The Goo machine is equipped with WiFi and is always looking for the device

Step 1: Open the browser of the computer connected to the current wireless router, enter part of the router in the address bar, check the bottom label of the router to know), log in to the web configuration interface of the current router, and the username and password are admin by default

Step 2: Under the network settings of the router, first find the WAN port setting option of the router. Setting the "type" correctly here is the crux of the matter.

There are two commonly used types: PPPoE and DHCP. Choose this according to your own situation.

If it is a home ADSL dial-up Internet access, choose PPPoE; If there is a direct network interface available, such as cell broadband or a hotel, DHCP is chosen

Step 3: If it is DHCP, there is no need to make other settings, and the router will automatically obtain the corresponding network settings. If you choose PPPoE, you need to fill in the correct username and password, which are provided by network service providers, such as China Telecom, and if you forget your password, you can call 10000 for manual consultation.

Step 4: Next, check the LAN port settings of the router. The settings of different brands are actually similar, the most important thing is to turn on the DHCP function, so as to ensure that the router can assign an IP address to the device when it is connected to the LAN port or connected to WiFi, and the IP address range assigned by DHCP should be in the same network segment as the IP address of the router, for example.

Finally, check your router's security settings. Check to see if you have enabled some security policies that restrict MAC or IP address connections, or the corresponding rate limiting policy, if yes, turn it off, otherwise only devices with specific MAC or IP addresses can connect!!

If you configure wifi for the first time, you must first open the bottom button and select cloud mode. A small note will be printed, scan the app with your mobile phone***** log in according to the prompts, open the app and scan it again***, press and hold the coo machine for 6 seconds according to the prompts, and the display starts to configure wifi, and enter the wifi password according to the prompts. Configuration complete!

1. Check the manual, check whether it supports connecting to wifi, if it does, please follow the manual to connect.

2. Or directly consult the dealer or official customer service to inquire if it is connected to wifi.

233 just bought the coogu chicken g1 today, which also has this problem. I just tossed around for a while and figured it out

Turn on Bluetooth and locate things

The best above is really a god's blade cute pet,If the goo machine is configured with wifi for the first time,You have to open the bottom button first,Select cloud mode。 A small note will be printed, scan the app with your mobile phone***** log in according to the prompts, open the app and scan it again***, press and hold the coo machine for 6 seconds according to the prompts, and the display starts to configure wifi, and enter the wifi password according to the prompts. Configuration complete!

Check out the way to connect your device with wifi:

1.The system is connected to a wireless router wifi.

2.Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface.

3.Go to the connection status page in the wireless settings to view the list of hosts currently connected to wifi.

Use the computer's 360 guard to have a traffic firewall in it, open the traffic firewall, and there is an anti-rubbing network in it, just use that to check.