What happens if the stone doesn t shine soon after it s done

What products do you use, have you ever used a zip product? The effect comes out well, while the effect that comes out is bright.

Summary. Marble is a porous material, so it is easy to stain and become dull, use less water when cleaning, regularly wipe it with a slightly damp cloth with a mild detergent, and then wipe it dry and polish with a clean, soft cloth. Carefully wipe with a liquid scrub, you can use lemon juice or vinegar to clean the stain, but it is better not to leave the lemon on it for more than 1 2 minutes, repeat if necessary, then wash and dry.

For minor abrasions, special marble cleaners and conditioners can be used.

Hello, marble is not shiny, you can buy paraffin wax to beat it. You can also use finer polishing pieces to grind and polish. It can also be treated with recrystallization.

The basic principle of stone crystallization is to combine some special chemical materials with the heat generated by mechanical friction and the structure of the marble surface to produce a new hard crystalline layer. It can also improve the wear resistance of the marble surface, making its luster more durable.

Hello, I have seen your question and am sorting out the answer, please wait for a while Marble is porous which dismantling material is such as, so it is easy to stain and become dull, the water used in cleaning should be less, and it should be wiped regularly with a slightly damp cloth with mild detergent, and then wiped dry and polished with a clean soft cloth. Carefully wipe with a liquid scrub, you can use lemon juice or vinegar to clean the stain, but it is better not to leave the lemon on it for more than 1 2 minutes, repeat if necessary, then wash and dry. For minor abrasions, special marble cleaners and conditioners can be used.

2 Hello, the marble is not shiny, you can buy paraffin wax to play it. You can also use finer polishing pieces to grind and polish. It can also be treated with recrystallization.

The basic principle of stone crystallization is to combine some special chemical materials with the heat generated by mechanical friction and the structure of the marble surface to produce a new hard crystalline layer. It can also improve the wear resistance of the marble surface, making its luster more durable.

After the stone crystallize, when you see that the surface of the stone is black and not bright, or the brightness is not ideal, you can refer to the following phenomena to analyze the reasons:

1) The surface of the stone is like coated with viscous and opaque oil, and there is no texture. Outcome. It is easy to lose its gloss in a short period of time. Analysis:

1. Crystallized powder (polishing powder) does not form an effective reflective layer, and the crystallized powder may not be suitable for stone varieties, and may also have a short glaze sealing time;

2. The grinding time of the crystal hardener is short, and there is no hardened crystalline layer on the surface of the stone;

3. The amount of crystalline hard agent in the construction operation process is not appropriate, and the principle of "starting with a large amount and gradually decreasing" should be referred to, and the reaction can only occur when the stone surface is heated, and the grinding time must be sufficient;

4. The stone is damp, the surface moisture content is large, the temperature is too low in the crystal hardening process, and there is no crystal hard layer, which is equal to direct brushing. You can wait for the stone to dry after crystallization construction, when the construction period is not allowed, you can take a clean mat with a high wool content, use the crystal surface machine, a cleaning pad to heat and dry the stone, and then crystal hard.

2) The stone is not crystal clear, and the surface looks like the stone is not moist, dry and white, and the black stone is especially obvious. Analysis:

1. The grinding process is not enough, when the surface of the stone has a matte effect (water throwing sheet 400), you can crystallize the glazing, the stone fine grinding time is short, or the skipping number is omitted, the surface layer can not form a reflective dense layer, and the later crystallization varnishing will not be able to achieve the desired effect.

2. Black stone, black sand represented by granite, often see the surrounding whitish when polished to the corners, and sometimes you can see a trace of whitishness; This is because the center of gravity of the grinding equipment is generally located in the center of the grinding disc, when the grinding walks to the corner, the speed should be reduced, and the man-hours are increased by 3 times relative to the grinding of the intermediate stone ground.

3. Stone equipment has a direct relationship with the effect after construction, and the efficiency and effect will be significantly improved when choosing large-scale and advanced grinding equipment; But this is not the absolute factor that determines the quality, the pressure generated by the weight of the machine, the different speed of the machine grinding, for different stones, have corresponding adjustments, in order to achieve the desired effect.