-
Doors for most residences.
Windows are not designed to be load-bearing, usually no more than 400 kg per square meter, so in the decoration.
Doors and windows should be aware of their load-bearing. Decoration storage should not exceed its load, and try to put as little heavy furniture as possible.
so as not to pose a danger. Room.
There is a wall between the doors and windows, the doors and windows on the wall can be removed, the half wall under the window can never be demolished, it plays a role in supporting the doors and windows in the building structure, if demolished, it will seriously affect the safety of doors and windows, and even cause the collapse of doors and windows. When sealing doors and windows, try not to poke out the doors and windows in order to expand more space, and decorate the net.
There are many examples of the same that prove that this is not only dangerous, but also unsightly, and the property management department will not allow it.
Many homes have faucets on their doors and windows.
Place the washing machine.
After washing, the laundry can be dried directly, or a sink can be set up in the door or window as a kitchen.
use, which must do a good job of doors and windows on the ground.
waterproofing layer and drainage system. If the drainage and waterproofing treatment is not good, water accumulation and leakage will occur.
Doors and windows are places where the residence receives light, absorbs fresh air, and conducts outdoor exercise, viewing, cooling, and drying clothes. It is generally divided into three categories: cantilevered, embedded and cornered.
Now the new residential class has 2-3 doors and windows, before the decoration to distinguish the main doors and windows, secondary doors and windows, clear the function of each door and window. General with the living room.
Master bedroom. The adjacent doors and windows are the main doors and windows, and the function should be based on leisure and fitness, which can be installed as a gym.
Tea room, etc., decorative materials for walls and floors.
It should also be consistent with the living room; Secondary doors and windows are generally with the kitchen or with the living room and master bedroom.
outside the room.
Adjacent, mainly for storage, drying clothes or when visiting, decoration can be simpler.
The quality of door and window packaging is the key in door and window decoration. Pay attention to its wind resistance and install it firmly. It must be sealed, otherwise it is equivalent to no sealing. The lower mouth of the window sash is the most prone to water seepage, generally reserved 2 cm gap under the window frame, with special sealant or cement.
Fill it to death. If there is a window sill, let it be sloped outward.
-
First, the order of external doors and windows should be in advance.
Exterior doors and windows have a certain order cycle, and after installation, they also need follow-up treatment by bricklayers and oilers, so they need to be ordered in advance.
2. Familiarize yourself with the common types of exterior doors and windows.
According to the different materials, there are three common types on the market: wooden windows, plastic steel windows, and alloy windows. Wooden windows are easy to deform, moth-eaten, and have high cost, and are not commonly used now; Plastic steel windows and alloy windows have occupied the main market.
-
Most of the family's decoration will replace the doors and windows, in the end whether to replace the doors and windows also depends on the specific situation, some situations are suitable for replacement, some situations do not need to be replaced. The original doors and windows are plastic steel doors and windows or ordinary aluminum alloy doors and windows, the sound insulation and sealing performance is not good, and the quality is poor, especially the house near the roadside, if the sound insulation is not good, it will have a great impact on living in. There are also some windows that do not seal well, and air will enter when the windows are closed.
In these cases, doors and windows may be replaced when decorating.
<>We all know that developers are equipped with anti-theft doors when handing over the house, but according to the quality of the community, the quality and grade of the anti-theft doors installed by the developer are also different, and some anti-theft doors are of poor quality so they have to replace the anti-theft doors. The increasingly serious smog and noise often affect our health at any time, and there is smog and noise at home, how can we talk about comfort. The source of smog and noise comes from the unsealed and soundproof windows in the home.
At present, many home doors and windows security accidents occur frequently, most of the burglary cases, are thieves through the exterior wall doors and windows into the house, the light loss of property, the serious injury to the person, which is generally not solid exterior wall door and window profiles, simple glass and poor accessories are related. More and more owners will choose regular door and window manufacturers, qualified hardware accessories, safety and environmental protection to replace new doors and windows when decorating or renovating new houses.
It is also because of the cost, the accessories of the doors and windows of the original building are generally cheaper accessories, not to mention the poor feel, and the quality is poor, easy to rust and break, and easy to cause danger. In order to save costs, most of the raw materials used in the original doors and windows are ordinary building profiles, not to mention the poor feel, and the quality is poor.
The original building doors and windows only play a basic function of isolation from the outside world, and the conditions should consider the comprehensive factors such as beauty, multi-function, and safety, so it is recommended that the doors and windows can be replaced according to themselves if they are conditional.
-
If the doors and windows are too bad, you can consider replacing them, or if they don't meet your own decorative style, you can also replace them, and if they don't meet the requirements, you don't need to replace them, which means that the doors and windows meet your requirements.
-
A new house is renovated. That is, the developer has already installed the windows for us, and we decide whether to replace them according to the quality; Second, the old house is renovated. According to the quality of the existing windows, consider whether to replace them.
If it is a rough house, it is recommended that you choose to change the window; Design the windows according to your own preferences and functions, and you don't need to do indoor protection when installing, which is highly manufacturable.
If it is a hardcover room, it depends on the material of the window. If the developer reserves a plastic steel window, it is best to replace it for long-term use; If the developer reserves aluminum alloy windows, it is necessary to check the profile thickness of the aluminum alloy windows to determine whether they need to be replaced.
-
When renovating a second-hand house, doors and windows do not have to be replaced. If you want to save a little money, you can also do without changing. But I think it's better to change it, after all, it's all redecorated.
-
Not necessarily, if it's not very old, you can not replace it, and that's fine.
-
1.When decorating, because the process of removing windows will damage the indoor and outdoor walls, it is best to replace the doors and windows before proceeding to the next step of decoration. The owner should be clear which brand of profile to choose, because the quality of the profile will determine the grade, sealing and aging resistance of the entire door and window, Aowei doors and windows are recommended to choose a brand with quality assurance.
2.When purchasing, you must go to the regular building materials market, the processing equipment of the small workshop is simple, and the accuracy and strength cannot be guaranteed at all.
3.The exterior color of plastic doors and windows should be blue-white. If the color is too white or gray, it means that the stable components in the material are not enough, and it is easy to age and turn yellow over time.
4.Check whether the hardware is flexible and smooth.
5.There should be aluminum slide rails in the lower part of the sliding window frame to facilitate its replacement.
6.The sealing strip of the casement window should be freely replaceable, as the sealing strip has a shorter life than the window.
7.There should be a fixed piece in the middle of the sealing strip of the sliding window and sash, which is the key to the sealing of the sliding window.
8.During installation, the correction of the horizontal and vertical directions of the doors and windows should be supervised. The window frame and the wall should be filled with styrofoam, and the inside and outside of the window frame must be sealed with silicone copper glue or sealant to prevent water seepage.
After installation, the protective film must be removed, otherwise it will reduce the service life of the doors and windows.
-
Brand system doors and windows are OK, depending on personal preferences, the cost performance of Kemet I use is good.
-
First, the material of the door and window frame is determined
1) For medium and high-end home decoration, it is recommended to choose aluminum alloy and broken bridge aluminum for window replacement, because it has the functions of light texture, strong wind pressure resistance, good air tightness, and basic door and window insulation and noise reduction.
2) For medium and low-end home decoration, it is recommended to choose plastic steel windows for window replacement, because it is affordable and relatively suitable for general home decoration.
Second, the material of door and window glass should be selected
1) The optional glass types for replacing doors and windows are: insulating glass, vacuum glass, and vacuum laminated glass.
2) Some other types of glass are the above three types of glass combinations, such as "vacuum & hollow" combination, "vacuum sandwich & hollow" combination, "double vacuum" combination, etc.
Third, the quality of door and window hardware should be optimistic
In the actual use process, the opening methods of different doors and windows need to be matched with different types of hardware, such as handles, hinges, handles, lock points, locators, sealing strips, etc., so you must look at the quality of these hardware before replacing the window, identify well-known brands, and prevent merchants from shoddy after placing an order.
Fourth, the opening method of doors and windows should be set
In fact, there are many ways to open doors and windows, the decoration of a house is not limited to one opening method, and can be combined according to the actual situation of your home, such as a window, which can be fixed in half and the other half in casement.
-
There is no way to renovate the aluminum alloy windows that have been installed and used, and if they can be done, it will cost more than installing new windows!
-
That's all there is to look out for.
-
Hello, glad to answer for you! 1. The removal of doors and windows is a laborious operation, if it is a high-rise, special attention should be paid to the safety of construction personnel. 2. When removing doors and windows, there should be special security personnel to serve as security, and set up safety signs to ensure their own safety and the safety of others.
3. When the doors and windows are demolished, it is necessary to avoid the situation of smashing the demolition with a sledgehammer to avoid damage to the wall structure. 4. If the original wall is damaged and needs to be corrected, it will greatly increase the cost of construction.
-
In the decoration of old houses, doors and windows are a very important part, they not only affect the comfort and lighting of the living room, but also related to the aesthetics and safety of the whole house. Therefore, it is very important to choose the right doors and windows for old house decoration.
1.Material selection.
The selection of materials for the decoration doors and windows of old houses should comprehensively consider many factors, including use scenarios, quality, aesthetics, thermal insulation performance, etc. Generally speaking, windows can be made of wooden windows, aluminum alloy windows, plastic steel windows, broken bridge aluminum windows, etc., and doors can be made of wooden doors, steel doors, sliding doors, etc.
For the decoration of old houses, it is recommended to choose aluminum alloy windows, because this type of window is not only durable and durable, but also can play a role in anti-corrosion and anti-rust outdoors, which can meet the different sizes and shapes of old houses.
2.Color selection.
The color selection of the doors and windows of the old house decoration should be combined with the whole home style and decoration style, and the overall home style color should not be incoordinated, resulting in a sense of visual incongruity.
Generally speaking, you can choose light or dark doors and windows, light colors can bring a bright and warm feeling, and dark colors are more calm and solemn. At the same time, it is also necessary to pay attention to whether the decoration style of the surface of the doors and windows is consistent with the façade style and hall decoration of the interior of the house.
3.Technical material selection.
In the current door and window market, the technical content is very high, and the choice of high-tech doors and windows not only has the effect of anti-theft, fire prevention, wind protection, etc., but also saves energy and brings better indoor lighting. Therefore, the doors and windows of the old house decoration can be selected with advanced technologies such as multi-point locks, filling insulation materials, and sealing glass, which can bring better use experience and quality assurance.
In short, in the decoration of the old house, the choice of doors and windows is a very important one, and it is necessary to fully consider the material selection, color matching, technical material selection and other factors, in order to be able to select doors and windows products that meet the overall decoration style and personal needs.
-
The renovation of second-hand housing is something we must pay attention to, and a good second-hand housing can also improve our quality of life. For the renovation of second-hand houses, one of the most important is the renovation of doors and windows. When renovating doors and windows, we must carry out it according to our actual situation.
First, whether to transform.
For the second-hand houses and windows that have been relatively old, the owners should not continue to use the aging doors and windows in order to save decoration costs, which is not only unsafe, but also easy to cause other hidden unnecessary troubles. If it is found that the wooden doors and windows have peeling, peeling, deformation, etc., it means that there is a problem with the wood itself and must be replaced. If the doors and windows are still compact, and the paint layer on the surface is still relatively well preserved, there is nothing wrong with continuing to use them.
2. How to patch it.
If the owner of the fruit determines that there is no need to replace the doors and windows, and the original doors and windows can continue to be used, the original doors and windows may be painted. If you want to repaint doors and windows, choosing the right paint color is the key. It is difficult to cover the original heavy color with light-colored paint, so it is necessary to choose a darker color paint than the original paint surface for repainting.
If the original doors and windows have no paint color, only mixed oil, then the color of the paint can be used at will.
3. How to spray paint.
When painting windows and doors that can be used continuously, the doors and windows can be removed. Because this can get a better painting effect, and where it is found that there is uneven painting, it can be repaired twice by Hu Liangxing. However, if the painting work is carried out directly on the doors and windows, I am afraid that the effect obtained will be greatly reduced.
-
In the renovation and decoration of old houses, the decoration of doors and windows is an important link. A good design of windows and doors can improve the comfort and safety of the whole house. The following are the decoration tips for renovating the doors and windows of the old house.
Measure and determine the location of doors and windowsFirst, you need to measure the height and width of doors and windows to ensure that the size of the doors and windows can match the size of the wall and leave enough space for installation.
Choose the type of doors and windows according to the needs of the house, and different houses have different requirements for use, such as lighting, ventilation and other needs. Therefore, it is necessary to choose different door and window materials and styles according to actual needs.
Choose the material of doors and windowsThe materials of doors and windows are generally wood, aluminum alloy, plastic steel, etc. These materials have their own characteristics, such as wood doors and windows and steel and aluminum doors and windows, which can keep warm and sound insulation, and at the same time have a good decorative effect. On the other hand, plastic steel doors and windows and aluminum alloy doors and windows are more durable, lightweight and easy to maintain.
Choose the style of doors and windowsThe style of doors and windows plays a decisive role in the overall style of the house. Different styles of doors and windows can be matched with different styles, such as Chinese style, European style, etc. Therefore, it is necessary to choose a door and window style that matches the style of the whole house.
Pay attention to the installation details of doors and windowsThe installation of doors and windows must be operated in strict accordance with the specifications, including the level, verticality and stability of doors and windows. At the same time, it is also necessary to pay attention to the tightness and anti-theft performance of doors and windows.
To sum up, the decoration of doors and windows for the renovation of old houses requires professional skills and experience. Only by selecting the right materials and styles according to the actual needs and operating in strict accordance with the specifications can the doors and windows be perfectly integrated into the whole house environment, and improve the comfort of the whole house.
Aloe vera is very adaptable and vigorous, although how to change the potting soil, but in order not to affect the growth of aloe vera, the following three ways can be taken: >>>More
Precautions for renovating old houses are:
1. Concealed projects should not be ignored. It turns out that the wires of the old house are basically aluminum wires, and now the decoration must update all the lines used in air conditioning and other household appliances, and all the copper wires used in the lighting wires, which will be safer. >>>More
Hello, to give you some suggestions for your reference.
1.Personally, I don't think you have much time, or choose a decoration company reliable, because there is a contract, there are renderings, you can be more detailed when you set the contract, so that there will be a basis for problems, and there is generally a two-year warranty period after decoration. The decoration team is composed of individuals, if you can follow and stare at it every day, that's okay, otherwise it's really not recommended, cutting corners, delaying the construction period and all kinds of unexpected things may happen. >>>More
When decorating, we need to pay attention to the reasonable layout of the circuit, we need to pay attention to the environmental protection of the materials, and we need to pay attention to the construction technology of each process. >>>More
The main problem is the design of plumbing renovation and the waterproofing of the ground.