How to make bubble water. How to make bubble water

Method 1: Prepare a cup, cut some fragrant emperor slices in it, then pour in hot water, add sugar, stir with chopsticks for a while, and finally cover with something.

Leave it in a warmer place overnight.

Method 2: Prepare a cup, add dish soap and water, stir well with chopsticks, then add sugar, and wait for the sugar to dissolve.

Method 3: Prepare a cup, add dish soap and white vinegar, mix well with chopsticks, and finally dilute with water.

Method 4: Use black tea water with fragrant soap and a little sugar, soak it for one night, and the bubbles blown by the water are big and not easy to break.

Method 5: Take a cup and pour boiling water, put in a bag of tea, add 1-2 tablespoons of sugar to the empty cup, pour in some detergent, pour in tea, and stir it with chopsticks.

Method 6: Glue: Washing Spirit: Hand Sanitizer (Shampoo) = 1:4:2:2 The formula effect is very good, you can also add sugar, the bubble is not easy to break, and the effect is increased with blue ink.

Method 1: Pour about 30ml of water into the water cup, add 5g of white sugar, 10ml of glue and 15ml of dish soap, and stir the mixture well to dissolve to make bubble water; Method 2: 1 cup of water, 1 3 cups of dish soap, 1/2 tablespoon of sugar; Method 3:

10ml glue + 40ml water + 20ml detergent + 20ml hand sanitizer.

Homemade bubble water recipe steps:

Method 1: Mix liquid soap and water 1:4 and add a small amount of glycerin, sugar, corn syrup or starch to keep the bubbles longer.

Shower gel, shampoo, and laundry detergent at home can be used to try to make bubble liquid, and of course, you can also buy finished bubble liquid directly on a treasure, and the effect is more guaranteed.

After mixing the bubble liquid, you can divide it into several small portions and drip in food coloring to make bubble water of different colors.

How are bubbles formed?

Bubbles are formed due to the surface tension of water. However, if the water molecules are overly bonded together, bubbles will not form easily. The soap "breaks" the surface tension of the water, reducing it to only 1 3 under normal conditions, which is the optimal tension required to blow bubbles.

The evaporation of water is very fast, when the water evaporates, the surface of the bubble breaks, the bubble disappears, therefore, some substances must be added to the bubble solution to prevent the evaporation of water. Glycerin, for example, has a hygroscopic effect, which slows down the evaporation of water.

Method 2: 1with a concentrate. Pour an appropriate amount of concentrated liquid into a bowl, add water in a ratio of 1:8, stir well, and a portion of bubble water is ready, very simple.

2.with glue and dish soap. Families with children usually have liquid glue at home. Pour 1 scoop of glue into a bowl, add 2 scoops of dish soap, 6 scoops of water, stir well, and refrigerate overnight.

3.Use sugar, body soap, and dish soap. These are all very easy to find at home.

Add 1 tablespoon of sugar, 2 tablespoons of shower gel, 6 tablespoons of dish soap to a bowl, and finally add 50ml of water and stir well. If you want something more viscous, you can put the mixture in the refrigerator and refrigerate it overnight.

The above are several ways to make bubble water, because of shower gel, dish soap, these things, different brands and types, there will be certain differences, so the bubble water made will have a certain difference, according to the actual situation, the dosage can be adjusted appropriately.

Use old wires. The bubbles will blow out, but the disadvantage is that the water evaporates quickly and needs to be blown away in time. To solve this problem, a moderate amount of glycerol can be added, which can form chemical bonds with water, which slows down the evaporation rate of water.

The bubbles blow out like this, big and durable. If you want to blow out colorful bubbles, you can add the colors you like.

The recipe for simple homemade bubble water is as follows:Prepare materials: toothpaste, water, detergent.

The first step is to pour the prepared water into the glassware, as shown in the figure below

Step 2: Then pour some toothpaste into the poured water, as shown in the picture below

Step 3: Pour in a little more detergent, as shown in the picture below

The fourth step and the final stirring can be completed, as shown in the following figure:

Here's how to make bubble water:

1. You'll need a wire about 10 cm long to make bubble water. A small glass of water. About 10 grams of laundry detergent. About 10 grams of detergent. A chopstick.

2. First, take out the wire about 10 cm long. Roll either end into a circle. The length of the remaining wire is about 5 to 6 cm. Roll about 4 to 5 cm.

3. Then, take out a small glass of water. Then pour 10 grams of laundry detergent and 10 grams of dish soap into a small glass of water. Note: When pouring, you can pour it together or one by one.

4. Then, chopsticks come in handy. Take out the chopsticks, put them in a small glass of water, add 10 grams of laundry detergent and 10 grams of dish soap, and stir for about 15 seconds.

5. Then, we will see that there will be a lot of small bubbles. We need to wait a while for those little bubbles to burst. This is to make the bubbles we blow bigger and more explosive. Note: Other tools can be used to pop bubbles.

6. Finally, take out the freshly made bubble ring. Put in sparkling water and remove. Put it in your mouth and blow gently. Then there will be bubbles.

Bubbles are formed due to the surface tension of water.

The mutual attraction between water molecules on the surface of the water is stronger than the attraction between water molecules and air. These water molecules are like being glued together. However, if the water molecules are overly bonded to each other and the jujube, bubbles will not be easy to form.

Soap "breaks" the surface tension of the water, which is exactly the optimal tension needed to blow bubbles.

The disappearance of the bubble:

When the water evaporates, the bubbles disappear, therefore, glycerin can be added to the bubbles, which forms a weaker chemical bond with the water, which slows down the evaporation of the water.

Precautions: 1. Don't play with bubble water in an open flame: If there is an open flame in the place where the child plays bubble water, it is easy to ignite, which will harm the child's health, and if it is in a sealed space, it will cause a fire.

2. Clean the bubble water immediately after playing**: It is inevitable for the child to come into contact with bubbles, but after the child comes into contact, be sure to immediately rinse the contact with a large amount of water to avoid the damage of the ingredients contained in the bubbles to the child**.

3. Don't let young children play with bubble water by themselves: Younger children must play bubble water under the supervision of their parents, once the child eats bubble water by mistake when playing by himself, and the parents don't know, what kind of situation will happen is unimaginable.

How to make your own bubble water:

Material: Dish soap.

Sugar. Liquid glue.

Steps: Pour dish soap and water into a container in a ratio of approximately 1:2.

Then pour in an appropriate amount of white sugar and liquid glue, and stir well.

Pour bubble water into a cup, then pour a bag of bubble water and an empty cup into half a cup of hot water, put in a bag of bubble cleaner, and wait for a while to produce a large number of bubbles.

Tips: You can put a little more dish soap so that the bubbles can be more dense.

Hot water can make bubble water more likely to produce a lot of bubbles, and if you want a denser bubble, you can add a little laundry detergent to the water.

You can't put too much detergent, otherwise it will affect the taste of the bubble water, and filial piety will make the bubble water very sticky.

Glad to help you, hope

Bubble Maker's Bubble Water Method:Preparation tools: dish soap, shampoo, tea bags, sugar, soap, glycerin.

1. Prepare 2 cups, 1 bag of tea, sugar, boiling water and detergent.

2. Use hot water to brew tea bags out of tea.

3. Add 1-2 tablespoons of sugar to an empty cup, pour in some detergent, and then pour in tea.

4. Stir and fuse with chopsticks, and the bubbles blown by the bubble water are large and not easy to break.

Here's how to make bubble water:

1. Take out the wire about 10 cm long. Roll any end into a circle. The length of the remaining wire is about 5 to 6 centimeters. Roll around 4 to 5 cm.

2. Take out the small glass of water. Pour another 10 grams of laundry detergent and 10 grams of dish soap into that small glass of water. Note: When pouring, you can pour it together, or you can pour it one by one.

3. Then, chopsticks come in handy. Take out the chopsticks and stir in a small glass of water with 10 grams of laundry detergent and 10 grams of dish soap poured for about 20 seconds.

4. At this time, you will see that there will be a lot of small bubbles. You need to wait for it for a while to let those little bubbles pop, so that the bubbles will be bigger and less likely to burst. Note: Bubbles can be popped with the help of other tools.

5. Take out the bubble ring you just made. Reach into the bubble water and take it out. Put it to your mouth and blow gently. And then there will be bubbles.

Precautions for bubble water:

Bubble water is one of the important toys for children, and you should pay special attention to the safety of bubble water solution when buying bubble water. There are many bubble water manufacturers on the market, but there are very few that are truly formula safe. The alkaline ingredients in the bubble water solution can corrode children**, and the fragrance has many unsafe factors.

Therefore, when parents buy bubble water, they must not be greedy for cheap, and should buy brands with good reputation.

Method 1: Pour 10ml of dish soap into the prepared empty bottle, then pour 50ml of water into the bottle according to the ratio of dish soap and water 1:5, stir it well, and it is done.

Method 2: Put 10 grams of soap crumbs in a prepared empty plastic bottle, pour 50 ml of hot water into the bottle according to the ratio of soap crumbs to hot water 1:5, stir it well, and it is done.

Method 3: Brew a cup of tea with hot water, filter out the tea leaves, retain the tea, mix it into the bottle according to the ratio of dish soap and hot tea water 1:5, and stir evenly to complete the bubble water.

Method 4: Take a cup and pour boiling water, put in a tea bag Add 1-2 tablespoons of sugar to an empty cup, pour in some detergent, pour in tea, stir it with chopsticks, okay, bubble water is ready, the bubbles blown out with this bubble water are large and not easy to break.

Method 5: Cut the soap into small slices and put them in a cup, pour in hot water to melt the soap flakes. Then add an appropriate amount of granulated sugar and a bag of tea to the cup, cover the lid and leave it overnight, and the bubble water can be completed the next day.

Method 6: 1 cup of water, 1 3 cups of dish soap, half a spoon of sugar, stir. This is a proven formula. Unlike the bubble water sold outside, it has a pungent smell and is safe.

Method 7: Glue: Water: Washing Spirit: Hand sanitizer (shampoo) is mixed in a ratio of 1:4:2:2, and stirred evenly to complete.

Method 8: Prepare dish soap, sugar, laundry detergent, and water, mix them in a ratio of 3:1:2:6, stir evenly and bottle them.