How do you make colored bubble water? How to prepare bubble water

The reason why the bubbles are colorful: When light passes through the film of the soap bubble, the top and bottom of the film are refracted, and the soap film can contain up to about 150 different layers. The messy color combinations we see are caused by unbalanced layers of film.

The last film layer reflects red light, the thinnest reflects violet light, and the center reflects colorful light. Foam bath + water + honey method 1: glue + wash + water, the ratio is 1:

2:3 Method 2: Soap, hot water, colored ink (to add color) Mix one part liquid soap, 1 part glycerin, and 6 parts water together to make your own bubble water In daily life, there are many materials that can be made into water for blowing bubbles, such as:

Chop the soap and dissolve it in water, or you can add water with dishwashing detergent or shampoo. Experiments have proved that adding three solutions of soapy water, dishwashing detergent and shampoo with a relatively high concentration can make the bubbles blown out more durable and not easy to break. Another way is to:

Add a small spoon of granulated sugar or a little tea leaves to the soapy water and leave it in a dark place overnight, and you will find that the bubbles blown by this soapy water are not only bright in color, but also less likely to burst.

Liquid soap is the key to blowing soap bubbles. Here's a recipe that works well, you can try: 2000 ml of water and 100 grams of soap powder are fully dissolved, then add 5 ml of glycerin, 2 grams of rosin powder, 20 grams of sugar, 5 8 ml of hydrosol water.

The prepared soap should be capped and left in a dark place before being used after half a day. 2. The best formula for blowing bubble solution: 2 parts detergent, 6 parts water and 1 4 parts glycerin.

3. One formula: 10% volume of liquid detergent, 5% volume of glycerol (glycerol), 85% volume of water. The mixture blows out large, stable soap bubbles.

1. First of all, we can prepare a piece of soap, then use a knife to cut it into thin slices, and then prepare an appropriate amount of water to pour it into the soap and wait for the soap to melt.

2. Then take a small amount of red or blue ink and pour it into soapy water and stir well, and then prepare an appropriate amount of washing and dry base pat essence, shampoo, and sugar into the soapy water in turn, and stir evenly, so that the colored bubble liquid is ready.

3. After the bubble liquid is ready, we can use a straw to dip it to blow bubbles, or we can cut the straw into small segments of the same length and stick them together, and finally take a straw and stick it to make a stick and dip it in bubble water.

Recipe for bubble water.

One: Ingredients: 2 cups, 1 bag of tea, sugar, boiling water, detergent Method:

1. Take a Chazi cup and pour boiling water into it, put it in a tea bag 2. Add 1-2 tablespoons of sugar to the empty cup, pour in some detergent, pour in the tea, stir with chopsticks to dry and sleepy, and the bubbles blown out of the bubble water are large and not easy to break.

2: 1. Cut the soap into small slices and put them in a cup, and rinse into the hot water to dissolve the soap flakes. 2. Add an appropriate amount of granulated sugar and a bag of tea to the cup, cover the lid and leave it overnight.

Three: Stir 1 cup of water, 1 3 cups of dish soap, and half a spoon of sugar. This is a proven formula. Unlike the bubble water sold outside, it has a pungent smell and is safe.

Four: Add a little vinegar with dish soap, as long as the concentration of dish soap is enough, the effect is also good.

Five: Use black tea water with fragrant soap and a little sugar, soak it for one night, and the bubbles blown out of this water are big and not easy to break.

Six: Glue: Water:

Dish soap: hand sanitizer (or shampoo) = 1:4:

2:2, the effect is very good, you can also add sugar, increase the effect with blue ink, according to this recipe is easy to succeed, if you use pearlescent hand sanitizer or shampoo bubble color is better, if you add a little sugar and vinegar, the bubble is not easy to break.

There are many different formulas for sparkling water, but the main types of ingredients are as follows.

Ingredient 1: Water.

The most important part of bubble water, of course, is the water. It is best to use distilled water to make bubble water, because there are no impurities in the middle of distilled water. Ordinary tap water, on the other hand, contains calcium plasma, which will bind to surfactants (soapy water) and reduce the effect.

Generally speaking, the harder the tap water, the more calcium ions it contains, the worse the effect, if your home is in an area with high water hardness, and you don't use a water softening device, it is better to go to the supermarket and buy a bottle of distilled water.

Ingredient 2: surfactant.

Surfactants such as soap and detergent are the ingredients that make water bubble, but unlike most people think, surfactants do not foam by increasing the surface tension, but instead reduce the surface tension of the water to 1 3. The reason for the bubble is based on a gibbs marangoni effect that we are too lazy to explain. Anyway, you can blow bubbles by adding it.

There are a lot of surfactants, all kinds of washing people and things in your home, the best choice is some of the purest and simplest, such as the simplest liquid soap, baby bath gel shampoo, these additives are relatively few, there are no impurities such as fragrances.

Ingredient 3: thickener.

In fact, this is the secret ingredient, most people patronize the detergent when making bubble water, but do not know that what really makes the bubbles last and become bigger is not only the appropriate proportion of detergent, but also the thickener to ensure the stability of the bubbles.

There are also many options for thickeners, the more commonly used are glycerin and syrup, the former can be bought in pharmacies and supermarkets. The latter is simpler, just go to the café and get a few packets of free syrup back.

As for the ratio of these three, you can try it yourself, it's not worth it anyway. The beauty of experimentation is to keep making mistakes, adjusting different proportions, and expecting to achieve the most perfect state.

<>1. Judge Song first cut an appropriate amount of soap into thin slices and soak it in water until it melts, and then pour a little ink, dish soap, shampoo, and sugar into the soapy water and stir evenly. Finally, you can use a straw dipped in bubble liquid to blow bubbles. There are many ways to make colored bubble water, and you can try a few more.

2. Add a small spoon of granulated sugar or a little tea to the soapy water, and put it in a dark place overnight to make colorful bubble water, the bubble color blown out by this soapy water is not only bright, but also less easy to break.

3. The best recipe for bubble water is: 2 parts detergent, 6 parts water and 1-4 parts glycerin. In this formula, glycerin is important.

The evaporation of water is very fast, when the water evaporates, the surface of the bubble is broken, and the bubble disappears, therefore, some substances must be added to the bubble solution to prevent the evaporation of water, this substance with water-collecting properties is called hygroscopic, glycerin is a hygroscopic liquid, which forms a weak chemical bond with water, thereby slowing down the evaporation rate of water.

4. The blending of soapy water will affect the effect of blowing bubbles. Generally, soapy water made with 2 parts of dishwashing concentrate and 6 parts of water can be used. To make the bubbles last, change the recipe to 2 parts dishwashing detergent plus 6 parts water and 1 to 4 parts glycerin.

If you want to make colorful bubble water, you should prepare a little Naixiang red ink or blue ink to add to the soapy water, which can make the bubble water color vivid.