Subject 3: What lights are turned on when it rains?

When it rains lightly: Turn on the marker light.

or low beams. When it rains heavily: Turn on the fog lights.

and low beams, you can't just turn on the marker lights, because when it rains heavily, the driver's vision is seriously obstructed and he can't see the opposite side clearly, and only when the low beams are turned on, can the other party notice the coming car.

About rainy days.

5 Tips for Getting a Driver's License::

1. Don't close the windows too tightly, as fog is easy to occur in the car, and the obstruction of the line of sight affects the accuracy of judgment.

2. When it rains, turn on the wipers in time, and adjust the speed of the wipers according to the size of the rainfall, so as to keep the line of sight clear.

3. In rainy days, you should control the speed of the car, a little slower than the usual training speed, and the examiner will also worry about driving safety in rainy days.

1. Exam 2nd.

5. When passing through a place with stagnant water or under an overpass, when there is a road surface full of water, you should hang a low gear, stabilize the throttle, move forward at low speed, and pass in one go, and never stop, change gears, or turn sharply in the middle of the road.

The rainy road test focuses on testing the students' understanding of the application of lighting, and at the same time examines the students' ability to apply the role of lighting. There are two cases:

Heavy rain road test: It is recommended to turn on the fog lights and low beams, not only the marker lights, because when it rains heavily, the driver's vision is seriously obstructed and he cannot see the opposite side clearly. Therefore, the standard practice during the road test in heavy rain is to turn on the fog lights and low beams.

When it rains lightly: Turn on the marker lights or low beams.

Actually, when I took the exam that day, it was also raining. But I didn't turn on any lights. It's also passed!

In the monitoring room, subject three exams, your vehicle is a highlight. Lights will not be detected. It's not a night exam!

However, if you are worried, then I suggest you turn on a hazard warning light and you are good to go! Don't turn on the wide indicator light! Good luck getting your driver's license soon!

What lights should be turned on when driving on a rainy day in subject 3? We need to know that in rainy weather when visibility is reduced, the appropriate lights are turned on to improve our visibility and alert other vehicles to our attention. Therefore, when driving in the rain, it is essential to turn on the low beams.

In extremely bad weather conditions (e.g. fog or heavy rain), it is advisable to turn on the illumination lights. This is because in this case, the high beams will bounce back, affecting the line of sight even more. Marker lights, on the other hand, allow other vehicles to clearly see their position and length, and reduce the occurrence of rear-end collisions.

In the process of driving, if you find that the water on the road ahead is serious, you should adjust the driving lights of the vehicle to low beam in time and turn on the fog lights. This allows for better illumination of the road surface and a clear signal to yourself and other vehicles.

Finally, it is important to note that the high beams should not be turned on in any situation. Because it will reflect back, affecting one's own vision and the view of other vehicles, increasing the risk of traffic accidents.

If the weather is too bad and the weather is too bad, you need to turn on the light and fog lights, but the high beam should not be used to make the blind circle. Candidates are requested to pay more attention to their daily practice and develop correct driving habits in rainy days.

This means that the operation of your wiper is not completed, resulting in unqualified results, the general family car wiper is equipped with standard, fast and slow three gears, which can be adjusted, generally in the adjustment lever on the right side of the steering wheel. There may be some differences between models.

The manual wiper adjustment method is as follows:

Light rainfall: Don't rush to use wipers when it starts to rain lightly. Spray glass water to moisten the glass before opening it for the first time to avoid dry scraping of the glass window due to lack of moisture.

The rain gauge is big: if the rain is heavy, adjust the working frequency of the wiper in time to ensure a clear vision. If the rainfall is too heavy and the rain is too urgent, and you still can't see it clearly when you drive to the highest gear, it is recommended to find a safe place to temporarily stop and wait for the rain to lighten, and remember to turn on the fog lights and double flashes when parking on the roadside to avoid accidents.

Use rear window wipers: If your car has a rear wiper, don't forget to turn it on when it rains.

Generally, SUVs, hatchbacks, MPVs and other models are mostly equipped with rear wipers, this is because the rear windshield of the sedan has air flow through, while the hatchback or SUV does not, which leads to the fact that once there is rain, the sedan can use the air flow to blow down the water droplets, but the hatchback cannot, the water can not be blown off in time, it will be easy to stick to the dust, affect the sight of the rearview mirror, and lead to unsafe driving.

According to the 2018 Subject 3 Lighting Test Operation Regulations, motor vehicles should turn on their headlights, fog lights and hazard warning flashing lights when driving in foggy days.

The operation content of the subject 3 lighting exam is as follows:

1. Turn on the headlights when driving at night without street lights and under poor lighting conditions.

2. When following the car in the same direction at night at close range, turn on the low beams.

3. Turn on the low beam when meeting with non-motorized vehicles on narrow roads and narrow bridges at night.

4. When meeting with a motor vehicle at night, turn on the low beams.

5. When there is a breakdown on the road or a traffic accident obstructs traffic and it is difficult to move at night, change the headlamp to a marker light and a town danger warning flasher.

6. At night, through sharp bends, arch bridges, slopes, arch bridges, pedestrian crossings or intersections without traffic signal control, the high and low beams are alternately used in the middle and hidden.

When we were in the middle of a driving school test, using running lights on three foggy days was a headache. Today, in order to make it easier for the majority of candidates to pass the exam, we have sorted out the relevant tips of the three-fog day running lights, I hope it will be helpful to you!

What lights do you turn on when driving in fog?

When a motor vehicle is driving at night, there are no street lights, poor lighting or low visibility such as fog, rain, snow, dust, hail, etc., the headlights, marker lights, and rear marker lights should be turned on, but when the rear car and the front car driving in the same direction are driving for a short distance, it is not appropriate to use high beams. When a motor vehicle is driving in foggy weather, it should turn on its fog lights and hazard warning flashing lights.

Returning to the topic of virtual games, if it is only driving in foggy days, we will only turn on the fog lights and warning lights in accordance with the provisions of Article 58 above, but everyone should not forget that the premise of the whole mock test is at night, please pay attention to this.

At night, our headlights are either low or high. After the voice topic of driving in foggy days was broadcast, our car was already in a low beam state (and the position lights must be lit when the test drive model turned on the low beam). In this way, we only need to turn on the fog lights and warning lights.

Of course, if you turn the low beam into high beam, and then turn on the front and rear fog lights and warning lights, there is nothing wrong with attacking the rock in terms of laws and regulations, but I don't think it is necessary, that is to say, you have to change the high beam once and operate it again, which also means that the risk (possible mistakes) increases once, which is completely unnecessary for the candidate.

The above tips are related to what lights to turn on when driving on a foggy day. I hope that by sorting out these contents for you, we can help the majority of candidates successfully pass the test and get their driver's license!

Millions of car purchase subsidies.