After the Lenovo computer is put into the CD, where is the content, and how to operate

The detailed steps to reinstall the system disc for the computer are as follows:

1. Press and hold the F12 key on the keyboard before turning on the computer, and the "Please Select Boot Device (or Startup Device Menu)" menu will appear. At this time, put the "System CD" into the CD-ROM drive, then select "CD *** (related CD-ROM options)", and press the "Enter" key twice;

2. After the disc is booted, the screen shows boot from cd: press enter twice before booting from the disc, otherwise boot from the hard disk;

3. Initialization installation is waiting;

4. When the language and other preference setting interface appears (as shown in the figure below), you can set the "language to be installed", "time and currency format", and "keyboard and input method" according to the usage situation. In general, you can use the default settings, and click the "Next" button directly;

5. Click "Next" on the interface of selecting the operating system to be installed;

6. The license agreement interface appears, check the "I accept the license terms" in the red box, and then click the "Next" button to continue;

7. The interface of selecting the system installation partition as shown in the figure below appears, Lenovo computers generally have two hard disk partitions (C disk and D disk) from the factory, it is recommended to format only C disk (disk 0 partition 1) to reinstall the system;

8. As shown in the figure above, click "Drive Options (Advanced)" in the red box, switch to the interface as shown in the figure below, select "Disk 0 Partition 1" with the mouse, and then click the "Format" button below;

9. The system pops up the data loss warning dialog box as shown in the figure below, click the "OK" button to continue;

10. The following figure shows the state after formatting the partition, click the "Next" button to continue the installation of the system;

11. The installer starts to copy files and installers to the selected partition, there will be several reboots in the middle, no need to do anything, please wait patiently for 10-20 minutes;

12. When the interface as shown in the figure below appears, you can enter a user name (Chinese and English are acceptable) as the administrator account of the system (here as an example, enter lenovo), and you can also select your favorite **as the account**. After entering the selection, click "Next" to continue;

13. Enter a computer name in this interface, you can also use the default one, and you can choose a desktop background you like. Click the "Next" button when the selection is complete;

14. The interface as shown in the figure below appears, adjust the correct time zone, date and time, and then click "Next";

15. All the settings have been completed, click the "Start" button, and the system will do the final debugging and optimization.

The first thing to look at is what you're going to do? In my estimation, you shouldn't be installing a driver, because you don't know how to use the disc, let alone install the system, the content of the disc is the driver of all the hardware of the computer, and it is only used after the new system is installed, because the driver that comes with the system can only support hardware running, not necessarily the most matching program. Don't be too curious, you must have installed the most matching driver in your system, if you reinstall, first uninstall, then, it is possible that the driver is not installed, and it will cause the previous driver to not run.

Click on My Computer--*** Driver.

Here's how to turn on the optical drive on your Lenovo laptop:

1. Open the Windows Explorer window page and right-click on the CD drive displayed on the page.

2. In the right-click menu, select the "Pop-up" menu item to pop up the optical drive hardware device;

3. You can also directly press the physical button on the optical drive device, or you can pop up the optical drive device.

Here are the Lenovo H3050 operation steps as follows:

1. After the computer is turned on, click My Computer (Computer) on the desktop. If I don't have my computer on the desktop, I can click the Start Menu - Computer - *** Drive. The same can be opened.

2. After clicking on, click on the removable storage device *** drive (e).

3. After clicking, there is a "pop-up" option in the upper left corner of the page. Once you click on it, the optical drive will pop up.

4. After ejecting, place the disc longitudinally on the left side of the main unit. Be sure to check if it has been placed correctly, the disc is not properly placed, and it is very troublesome to fall into the chassis.

5. After putting the disc away, push the disc drive in by hand.

Generally, on laptops, the optical drives where the disc is placed are on the left and right sides of the computer. There are two ways to turn on the optical drive:

1. There is generally a button on the optical drive, press the button, and the optical drive can be ejected (this method is only applicable to computers with buttons);

2. Open the optical drive through the computer.

1. Find the "Computer" icon on the computer desktop, and double-click the left mouse button to enter it;

2. In the pop-up window, you can see "Device with removable storage", right-click the mouse;

3. In the pop-up menu, find the "Pop-up" option, and left-click with the mouse;

4. Pop up the optical drive, and you can see the place where the disc can be placed on the optical drive;

5. Find the disc you want to use, face down, use the round hole in the middle of the disc to get stuck in the middle of the disc drive, gently press the disc, and the disc will be placed immediately. From the right side of the optical drive, gently push the optical drive into the computer with your hand;

6. When the optical drive is pushed into the computer, the sound of the optical drive rotating on the computer can be heard, which means that the computer is recognizing the content of the disc. Wait for a while, you can go back to step 2, double-click "Device with removable storage" with left mouse button, and find the file you want to **.

The specific steps to pop up the Lenovo computer disc are as follows:

1. First of all, the optical drive is usually designed on both sides or the front of the computer, look at the computer, you can see the position of the CD optical drive on the side of the computer in the figure below, and there are small white buttons in the middle of the cover, this button is used to open the CD optical drive, as shown in the following figure, and then enter the next step.

2. Secondly, after completing the above steps, turn on the computer first, and then gently press the white button with your finger to open the optical drive, as shown in the figure below, and then enter the next step.

3. Then, after completing the above steps, gently pull out the drive with your hands, pull the drive to the entire disc, and now you can place the disc as shown in the figure below, and then move on to the next step.

4. Finally, after completing the above steps, gently push the disc drive back until you hear a click, then the computer will read the disc, and the white dot in the middle of the disc will flash, which means that the computer is reading the disc data. As shown in the image below, the problem is solved.