How to set up the wireless network card and the local connection network card to use at the same tim

To open the Network and Sharing Center interface, you can right-click the network icon in the taskbar and select Open Network Sharing Center from the pop-up context menu.

From the "Network and Sharing Center" window that opens, click the "Change Adapter Settings" button to enter the detailed network connection settings interface.

At this time, the "Advanced Settings" interface will open, switch to the "Adapters and Bindings" tab, select the "Wireless Connection" or "Wired Connection" item in the "Connections" list, and click the "Move Up" or "Move Down" button to adjust the network connection priority.

Typically, the connections that are above the Connections list are used first, as shown in the image, when a Local Connection (i.e., a wired connection) is available, this wired connection is used first. When a wired connection is not available and a wireless connection is available, it will automatically turn to a wired connection to access the network.

At the same time, the order in which the computer accesses information on the network can also be set, so as to achieve more efficient network access function. Switch to the Order of Providers tab, where you can set the order in which programs access the network.

Generally, you can use it without setting it up.

Turn both on at the same time in the Network and Sharing Center, and you're good to go. Here's how:

1.Click Start to open the Control Panel.

2.Click Network & Internet

3.Click to open the Network and Sharing Center.

4.On the left, click Change adapter settings.

5.Right-click on a local losing streak to open the properties.

6.Double-click"Internet Protocol version 4"Options.

7.Open the IP address setting window, select Manually set the IP, and fill in the IP address of the local connection network card, the subnet mask, the gateway, and the DNS according to the actual situation of the company's intranet IP.

8.In Change adapter settings, set up Wi-Fi Connection, right-click Wi-Fi Connection, and open Properties.

9.Double-click"Internet Protocol version 4"Options.

10.Open the IP address setting window, select Manually set the IP, and fill in the IP address, subnet mask, gateway, DNS, etc. of the local connection NIC according to the actual situation of the intranet IP of Chaqifan Company. Click OK to save, and the local connection and wireless network card can be used at the same time.

1. The wireless network card and the local connection network card cannot be used at the same time, and can only be used first.

2. If it is a wired connection to the internal network, and the wireless connection is to the external network, then you need to set up routing rules in the computer.

1. For example, the IP address of the local LAN intranet is , and the gateway of the local LAN is then add a routing rule to let all access 10*.Access to the gateway of the current local LAN is routed.

This does not affect the Internet access and can also access the intranet.

2. Increase method:

Start --Run --cmd

route add -p mask

Of course, you can, you need to set up routing rules on your computer.

I'll give you an example, you don't understand to give me a reply

For example, if the IP address of your local LAN is the gateway of your local LAN, then you add a routing rule to allow all accesses10*.Access to the gateway of your local LAN is gone.

This does not affect the Internet access and can also access the intranet.

Method of addition: Start --run --cmd

route add -p mask

I can't understand the reply、。

It's not set up on your computer.

Buying a TP Link wireless router is also about 80 pieces apiece.

In the network adapter, select the two devices and right-click to bridge them

Simultaneous wired and wireless connections are not only not fast, but may also affect your internet speed.

Solve your problem in three steps:

1. You must buy a wireless router, recommend D link (about 250 yuan), this feature is strong penetration, stable signal, which is very important for wireless Internet access, if you buy a wireless router, it will often drop the line.

2. Configure wired network: connect the network cable you came from the cat to the corresponding interface of your wireless router, and then connect the network cable of your host to any wired interface of the wireless router (a total of four wired interfaces), and finally connect according to the wired connection method of the wireless router manual, which is similar to the ADSL connection you set up, and you also need to enter the username and password given by Netcom. At this point, the wired connection is complete.

3. Configure the wireless network: operate according to the manual, pay special attention to the fact that if you choose the default encryption method of the router, you can not connect to the WEP method that can be used instead, after your router is set up, open your book, enable the wireless network card tool that comes with the book, search for wireless network, you will find your wireless router, and then click on the connection will ask you to enter the password you just set in the wireless router to connect to the wireless network normally.

That's fine. Isn't it the first thing to make sure that each individual network has access to the Internet?