WinXP logs in when entering the password correctly, but the password is incorrect

1. Let's see if you have the virus?

2. If you are sure that there is no virus, you will be able to re-open it.

Reinstall. Guaranteed no problem.

Since the XP3 system network access is not turned on, the solution is:

1. On the computer of the XP system, go to the control panel.

2. In the Control Panel, go to Administrative Tools and turn on Local Security Policies.

3. In Open Local Security Settings, go to User Rights Assignment in Local Policies and turn on Access this computer from the network.

4. In the Access this computer from network attributes, click Add User or Group.

5. From the selected user or group that opens, go to "Advanced" and click "Find Now" to select the "Guest" account, confirm and accept the settings change prompt.

6. Go back to "User Rights Assignments" and open the "Deny access to this computer" attribute from your network and remove the "Guest Account" from there.

7. Place the security option in the policy: a blank password for the local account. Change to Disabled.

8. The XP system computer can be accessed with an empty password.

Recently, Liang Peijing came, a winxp system user feedback that his computer is turned on, always need an account and password to enter the system, and occasionally have to enter the administrator to confirm before entering, and the key is that the user has not set any boot password and. What's going on? Let's take a look at the reasons and solutions for WinXP to start without a password but prompt you need to enter a password!

Recommended:Featured XP systems

Cause Analysis:

This situation occurs mainly due to the user installing certain programs that cause the system to load the NetWare service.

Workaround:

1. Right-click the network neighbor - properties - local connection - properties - find the "OAKSHEN netware client service" item in the general options, and then select "Uninstall", and select "No" after the computer prompts to take effect after restarting.

2. Then go to "Control Panel" - User Accounts "- Change the way users log in or log out" - tick the checkbox of "Use Welcome Screen", click on the Apply option and restart the computer.

WinXP does not set a password, but the reason and solution for prompting you to enter a password are introduced here. If you encounter the same problem, you can successfully solve it by following the method of uninstalling the netware client server and setting up the user account!

Since the XP3 system network access is not turned on, the solution is:

1. On the computer of the XP system, go to the control panel.

2. In the Control Panel, go to Administrative Tools and turn on Local Security Policies.

3. In Open Local Security Settings, go to User Rights Assignment in Local Policies and turn on Access this computer from the network.

4. In the Access this computer from network attributes, click Add User or Group.

5. From the selected user or group that opens, go to "Advanced" and click "Find Now" to select the "Guest" account, confirm and accept the settings change prompt.

6. Go back to "User Rights Assignments" and open the "Deny access to this computer" attribute from your network and remove the "Guest Account" from there.

7. Place the security option in the policy: a blank password for the local account. Change to Disabled.

8. The XP system computer can be accessed with an empty password.

It is caused by the network access of the XP3 system is not opened, and the solution is:

1. On the computer of the XP system, enter the control panel.

2. In the Control Panel, go to Management Tools and open Local Security Policies.

3. In the Local Security Settings that opens, go to User Rights Assignment in Local Policies and turn on Access this computer from the network.

4. In the Open Access this computer properties from the network, click Add User or Group.

5. From the open Select Users or Groups, enter Advanced, and click Find Now, select the guest account, OK, and accept the setting change prompt.

6. Go back to User Rights Assignment, and open the Deny access to this computer from the network property, and delete the guest account here.

7. Replace the account in the security options policy: the local account with a blank password. Disabled instead.

8. You can use an empty password to access the computer of the XP system.

XP Sharing Settings:

Folder options View Tick Use Simple File Sharing.

1. Control Panel Management Tools Computer Management Local Users and Group Users. Enable the guest guest account.

2. Control Panel Management Tools Local Security Policy Local Policy In the user rights assignment, add the guest account to "Access this computer from the network" and delete the guest account from "Refuse to access this computer from the network".

3. Control Panel Management Tools Local Security Policy Local Policy In the security options, set "Network Access: Sharing and Security Mode for Local Accounts" to "Guest Only - Local User Authentication for Guests".

Start --- run (win7 is to search for programs and files) -- type: the IP of that computer. Enter the system account and login password of the other computer. Log in successfully, see the other party sharing files, and there are also small tools to open the sharing on the Internet.

Use a USB flash drive boot disk or CD into Windows PE, and then clear the password.

What to do if you forget the boot password—XP system.

When someone sets a password for their machine, and doesn't tell you the password as clearly as Xifeng, we have to brute-force it, haha.

Make use of the net command.

We know that the "net user" command is provided in Windows XP, which can add and modify user account information, and its syntax format is:

net user [username [password | options]] /domain]

net user [username /add [options] [/domain]

net user [username [/delete] [/domain]]

The specific meaning of each parameter has been explained in detail in the Windows XP Help, so I won't elaborate on it here. Okay, let's take the recovery of the local user's "zhangbq" password as an example to illustrate the steps to solve the problem of forgetting the login password:

1. Restart the computer, press the F8 key immediately after the boot screen appears, and select "Safe Mode with Command Line".

2. At the end of the running process, the system lists the selection menus of the system superuser "administrator" and the local user "zhangbq", and clicks "administrator" to enter the command line mode.

3. Type the command: "net user zhangbq 123456 add" to force the password of the "zhangbq" user to be changed to "123456". If you want to add a new user here (e.g

If the user name is abcdef and the password is 123456), type "net user abcdef 123456 add", and then you can run the "net localgroup administrators abcdef add" command to promote the user to the administrators group and give the user super permissions.

4. Restart the computer, select Normal Mode to run, and you can log in to the "zhangbq" user with the changed password "123456".

When you first turn on the phone, you press F8 to enter safe mode, and use safe mode to clear the password or reset the password.

Enter the security mode and change the password after logging in as an administrator.

I'm not very computer savvy either, but I have a way to fix it by reinstalling the system.