Can the dry ice cleaning machine remove rust and how to clean the ice machine

The dry ice cleaning machine can remove floating rust, but it cannot achieve the effect of polishing and grinding, because the special thing about dry ice cleaning is non-destructive cleaning and will not damage the substrate of the substance.

Dry ice cleaning machine is a kind of cleaning machine, and the dry ice cleaning method has been rapidly developed around the world. The cleaning system sprays the dry ice particles of the dry ice cleaning machine to the working surface to be cleaned through high-pressure air, and uses the physical reflection of the temperature difference to make different substances detach at different shrinkage speeds.

When choosing a dry ice cleaning machine, it is more secure to choose a big brand, and Kujie Cold Jet is a good choice. Headquartered in Ohio, USA, Founded in 1986, Cold Jet manufactures and sells dry ice cleaning equipment and dry ice production equipment worldwide, and currently has 3 manufacturing facilities in the United States and Europe. Cold Jet has 11 branches around the world, located in the United States, Germany, Denmark, Belgium, Japan, China, as well as a global network of leading merchants.

Dry ice cleaning technology removes rust and is useful when encountering very thin pieces of iron or duplicate structures. If the site cannot be wet (water is inconvenient) or cause secondary pollution, dry ice cleaning to remove rust is the best choice. Sandblasting can cause local deformation or secondary pollution.

Dry ice cleaning technology is an option for high standards.

The effect is not ideal, the best is to use a sandblasting machine to remove rust, Italy ibix imported small jetting machine, cheaper than dry ice cleaning machine.

1. Turn off the ice machine first.

power supply. <>

2. Secondly, find out the spare [neutral detergent].

3. Wipe the body of the ice maker with a clean [rag] dipped in some [neutral lotion liquid].

4. Turn on the ice machine, use a burlap to clean up all the ice and some water in the ice machine, and remove the front plate.

5. Pour an appropriate amount of [water] into the water tank.

6. Pour the ice machine [special cleaning liquid] into it.

7. Press the switch to run for 10 to 20 minutes.

8. Use a brush to clean the evaporator of the ice machine.

Grind on ice and wipe clean with a rag.

9. Select "Ice Making Mode".

10. After the ice making is completed, blanch the ice with hot water, and the ice machine will be washed.

1.After using the ice maker, you need to clean the ice cubes from the refrigerator. When cleaning the ice machine, turn off the power supply, do not use a water hose directly to the fuselage to rinse, use clean water, add an appropriate amount of neutral detergent (it is strictly forbidden to use acidic, alkaline and other corrosive solvents) to wipe the machine coaming and liner, and then wipe it clean with a soft cloth.

2.The ice machine must unscrew the water inlet hose head for two months, clean the water inlet valve filter, and avoid the sand and mud impurities in the water from blocking the water inlet, which will cause the water inlet to become smaller, resulting in no ice making.

3.Clean the dust on the surface of the condenser every two months, and poor condensation and heat dissipation will cause damage to compressor components. When cleaning, use a vacuum cleaner, small brush, etc. to clean the oil and dust on the condensate surface, and do not use sharp metal tools to clean to avoid damage to the condenser.

4.The ice maker's water pipes, sinks, refrigerators and protective film should be cleaned every two months. When not in use, it should be cleaned, and the ice mold and the moisture in the box should be dried by using a hair dryer, and placed in a non-corrosive gas, ventilated and dry place, and avoid open storage.

The water inlet of the ice machine can be connected to the oxygen water sterilizer, which is specially for pipeline disinfection, so that the ice machine will not be dirty.

Of course, it is to stand for a certain period of time after the power is off! With a special cleaning agent! It is best to disinfect.

Method 1: Rub it with cotton dipped in a little engine oil to remove rust.

Method 2: 1. Wipe the stain with 15% acetic acid solution, or soak the stained part in the solution, and rinse it with water after a few hours;

2. Moisten the stained area with 10% citric acid solution, then soak it in concentrated salt water, wash and rinse it the next day;

3. You can scrub and remove 2% oxalic acid solution in warm water, and then wash the clothes thoroughly with clean water to avoid oxalic acid corroding the clothing.

Method 3: Soak the clothes first, grind them into powder with 3-4 vitamin C tablets, sprinkle them on the rusty area and soak them for 60 minutes, and then wash them.

Method Banquet Hand Four:

First, soak the rusty area with boiling water, smear it with sour milk, and apply soap to wash it clean.

The following operations need to be performed before the dry ice cleaning machine is used:1.Prepare the dry ice pellets and place them in the machine storage.

2.Connect the air supply and ensure that the pressure and flow of the air supply meet the requirements of the machine.

3.Adjust the gas flow rate of the spray gun and adjust the amount of dry ice pellets shot as needed.

During use, you need to pay attention to the following:1.Keep away from the machine spout to avoid accidental injury to the ejected object.

2.Avoid pointing the machine spout at wires and other fragile objects.

3.Stick to the use of personal protective equipment such as gloves, goggles, and masks.

4.Turn on the machine before spraying and allow it to warm up for a while.

In terms of machine maintenance, the following work needs to be carried out on a regular basis:

1.Clean machine nozzles and reservoirs so they don't clog or accumulate ice slag.

2.Check whether the air source pipeline of the machine is normal and ensure that it is sealed and clean.

3.Make sure the moving parts of the machine are in good working order and not overly worn.

Dry ice blasting deburring is actually a batch processing technology, and it is also commonplace nowadays; Dry ice deburring is a cost-effective way for manufacturers to remove burrs without damaging the surface quality of the product, and also to ensure product dimensional tolerances.

The product is easy to leave some raised small pieces of edge material in the production and molding process, this extra material - is what we call burrs, burrs are not only generated in CNC machining, but also in our injection molding die-casting products.

Dry ice cleaning technology, collectively known as cold blasting, relies on high-pressure air flow to accelerate the spraying of dry ice particles through the dry ice cleaning machine to the surface of the product to be cleaned. This process of change is called the momentum change-sublimation process. In order to achieve the dirt and impurities on the surface of the object are quickly frozen, embrittle, condensed, and fall down with the impact of the air flow; In this way, the deburring process of using dry ice will not cause harm to the product, especially the plastic material - the middle frame of the mobile phone deburring.

The advantages of dry ice cleaning are: for mold cleaning, it reduces the downtime of disassembly and can be cleaned; For product deburring, it reduces the defective product, provides production efficiency, and reduces labor costs; For the cleaning method, dry ice cleaning is a non-toxic, non-destructive and non-polluting cleaning method.

Therefore, the dry ice deburring technology for the product burr, the effect is still visible, not only in the removal process does not damage the product, the cleaning efficiency is high, but also can quickly remove the excess burr of the material, without affecting the appearance of the product.

1. How to use: Take out the dry ice from the dry ice incubator and put it into the ice cutting room, close the door, adjust the working air pressure, step on the foot switch, hold the handle tightly, and clean the object that needs to be cleaned.

2. To maintain the dry ice cleaning machine, first of all, a stable power supply is needed when using the dry ice machine. If the power supply used by the dry ice cleaning machine is unstable, it will consume excess power and affect the life of the dry ice machine.

3. Secondly, use a soft cotton cloth to clean the dust of the dry ice machine regularly, and at the same time check the internal parts of the dry ice machine, and replace the parts in time when there is any abnormality.