What are the advantages of a sprayer? Can the sprayer spray paint?

What are the advantages of a sprayer? Compared with manual work, the advantage of spraying machine is first: simple, before scraping putty, when we stir putty, we can use a mixer to complete, such putty is both uniform and moderately viscous, compared with manual comparison, the effect of manual mixing is much better.

Compared with manual work, the second advantage of the spraying machine: fast spraying, if you use a putty spraying machine, you only need a few minutes to complete a wall, you can completely spray it, and if it is a manual construction operation, the progress will definitely be much slower.

Compared with manual work, the third advantage of the spraying machine: uniform spraying, if you use putty spraying machine, because a certain air pressure and nozzle are used when spraying, the thickness of the spraying is easier to master, and there will be no unevenness, which is better than manual work.

Compared with manual work, the fourth advantage of the spraying machine: saving materials, if you use putty spraying machine, you can definitely control the spraying speed and thickness of the spraying machine, unlike manual construction, because there are too many people, and can not be controlled, so the use of machines is more economical than manual operation.

The above are the advantages of using spraying machines, in this society with rapid development of science and technology, we can not stand still, because the consequence of your standing still is that you will be surpassed by the people around you, and you will fall farther and farther until you are eliminated by the society, so we should accept a point of view that "machines instead of labor" is the general trend. Let's embrace the age of technology together.

Material savings. Save water and materials, and reduce costs by more than 20%.

The operation is simple, no need to build scaffolding, no need to move equipment, no need to repair stubble, yin and yang corners, and the roof can be sprayed freely, which shortens the construction period, improves the progress, and saves the expenditure of frame materials.

High efficiency and low labor intensity. The spraying machine is suitable for a wide range of applications, including: indoor and outdoor ceiling spraying, expansion joint leakage, settlement joint leakage, subway leakage, tunnel leakage, mine leakage, human room leakage plugging project, dam leakage plugging, floor, cracks, hollow drum wall reinforcement, cement, dry mortar spraying, etc.

Therefore, it has a strong adaptability and has been widely used.

The sprayer can be painted, but the model of the spray gun needs to be replaced.

Generally, it is not used like this, and the paint of the spraying machine is rough and colored, and it is easy to pollute the latex paint if it is not clean. The principle is the same.

The spraying machine is a special coating equipment using spraying technology, and the principle is to control the air flow to instantly promote the reversing direction of the air distribution reversing device, so that the piston of the air motor can make a stable and continuous reciprocating motion.

Pressurize the suction paint, and deliver the paint to the spray gun of the sprayer through a high-pressure hose, and the spray gun will atomize the paint instantly and release it to the surface of the coated object. The spraying machine is mainly composed of a feeding device, a spray gun, and an atomization generator. It is suitable for leather handbags, gift packaging, furniture, shoes, automobile manufacturing and other industries.

Notes:

The first thing to remember is to brush it:

Basically, when we use paint brushes to paint, hardware business network suggests that the best direction of brushing is to take up and down and then left and right to paint, and during the construction period, the paint brush can not be dipped in too much paint to prevent dripping. Basically, when it is coated with heavy anti-corrosion coatings, the distance between the paint brushes should not be too large to avoid the paint film being too thin.

The second thing to remember is to roll over:

Basically, in the process of using its cylinder for painting, the paint dipped in the cylinder should be evenly distributed. And basically in the process of painting, the rolling speed should be maintained at a certain level, not too fast.

Third, remember high-pressure airless spraying:

In fact, this is the fastest coating method, and according to the experts of the hardware business network, it can also obtain a very thick paint film. Therefore, in many cases, in order to better achieve the specified thickness of the paint film, it is recommended that you can use the construction method of airless spraying.

The high-pressure airless sprayer can spray paint, I used the A5 spray paint, which is pretty good.

It mainly depends on what paint you spray, the size of the workload, and the color? If you are spraying furniture paint, the high-pressure airless sprayer will definitely not work, you can only use the HVLP sprayer, with cups and pots without wasting paint. If you are a steel structure, you need to buy a high-pressure airless sprayer with a high flow rate.

Yes, I've used A5 spray paint.

You can spray paint, I use the SAN flag A5 to spray paint.

It can be sprayed, SAN Qi's high-pressure airless sprayer putty, latex paint, paint, paint, etc. can be sprayed.

The brands that spray machines are easy to use and durable are:1. Moisturizing strong heat dissipation spraying machine.

Recommended reason: The use of high-pressure airless spraying, the flow rate is larger, the paint atomization effect is more delicate, and the spraying effect is uniform and good-looking. With a thickened and enlarged aluminum alloy fuel tank, the heat effect is good and the use does not burn out.

2. Tiffan lightweight and portable spraying machine.

higher, thus doing more and earning more. And the lightweight design is more convenient to carry out daily, and the sense of use is light and labor-saving.

3. Tiffan spraying machine with high efficiency.

4. Build a multi-functional spraying machine in the world.

5. Lirun high-flow spraying machine.

Recommended reason: The use of large flow wear-resistant pump body can not only effectively improve work efficiency, but also prolong the service life of the machine. With a fan-shaped atomization high-pressure spray gun, the atomization effect is good, saving you more paint.

6. Lirun spraying machine with small temperature difference.

First, the scope is different.

1. Spraying: including air spraying such as spray painting, airless spraying, electrostatic spraying and various derivation methods of basic spraying forms.

2. Spray painting: Spray painting is a kind of spraying.

Second, the use is different.

1. Spraying: metal coating.

2. Painting: Through the economic development in recent years, the use has developed from repairing paint defects at the beginning to various industries such as molds, industrial machinery, toys, handicrafts, musical instruments, buildings, steel structures, advertising and publicity, logos, graffiti, etc.

Third, the characteristics are different.

1. Spraying: The production efficiency of spraying operation is high, and the spraying operation requires a dust-free workshop of one million to one hundred levels, and the spraying equipment includes spray guns, spray paint rooms, paint supply rooms, curing ovens and drying furnaces, spraying workpiece conveying equipment, defogging and wastewater, waste gas treatment equipment, etc.

2. Painting: The molecular structure of solvents, additives and resins used in painting is of great help to leveling.

Encyclopedia - Spraying.

Encyclopedia - Self-spraying paint.

Spraying machine is a kind of equipment that disperses the paint into a mist and sprays it on the surface of the coated object. There are three types of air sprayers, airless sprayers, and electrostatic sprayers. It is mainly composed of a feeding device, a spray gun, and an atomization generator.

High-pressure airless spraying uses a high-pressure plunger pump to directly pressurize the paint to form a high-pressure paint, and spray out the muzzle to form an atomized air flow on the surface of the object. Compared to air spraying, the paint surface is uniform and non-granular, and the paint is dry and clean due to its isolation from the air. Airless spraying can be used for the application of high-viscosity paints, and with clear edges, cutting oils can even be used for some spraying projects with boundary requirements.

Depending on the type of machinery, it is also divided into pneumatic airless sprayers, electric airless sprayers, and internal combustion airless sprayers.