Please tell me how to fold paper lanterns

Paper lantern handmade origami requires the preparation of tools and raw materials:

Two sheets of equally sized rectangular paper (A4 paper size).

How to make your own lantern steps:

1. Fold the paper into 8 equal parts according to the folded line.

2. Fold the paper into 16 equal parts, fold the mountain fold and valley fold alternately to make a wave crease, and 3. Fold the lower right corner to the second layer of creases.

4. Open the crease in the lower right corner, and fold the layer back, starting from the 3rd layer, fold the lower right corner towards the crease of the 4th layer.

5. The other layers are folded in the same way, and finally the paper is completely opened to form the crease shown in the figure below.

6. Fold the lower right corner towards the crease of the third layer.

7. Open the crease in the lower right corner, and fold the layer backwards, starting from the 3rd layer, fold the lower right corner to the crease of the 5th layer, 8, fold two layers backward each time and fold 3 layers forward. When you fold to the last two layers, you still fold three layers forward.

9. Completely complete the paper to form the crease in the figure below.

10. Fold the opposite side in the same way, and form the crease in the following figure after the paper.

11. Fold the paper according to the crease.

13. Both sides should be folded in the same way according to the creases.

14. Take another piece of paper and fold 16 equal parts alternately in the valley. Note: The wavy crease is the opposite of the first one, please compare the schematic diagram of this step with the schematic diagram of step 2.

15. Fold the 1st layer backwards, starting from the 2nd layer, and fold the lower right corner towards the crease of the 3rd layer.

16. Open the crease in the lower right corner, fold the layer backwards, start from the 4th layer, and fold the lower right corner to the crease of the 5th layer. Fold two layers backwards at a time, and then two more layers forward.

The first step is to make a skeleton. The relatively simple shape of a paper lantern is a cube or cylinder, and it is best to use bamboo branches or bamboo bark that can be bent to form a frame, and tie the joints with thin wires. If you can't find it, you can also use slender strips of cardboard and bamboo skewers for barbecue, which will lack firmness and flexibility, but they are also very good decoration for the interior.

The second step is to make the lamp body. Buy a few pieces of white or red ordinary rice paper or sprinkle gold rice paper at the Four Treasures of the Study, cut them to the length and width of the lantern skeleton, and then you can design your own patterns. Calligraphy, painting, and paper-cutting can all be displayed on a small lantern.

After pasting, you can also use narrow strips of imitation silk paper to edge up and down, which looks more elegant, much like an ancient palace lamp. If you are not very good at calligraphy and painting, there is a simple way to refer to it. Use a piece of tissue paper to trace the desired character on the notebook, then overlap the tissue paper with crimson rice paper, and use a single-edged blade to dig out the handwriting.

When the tissue paper is removed, hollowed-out handwriting appears on the red rice paper. The body of the lamp is made of white rice paper, and the red rice paper is pasted inside, and the candlelight or light is reflected from the hollow, and the effect is quite beautiful.

The third step is to make a light source. If you put it indoors, you only need to light a regular candle in a lantern; If you want to carry it out, it's best to make a simple circuit with a light bulb and a battery.

The paper lantern is made as follows:

Tools Ingredients: six squares of colored paper, one tassel, glue.

Method Steps:

1. First prepare six squares of colored paper and take out one of them. Fold left and right in half, then fold up and down in half.

2. Then fold the four corners of the colored paper towards the center to fold a new square.

3. Then fold the four corners of the new square to the center again.

4. Open the bottom right corner and fold it into a small square.

5. The other three corners are also folded in the same way, so that there are four small squares.

6. Next, take the diagonal line as the middle line, and fold the corners on both sides of the small square in the middle, for a total of eight corners.

7. Then open the eight corners and fold them downward.

8. After that, the right angle of the lower right of the two colored paper is backward, and the other three right angles are also folded in this way.

9. After that, fold five more pieces of colored paper in the same way.

10. Then glue the six origami together, one on the top and one on the bottom, and four in the middle to form a spherical shape.

11. Finally, pass the tassels through the middle of the sphere, so that the paper lantern is ready.

1. Fold the paper in half evenly to form a crease of the word "ten";

2. Fold the corners of the four sides into the middle corner;

3. In turn, fold the corners of the four sides evenly into the middle;

4. In turn, fold the corners of the four sides evenly into the middle;

5. In turn, open the upper and lower corners;

6. This cute and simple lantern origami is complete.

1. The lantern means reunion and prosperity. Lanterns are also collectively known as lanterns, lanterns originated in the Western Han Dynasty more than 1800 years ago, in the past, people with conditions would hang lanterns, usually during the Spring Festival and Yuan Festival. Lanterns are closely connected to the lives of Chinese, and there are lanterns everywhere in temples and living rooms.

People hang red lanterns, which symbolize the meaning of reunion, to create a festive atmosphere. Later, the red lantern became a symbol of Chinese festivities.

2. Chinese lanterns, also known as lanterns, are ancient traditional handicrafts of the Han nationality. Originated in the Western Han Dynasty more than 2,100 years ago, around the Lantern Festival on the fifteenth day of the first lunar month every year, people hang red lanterns symbolizing the meaning of reunion to create a festive atmosphere.

The origami method of lanterns is as follows:

1. First cut the red A4 paper from the middle, fold half of it up and down about 1cm, and paste double-sided tape on the folded place.

2. Then use a knife to draw every 5m on the red paper bridge bucket, the more accurate the stroke, the better the file grinding, and put the edge for later use.

3. Then cut the yellow one into a 11cm wide rectangle, paste double-sided tape on the rectangle, and roll it into a barrel.

4. Then put the double-sided tape on the red paper, align the red edge of the jujube with the four tubes, and glue the double-sided tape on the upper and lower edges of the round tube.

5. Next, cut the red paper under the 5cm rectangle, fold it at the top 1cm, paste the double glue, and cut out the lamp.

6. Immediately after rolling the lantern on the rope, use two 6cm yellow squares to make the top and bottom of the lantern, and pass the finished lantern through the bottom of the lantern.

7. After wearing the lantern well, glue the lantern, and then pass through the top of the lantern, and glue the top well.

The benefits of doing crafts for children.

Origami can exercise children's finger dexterity and develop children's hands-on ability. Cultivate the good habit of children doing things carefully and in a step-by-step order. Develop your child's observation and attention.

Due to the extremely malleable nature of origami, it can be said to be ever-changing. After the child folds an origami work, he and she will have a sense of success, and in the process of folding in the future, this sense of success will continue to accumulate.

The origami method of the lantern is as follows:1. Prepare cardboard, scissors, stapler, glue. Roll up the red cardboard and nail it well.

2. Fold another piece of red cardboard to the orange, draw a dotted line and cut it out.

3. Make a round and defeat some decorations, and the lanterns will be more vivid.

4. The simple and good-looking lantern is ready!

Expand knowledge: 1. Chinese lanterns, also known as lanterns, are ancient Han traditional handicrafts. After thousands of years of development, lanterns have developed different regional styles, each with a unique artistic expression.

Every year around the Lantern Festival on the 15th day of the first lunar month, people hang red lanterns that symbolize the meaning of reunion to create a festive atmosphere.

2. The lantern combines painting, paper-cutting, paper tie, piercing and other crafts, and has become a symbol of Chinese festivities. Through the inheritance and development of generations of lantern artists, a rich variety and superb craftsmanship have been formed. From the types there are palace lights, yarn lights, etc.

In terms of modeling, there are figures, landscapes, flowers and birds, etc., in addition to the marquee lanterns for people to enjoy.

3. The lantern is a kind of lamp and lantern in ancient times, and the reason for the use of lanterns was recorded as early as the Tang Dynasty in the eighth century. The existence of lamps in China was after the Qin and Han dynasties, and the existence of paper lanterns may have been after the invention of paper in the Western Han Dynasty and the improvement of paper by Cai Lun in the Eastern Han Dynasty. The custom of watching lanterns during the Lantern Festival originated in the early years of the Han Dynasty, and it was to celebrate the peace of the country and the people.

The paper lamp building is folded as follows:1. Fold the paper in half, take a square and fold the other side in half. When taking a square""Hand handicap party" can be cut with the help of knives.

3. Fold the four corners down in turn.

6. Fold it slightly in half to the middle line, blow it into the hole, and it will be a lantern when it is puffed up.

How to fold paper lanterns is as follows:1. For a square piece of paper, fold a cross first. (Fold along the two midlines) 2 and the four corners are folded towards the center point.

3. Turn it over to the back.

4. The four corners are folded towards the center point again.

5. Turn it over again.

6. The four corners are folded to the center point again.

7. Turn it over for the last time.

8. Stretch the upper and lower parts apart and flatten them, and a simple lantern origami is complete.

You can do handicrafts with children, simple and fun origami lanterns, you can also exercise the baby's hands-on ability, you can also try to make a small origami lantern during the Spring Festival, the new year will be prosperous, thriving.

The paper lamp building is folded as follows:

1. Fold the paper in half, take a square and fold the other side in half. When taking a square""Hand handicap party" can be cut with the help of knives.

3. Fold the four corners down in turn.

6. Fold it slightly in half to the middle line, blow it into the hole, and it will be a lantern when it is puffed up.