How to adjust the front and rear screens of the dash cam display?

Dash camBoth full-screen and half-screen, dual-screen can be found in the "Settings" option of the dashcamHowever, not all dash cams support full screen, half screen and dual screen, therefore, the setting of the dash cam screen should be subject to the manual.

If the dash cam supports split screen, then in general, you will see three options in the "Settings" option, "Front Lens", "Rear Lens", "Dual Lens", select "Dual Lens" and confirm that the dash cam screen can be set to dual screen.

However, it should be noted that due to the different dash cams, the specific option names and setting methods for setting the dual screen may be different, so the dash cam setting dual screen needs to be determined according to the specific dash cam.

Example. Like 70 miles smart rearview mirror dash cam supports the setting of dual screens,It defaults to dual screens after booting,The left is the functional area,The right is the navigation area,Of course, you can also set the map in the navigation to full screen display。 When using navigation, the navigation task will be displayed, and if it is not used for navigation, it will enter the cruise broadcast state, which is equivalent to an electronic dog.

features. This split-screen mode has both advantages and disadvantages, the advantage is that you don't need to switch functions frequently, and you can focus more while driving. The disadvantage is that after splitting the screen, the screen of the dash cam will become smaller, like the navigation function, the navigation screen is too small in the split-screen mode, which may lead to unclear vision.

Aren't there a few buttons on the dash cam? There is a button to adjust the camera, and it is a different function to press and hold it directly or often for three seconds, so you can try it yourself.

Some are the same as mobile phones, they are all touch screens, and you can adjust the front and back display with a finger drawing.

The touch screen can be switched by setting which main page.

You can adjust it in the settings.

Hello car owner, this is very good to debug, there are four kinds of screen lenses, only front, only behind, front and back small, half of the front and rear screens, the recorder button has a left and right button, also called the page turning key, press the left button or right button to debug the desired lens. If you don't understand, you can ask me. Have a great day!

Hello take a look at the manual [If you have a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

You click on the settings to see if there is a problem with this option [there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve. 】

Since the rear camera captures the rear of the vehicle, if it is displayed directly on the screen, the image will be reversed from reality. In order for the driver to be more intuitive and convenient to judge the direction of reversing, but also to make the observation of the picture less awkwardThe reversing image is generally mirrored, so that the left and right directions on the screen correspond to the driver's real left and right sides

The left side of the screen corresponds to the left side of the driver, while the right side of the screen corresponds to the right side of the driver.

The wheel simulation trajectory in the reversing trajectory system is no exception, when we hit the direction to the left, the simulated track source Ling Hongji will deflect to the left, and when we play the direction to the right, the simulated trajectory will deflect to the right.

Driving notes Wang Heng recorder.

Reversing and warehousing tips:

1. Skillfully use reversing to simulate the travel trajectory: when we are reversing, we can predict the path of the wheels through the reversing trajectory system, which can greatly help us to control the hail of the body posture when reversing.

2. Skillfully use the reversing simulation distance marker line: In the reversing trajectory system, the simulated distance marker is generally represented by three horizontal lines with the colors of "green", "yellow" and "red". Among them, the green line to the yellow line area means that the distance is still far away, and you can rest assured that you can reverse; The yellow line to the red line area indicates that the distance is gradually approaching, so you should pay attention to it and control the reversing speed.

Finally, the red line area indicates that the maximum reversing limit has been reached, and if you continue to reverse, you are prone to collision or scratching.

Summary. Hello dear. The display size can usually be adjusted on the touchscreen by pressing the power button of the dashcam in the rearview mirror once or by sliding your finger.

The size of the display of the mirror dash cam can be adjusted according to personal preference. The specific methods are as follows:1

Press the power button: If your mirror dashcam is equipped with a power button, you can simply press the key to switch between different display sizes. Generally speaking, pressing the power button two or three times in a row can achieve this function.

2.Touch screen: If your mirror dashcam is equipped with a touch screen, you can adjust the size of the display screen by sliding your finger or rotating your hand to operate on the screen.

The specific steps are as follows: (1) Enter the settings menu: On the main interface, find the settings menu and click to enter.

2) Select Display Options: In the settings menu, you need to select the "Display" option to adjust the display size. (3) Adjust the size of the display

In the "Display" option, you can see different screen size options. Choose the size you want and save your changes.

Hello dear. Usually, the size of the display screen can be adjusted by pressing the power button of the dashcam in the rearview mirror or sliding your finger on the touch screen. The size of the display of the mirror dash cam can be adjusted according to personal preference.

The specific methods are as follows:1Press the power key:

If your mirror dashcam is equipped with a power button, you can simply press the key to switch between different display sizes. Generally speaking, pressing the power button two or three times in a row can achieve this function. 2.

Touch screen: If your mirror dashcam has a touch screen, you can adjust the size of the display screen by sliding your finger or rotating the gesture on the screen. The specific steps are as follows:

1) Enter the settings menu: On the main interface, find the settings menu and tap to enter. (2) Select Display Options:

In the settings menu, you need to select the "Display" option to adjust the size of the display. (3) Adjust the display size: In the "Display" option, you can see different screen big sock size options.

Choose the size you want and save your changes.

Attention! For some mirror dashcams, you may not be able to resize the display directly. In this case, you can try to adjust its resolution or display scale to achieve a similar effect.

Any questions, dear? 

I use Lingdu HS850B multi-function dash cam, you can't find these in the manual, please ask again.

Hello dear. According to the manual of Lingdu HS850B multi-function driving mirror dash cam, press and hold the "Mode" button on the display screen to enter the menu, then press the "down" button to select "Adjust Screen" to enter the adjustment interface, then press the "down" button to select "Display is better than the lead case", and finally press the "Left" or "Right" button to select the screen size. For specific steps, please refer to the ** and text instructions in the wheel loss manual.