-
Anonymous users2024-02-07There are many reasons why monitors tend to get blurry, but the most common is that the CRT is aging!
In addition, the screen will become very blurry when the picture tube is wet, but it will return to normal with the temperature increase after a while, so you can also judge whether the fault belongs to the former or the latter.
More serious are the internal components, such as the failure of the inverter, the magnetization of the picture tube, the dust on the tube base, and then there may be a problem with the focus of the electron gun. This requires more professional maintenance personnel to open the cover for repair.
-
Anonymous users2024-02-06Generally, it should be the possibility of aging or magnetization.
You can check if there is anything with a strong magnetic field next to it.
It could also be a problem with the electron gun focusing, which can generally be fixed for tens of dollars.
-
Anonymous users2024-02-05It's blurry when it's cold, it's good when it's hot, or it's blurry when it's hot, it's good when it's cold.
It's okay, hold on... That's how I learned computers before :)
If this is the case, turn on the monitor, there are two adjustable ones on the high-voltage pack, adjust them with an electric pen, and be careful not to get electrocuted.
-
Anonymous users2024-02-04Is it on a cloudy day or is it always like this! I think there are two of these cases! 1.Maybe it's damp! 2.It's also possible that the display is aging! If you want to tell the difference, try it on another computer!
-
Anonymous users2024-02-03Damp? Or magnetized, you try to degauss.
-
Anonymous users2024-02-02The CRT of the display is aging and can be replaced.
-
Anonymous users2024-02-01Is the monitor in a humid environment? Caused by moisture.
-
Anonymous users2024-01-31If the pipe doesn't work, it may also be an inverter.
-
Anonymous users2024-01-30How to deal with the blurry screen of the computer monitor:
1. Adjust the resolution to the best resolution Generally speaking, it is pulled to the highest 2. The resolution is adjusted or not clear, that is, there is a problem with the screen or a problem with the connecting cable.
It may be that the wiring of the monitor is not plugged in
Right-click on the desktop --- Properties--- settings--- adjust the screen resolution.
If you can't adjust the 'screen resolution', it is the antivirus time that destroys the graphics card driver.
program, reinstall the graphics card driver.
Turn up the resolution a bit.
Do you know if you're talking about the screen resolution or the font is too small for you to see clearly, generally it's not clear because your resolution is not very good, and now the resolution of mainstream machines can reach more than 1400, you adjust it and try it.
Desktop right-click - Properties - Settings - Screen resolution (s) - Drag to the right - Drag to 1024*768 or more, try again, it is not clear and then drag to the right.
It may be caused by your eyes looking at the computer for a long time! If not, you can adjust the resolution!
That's the resolution is set incorrectly, see how many inches you are on the monitor 19 inches: 1440x900 22 inches: 1680x1050 23 inches:
1920x1080 These are the standard resolutions of widescreens, and there is also a possibility that the graphics card will be a little blurry if it is not plugged in tightly.
Can't see clearly with glasses. Not yours. The problem is that you just adjust the resolution, otherwise you will install the graphics driver.
How to deal with the blurry screen of the computer monitor 2:
Detection driven. A good driver plays an important role in the display of the graphics card, it is the right-hand man of the graphics card, and the graphics card will not show its "potential" if it leaves the driver or the driver is not updated!So, it's common sense that the graphics card's drivers need to be installed or updated!
Detect the graphics card. The quality of the graphics card itself also plays a decisive role in the quality of the display, just as a good CPU plays a decisive role in the speed of the computer. And for discrete graphics cards vs. integrated graphics cards.
Of course, the processing power of the discrete graphics card is much stronger. Therefore, I personally think that if you want to get high-quality realistic images, you should first choose a separate display.
Signal lines. If the image signal passes through a VGA split converter.
If it is divided into two ways, then this may be the main reason for the unclear screen of the display. For this reason, I recommend removing the VGA bisect converter when necessary and directly using the VGA cable of the monitor.
Connect to the VG port of the host computer.
Display. The quality of the display also affects the quality of the picture to a certain extent. A good monitor will display a high quality picture. Therefore, when buying a monitor, you can choose a monitor according to the quality of the brand.
1. When the computer is first turned on, the screen of the monitor shakes very much, and sometimes even the icons and text cannot be seen clearly, but it will return to normal after a minute or two. >>>More
I guess it's either the display is aging, or there is a magnetic field, try to remove the magnetism, good luck!!
Neso's 786II, which my friend has used, is similar to the MAG796 FDII I used, both of which are diamond tubes, and the phone will not shake for an hour when I play next to it. >>>More
1. There is a problem with the monitor.
2. In the desktop anti-mouse - properties - settings - advanced - monitor - screen refresh rate there one by one tune is too fast. >>>More
I think it's a power issue, or an issue with the display refresh rate. Magnetic field interference affects the display image distortion and not just image flickering!