are completely correct, and then turn on the speaker power, turn on the volume switch, and install the sound card driver correctly, if it is an onboard sound card, it is best to install the driver provided on the motherboard driver disk.

2.The working principle of the headset transducer principle: the headset is the left and right magnetic cores are wound around the coil respectively, and then equipped with two small iron sheets, the iron pieces will vibrate with the strength of the magnetism, so the sound is generated.

Since the coil is connected to the audio output interface, the current in the headphones determines the magnetic strength and the volume of the sound. Because a wire is broken, there is no current in the coil, and no sound can be heard. The radio is generally a superheterodyne type, in which the antenna coil is used to receive radio waves, because the radio waves are very weak, an antenna of tens of centimeters is needed to connect with it, the longer the antenna, the better the effect.

The cable plugged into the headset acts as an antenna. The sensitivity of headphones is very high, and only a small current can be passed through the coil to produce sound, and the audio output current of pocket radios is relatively weak, so it is just right to use headphones.

3.Microphone, also known as microphone, is a kind of electroacoustic equipment, which is a microphone, which is a transducer for acousto-electric conversion, which acts on the electroacoustic element through sound waves to generate voltage, and then converts it into electrical energy. It is used in various amplification equipment.

There are many types of microphones and simple circuits. There are two main points to grasp in the analysis of microphone circuits: signal transmission loop analysis, which is relatively simple, and the analysis of various microphone input socket circuits.

Microphone Signal Amplifier Analysis, Microphone amplifier is a small signal low noise audio amplifier, and it is not difficult to analyze the microphone level control circuit.

If you are using a vivo mobile phone and the earbuds cannot use the microphone function, you can try the following methods to solve the problem:

1. If you use the software to record, please turn on the recording permission of the software, the recording permission has been turned on, please back up the recording file of the mobile phone, enter Settings - Application and Permissions More Settings - Application Management - Display System Process - Recorder, clear the data cache of the recorder, and then restart the phone to use;

2. Check whether the earphones are fully inserted into the headphone jack;

3. Try replacing a pair of headphones;

4. Go to Settings - System Upgrade, some iQOO (Monster) UI and FunTouch models need to go to Settings - My Device - iQOO (Monster) UI version Funtouch OS version to detect and update the system.

Plug in the headphones to talk, the headphones come with a microphone, if you can't speak, it may be that the headset is broken or the mobile phone is microphone.

Headphones after headphones, earpieces. The conversion was carried out.

Check the jack of the microphone to see if it is plugged in incorrectly, insert the pink jack, the socket is not in good contact, try to plug it back in. The line input of the microphone, you can take the microphone to other good machines to try, if it doesn't work, then replace the headphones or repair.

The purpose of plugging in the headphones without what you said is very obvious, that is, to prevent the noise outside from affecting your hearing, but it does not mean that you can't talk after plugging in the headphones, but it is very good.

If you can't talk when you plug in the headphones, it may be that the headphones are broken, and you can also look at the settings of the headphones to see if there is a link that cannot be animated.

If you can't speak when you plug in the headphones, it means that there is a problem with the microphone of your phone or computer, or there is a problem with the sound card, you can try to detect it.

Why can't you speak when you plug in the headphones, it may be a problem with the headphones themselves, or it may be a problem with the mobile phone. You can try it with a different Bluetooth headset.

It may be that there is a problem with the microphone hardware, if it is broken, replace it with a new device. If the microphone is normal, you can do the following:

1. Click the volume icon in the lower right corner of the computer, right-click, and select "Recording Device".

2. Right-click "Microphone" and select "Properties".

3. Make sure that the device usage column shows "Enabled". If it is disabled, it can be enabled in the drop-down menu.

It may be that there is a problem with the microphone hardware, if it is broken, replace it with a new device. If the microphone is normal, you can do the following:

1. Click the volume icon in the lower right corner of the computer, right-click, and select "Recording Device".

2. Right-click "Microphone" and select "Properties".

3. Make sure that the device usage column shows "Enabled". If it is disabled, it can be enabled in the drop-down menu.

There are two situations for this headset of yours, one is that the jack of the headset is not compatible with the jack of the well, the host. The other is that there are some problems with this headset itself.

There are three ways to solve the problem of no sound when the headset speaks: interface problem, mute status, and microphone setting.

1. Interface problem: Plug in and unplug the microphone again, connect the microphone correctly, and make sure that your microphone (earphone) and the computer input and output terminals are 100% correct.

2. Mute state: Eliminate whether the computer is in the mute state, if the computer volume is set to mute state, the headphones cannot hear the sound. You can see if the speaker at the far right end of the taskbar in the lower-right corner of the screen is muted.

If this is the case with a lead deficiency, it is obvious that the computer system is in silent mode due to misoperation.

3. Microphone settings: small speaker in the lower right corner, right-click, the recording device will set the existing microphone as the default device during the recording process.

The role of the headset

A headset is an audio device that combines the functions of a headset and a microphone, which can be used to listen to music, answer**, and conduct voice chats. The volume can be adjusted on the headphones, and there is usually a volume control button on the headphone cable, which can adjust the volume as needed.

Headsets are becoming a must-have tool for gamers and sound recorders alike, capturing clear sound without being distracted by outside noise. At the same time, because they are head-fixed, they ensure that the trapping does not change the position of the recorder and cause inaccuracies in capturing sound. In situations where you need to control reverberation, volume and distance during accompaniment, a headset microphone is a powerful tool that allows you to adjust the sound accurately.