Yueji can be propagated by cuttings, what should I pay attention to when cuttings?

To cut the branches we had better choose healthy and disease-free, and it is best to choose in spring and autumn when the climate is cool and warmer, and must keep good ventilation, in such an environment the monthly survival rate of cuttings is quite high. When cuttings are in the moon season, you need to choose some strong branches, branches with full bud points, and old branches that have grown for about 1 year to take cuttings, take root and sprout, and the survival rate is relatively high. After the interception, only 2-3 sections of branches and leaves need to be kept.

<> cuttings should wait for new leaves to grow before transplanting, and the roots are easy to survive. Cuttings are half the battle, and transplanting is the other half. It is best to wait for the new long leaves to turn green before transplanting.

Shoot cuttings are carried out around June during the growing season or after the first flowering. Intercept the current year's branches with strong growth, rich tissue and slight lignification, or combine with post-flowering pruning to cut off the flowering branches of the year, cut about 10 cm long cuttings to water thoroughly, there is an automatic control system, you can set 2-3 hours to spray once, 15-20 seconds each time, generally about 28 days can be transplanted.

If the leaves of the moon season are wilted during the cutting process, we can use the fine spray of the watering can to spray the leaves, so that the leaves can absorb the water, and ensure that they do not wilt If you want to improve the survival rate of the cuttings, then you must choose a mild climate for cuttings. Ryoko suggests that cuttings should be made in the spring, when everything is recovering, and the climate should be used to promote rooting. In addition, it is easy to breed bacteria on rainy days.

The cutting method is not too complicated, generally speaking, the way of water insertion method to cut the moon season, which is more convenient, and the survival rate of cuttings with this method is relatively high. The moon season prefers acidic soils, so choose acidic soils for decaying plants. River sand can be added appropriately to increase air permeability, and cuttings do not need to add bottom fertilizer, which is easy to burn out the roots.

For hydroponic cuttings, choose 10cm-15cm long branches, cut obliquely at the bottom of the branches, and remove the leaves of the lower part of the branches, leaving only two branches at the top.

When cuttings, pay attention to the fertility of the soil can not be too fertile, if it is too fertile, it will lead to root rot, and then the cuttings should be watered every day to keep the soil moist, so that it will germinate faster.

Cuttings must ensure that the axillary buds are not germinated, if the germination is definitely not good (one of the main reasons for the black rod in the later stage) this is very important, very important, very important, the branches are semi-lignified, too old and too tender as much as possible, the tender branches lose water quickly, two or three days yellow leaves, the older branches are not vigorous, and the rooting is too slow. In addition, pay attention to see if there are red spiders on the leaves, otherwise the cuttings will be completely infected.

1. Choose the branches of the moon season, and it is best to choose the branches that have bloomed in the current year. There are also some nutrients in this branch. Shoots of about ten centimeters can be cut.

Leave two or three bud points on hand. It is best to have full bud points in the axils of the main leaf leaves and branches, which is the root of the growth of the moon season. 2. Cut the lower end of the branch into a bevel.

Keep the leaves for a month, and it is best to dip the branches in a little rooting agent. 3. The method of cuttings can be used vermiculite cuttings, river sand cuttings, and nutrient soil can be used to cut by themselves. Of course, you can also use water for cuttings.

There are various ways to cut cuttings.

After cuttings, pay attention to avoid direct sunlight, cover the curtain in time on sunny days, and use a small sprayer to spray the leaves when they are dry to prevent the leaves from drying and falling off. After the cuttings are rooted, remove the cover film, give sufficient light, and spray 500 times the liquid regularly to prevent the occurrence of powdery mildew.

When cuttings, you should pay attention to the time, and you should also pay attention to the ways and methods, and at the same time do not water too much, otherwise the roots will rot.

When taking cuttings of seasonal flowers, you need to pay attention to these points, and you don't have to worry about not living the cuttings after learning it.

Methods of propagation by cuttings of moon flowers: new shoot cuttings, shoot cuttings and hard branch cuttings.

Cuttings of new shoots: The cutting time of new shoots in the month is generally selected in spring, when the new shoots have just grown and have relatively strong vitality; Twig cuttings: Twig cuttings should be selected from the robust branches of the current year, and there should be no pests and diseases; Hard branch cuttings:

The cutting time of hard branches is chosen at the turn of winter and spring, when the temperature is still relatively cold.

Moonflowers like a sunny growth environment, need to be planted in a sunny position, should ensure no less than 5 hours of light every day; If the moon flowers are exposed to insufficient light, they will cause weak branches and leaves, long plants, poor flowering, and poor flower color. Although the moon flowers like light, pay attention to shade and take sunscreen measures in strong sunlight in summer.

The common way of reproduction is cuttings, there is no time limit for general cuttings, as long as the temperature and humidity control rooting is no problem, it is a technique in the winter planting season, it is recommended to use cuttings, or the wall cuttings, it is easier to ensure that the roots are mao, and the winter cuttings should be treated first. 1. Bud cuttings: when selecting the buds of the moon season to cuttings, you can leave a leak Zheng piece, in the winter cuttings to build a bag to keep warm and moisturize, the common propagation method of the month is the cuttings, there is no time limit for the general cuttings in the month season, as long as the temperature and humidity control rooting is no problem, it is a technique in the winter month insertion season, it is recommended to use plain cuttings, or hit the wall insertion, it is easier to ensure that the roots are growing, and the winter cuttings should be treated with the branches first.

1. Bud cutting

When choosing the buds of the moon season to cuttings, you can leave a piece, in the winter cuttings to build a bag to keep warm and moisturize, and it is recommended to use the method of hitting the wall to cuttings, pay attention to make a wind hole to breathe, the general garden cuttings are easy to fail, leaving leaves without leaving a mouth are easy to fail.

2. Blind insertion

The so-called blind branches are branches that do not bloom in spring, and there are many reasons for the appearance in spring, mainly related to the environment and nutrition.

For blind branch cuttings, just leave 2 complete mouth pieces, and it is recommended to remove half of the leaves, so that the water dissipation is slow, and the degree of wilting of the branches can be observed to adjust the control, but also pay attention to the bagging treatment of thermal insulation and moisturizing samples. Manuscript Search.

3. Shoot cuttings

The general shoots are difficult to take root and transplant difficult, so it is recommended to use the method of hitting the wall 20 to cut the key Zen cuttings, but not too tender semi-lignified on the line, too tender and easy to fail, the same to ensure temperature and humidity.

4. Branches and old piles

If it is a thick branch and an old pile, you can cut it directly without leaving a piece, bury it directly in the sand, and bury it directly in the sand, and the water will not evaporate quickly after the cutting, and the survival rate can be greatly improved.

After the Newman sisters bloomed, they held the test cover to try out the principle of not wasting it, cut the branches under the moon flowers, and did not forget to dig the well when they drank water. Thanks to the experience of hitting the wall TX!

6 21 Cut the flowering Newman sisters at the bottom three leaves.

In line with the principle of not wasting, each leaf begins to be cut with a branch.

Because the first time I used this method to insert the pole, I didn't think that I would succeed, so the process was not photographed, and the following steps were taken when the second pole was inserted:

1. Prune the branches under the flowers, leaving a small branch for each leaf.

2. Find a plastic cup to observe whether it has taken root, cut it or burn a hole at the bottom. Filled with pure vermiculite, I use fine vermiculite.

3. Plug in the branches and water thoroughly.

4. Put a tray at the bottom to fill some water.

5. Put it in a place with good light, when the temperature is not high, it doesn't matter if the sun is not exposed to it, when the temperature is very high, it is better to put it in a place where the sun is not exposed to insurance.

I put it outside the window facing south, and in the afternoon, I can occasionally get some sun, I don't care, as long as there is water in the tray all the time, it will be fine. 7 10, I can already see that the roots are growing very well.

7 14 And when he found that the root had come out of the little hole, he began to prepare for transplantation, fearing that it would hurt the root.

6. Fill the basin with water, soak the whole cup in the basin, the vermiculite liquid is scattered, it is easy to move the moon out without hurting the root system, three branches, only this branch has a particularly good root system, the other two have healing tissue, and there are also some white roots that begin to grow, continue step 2 Insert the two branches that are slower in root growth back into the pure vermiculite cup and continue to take root.

7. Transplant, water thoroughly, put it in a cool and ventilated place slowly, and slowly move it to a sunny place.

The pole insertion must be with leaves, and the success rate will be higher.

2. I didn't sterilize the pure vermiculite pole before inserting it, and the branches didn't soak in rooting powder.

After the summary, please correct

It is best to choose to use humus to configure sand to cuttings, we need to give enough light to the early cuttings of jujubes, and after a period of successful cuttings in the moon season, we can properly apply a tease to erect some rooting powder rocks.

Cut the thick branches and cuttings, the weak branches take root slowly and are not easy to live. The survival rate of cuttings with young shoots is the highest, and the survival rate of cuttings is the highest after flowering, and the survival rate of cuttings under the cuttings is the highest after flowering. Put it in the humidor for a week in the sun, take off the lid to bask in the sun after a week, pay attention to add water, add water once a few days, and don't move the seedlings.

The gas temperature is low, the temperature is high, and the humidor is high, do not use the humidor, and put it in the tray to bask in the sun directly. Be careful not to move it well, add water in a tray, not in a cup. The water in the tray is 1-2 cm high.

Be sure to bask in the sun. After the cuttings take root, they should wait for the new leaves to grow before transplanting, and the leaves photosynthesize nutrients to the roots, and the roots are easy to survive. If there are no leaves or the roots are too short, it is difficult to transplant them.

You can first use a small nutrient bowl to raise seedlings, medium with peat, vermiculite, perlite, culture soil can do, and then pot after raising roots. Transplanting timing is important. Cuttings are half the battle, and transplanting is the other half.

It is best to wait for the new long leaves to turn green before transplanting.

On the branches of the moon season, He Sou only left a few leaves at the top, and pruned off all the branches and leaves that were redundant. Soak the pruned shoots in the appropriate concentration of auxin and take them out after two minutes.