0x10005bd2 directive references to 0x10005bd2 can t be read what s going on

Close some programs that don't have to be opened.

If it doesn't work, ---

Please don't steal my answer!!

Plan 1 [New P].

Note [Original]:

1 In safe mode, the effect is even better!

2.All the software to be used below should be installed or upgraded to the latest version to ensure the effectiveness of use.

3.It is not antivirus, and the following methods can be used directly. If the effect is not good, first kill it with a high-quality antivirus software (such as Kaspersky) in safe mode, and it is best to use 360 Security Guard as well, and then use the following methods.

Use 360 Security Guard's "Trojan Horse" - Full Scan". Kill and restart. If you still feel that your computer is still having problems after using a regular scan, please try the Kill mode).

You don't have to use all of the following methods, you can try them one by one. Sometimes, just the first one works.

Two. Close the browser, open the "System Repair" of the new version of 360 Security Guard, click "General Repair" to scan, and then tick the item that should be repaired, and click "Repair Now". After the repair, go back, click on "Computer Clinic", and select the corresponding item from many of the items to operate.

Then use the 360 first aid kit (360 Security Guard's "Function Encyclopedia" is available.) If the 360 security guard is not installed, a separate first aid kit can be installed. Follow the steps:

After entering, "Power Mode" will decide whether to tick according to the situation, and "Full Scan" will be checked, click "Start First Aid"; After scanning, restart; Then go to the first aid kit and click "System Repair" (you can select all of them) Scan Repair". Next, click on "DLL File Recovery", add the missing DLL files that the system detected when it detected, and then click on "Repair Now" - there are old versions). "Repair Network" and "MBR Repair" decide whether to fix or not depending on the situation.

When you're done, you should restart. 】

Three. Scan with 360 Security Guard's "Clean Plugins" to clean up malicious plugins. When you're done, you should restart.

Four. Use Windows Cleanup Assistant (from the web**). After scanning (if you sweep things out, check them all and clean them), then use Fault Repair (select all), and then right-click on the desktop to refresh. Works well in safe mode.

You can also consider using the Kingsoft First Aid Kit [Tick the "Extended Scan", after point scanning, if there are items that can be repaired, after selecting all, click "Deal with it immediately", and restart it after finishing. 】

Emphasis ---1In the repair, when there is a prompt in Kill Soft or 360, please click Allow. Restart the computer if prompted to restart during operation.

2.When the effect is not good, look at the three points in "Attention". 3.

After that, if the effect is not good, you can also consider system restoration (choose a restore point). 4.If it doesn't work, just reinstall the program.

If there is a memory problem, you can replace it if you can't wipe the memory.

Memory error. The solution about memory can't be read.

This happens occasionally, it doesn't matter, leave him alone. Click 'Cancel' and you're done.

It's dangerous to appear often, and if you don't get it right, you have to reinstall the system.

When running some programs, sometimes a memory error message appears, and then the program is closed.

0x" directive. The memory cannot be "read".

0x" directive, which cannot be written.

Generally, there are some aspects of this phenomenon, one is the hardware, that is, there is a problem with the memory, and the other is the software? Questions?

Failure Analysis Hardware:

Generally speaking, the possibility of memory problems is not large, the main aspects are: the memory module is broken, the memory quality is problematic, and there are two different brands of memory with different capacities, which is also more likely to be incompatible, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking. You can use memtest to check the memory, which can thoroughly detect the stability of the memory.

If this problem occurs when you have dual memory, and you are mixing different brands of memory modules or buying second-hand memory, you should check whether there is a problem with the memory or it is incompatible with other hardware.

Software: Let's talk about the principle briefly: there is a place in the memory called a buffer where the data is stored, and when the program puts the data in one of its positions, because there is not enough space, the overflow phenomenon will occur. Here's an example:

A bucket can only hold one pound of water, and when two pounds of water are put in, it will overflow. And the system is represented on the screen. This problem often appears on Windows 2000 and XP systems, Windows 2000 XP has very strict hardware requirements, once encountering resource deadlocks, overflows or illegal operations similar to Windows 98, the system to maintain stability, the above situation will occur.

It can also be caused by poor compatibility between hardware devices.