Is it normal for water to enter the water meter? Does the water meter have an impact if it is floode

Normal. Under normal circumstances, it is normal for water meters to enter the water meter.

Wet Water Meter:Today, more than 90% of tap water users use wet water meters, which are water meter counters.

For a water meter immersed in water, the glass can withstand the water pressure, and the transmission of the sensor and the counter is geared. The reason for the water ingress of the water meter may be related to the water pressure. Since the counter itself is immersed in water, the counter is not damaged when the meter is flooded.

In this case, first of all, the water meter can be divided into dry, wet, and liquid-sealed according to whether the meter is immersed in water. Ordinary household water meters are basically wet, that is, the meter is soaked in water, this kind of water meter has low cost, easy maintenance, and is widely used, and it is normal for this water meter to have water in it.

The sweating of the pipe is caused by the temperature difference between the water temperature and the room temperature in the pipe, the water temperature in the pipe is low, the indoor temperature is high, as we all know, the water vapor will condense into small water droplets when it is cold, and the indoor air contains water vapor.

Of course, the water passes through the water meter, there is a small gear in the water meter that is driven by water, the digital water meter looks at the number, the red one does not look, the turntable starts from *1 and pushes upward, over 1 less than 2 to recognize 1, and so on, it is difficult to distinguish, such as *10 on the number 8, it is necessary to see if there is a single digit over 0, over 0 to recognize 80, not to recognize 79

The water meter is a measuring instrument for measuring the flow of water in the world, it works in the state of water, and it is very normal and inevitable to be immersed in water.

The water meter is not afraid of water, and if you soak in water all day, it's fine.

Normal, so I don't wear it all the time.

There is a pinion inside the water meter, which is driven by water, and it will not turn if it is not watered, but my water meter is Xin'an, and when the water is not used, the pinion turns and reverses, what is the reason?

Whether or not the water inlet into the water meter has an impact on the water meter mainly depends on the type of water meter. A water meter is a meter that measures the amount of water flow, and most of them are the cumulative flow measurement of water. According to whether the water meter counter is immersed in water, Yupei is divided into wet water meter, dry water meter, and liquid seal water meter.

The dry water meter is the only water meter whose counter is not immersed in the water, and the water inlet of the dry water meter will affect the reading of the water meter counter.

The sensor of the dry water meter is isolated from the chamber of the counter in the structure, and the table glass does not bear the water pressure, and the transmission of the sensor and the counter is generally driven by magnetic steel.

The wet water meter is a water meter whose counter is immersed in water, the meter glass can withstand the water pressure, the sensor and the counter are geared linkage, and the factor affecting the clarity of the water meter reading is the quality of the water quality. Most of the structural properties of liquid sealed water meters are the same as those of wet water meters.

If the water meter is broken, there will generally be no measurement, the pointer does not go, the high-speed friend notice rotates, the water meter goes slowly, leakage and other abnormal situations, the water meter within the warranty period can be immediately replaced by the property department or the local water supply department for free, and the water meter outside the warranty period needs to be repaired by yourself.

If the water meter is broken, there will generally be abnormal situations such as unmeterable, pointer not moving, high-speed rotation, slow water meter, and leakage. It is best to find out the cause of the water meter abnormality immediately and deal with it accordingly to avoid affecting the normal water supply or causing economic losses.

If there is natural damage during the shelf life, you can generally contact the property department or the local tap water ** part for free replacement, if it exceeds the shelf life, you need to find someone to repair it.

At present, most families are equipped with smart water meters, and the battery needs to be replaced regularly when using this water meter, otherwise the water meter will not work when the battery is exhausted. After replacing the battery, it is necessary to change the moisture-proof cover and tighten the screws to avoid reducing the service life of the battery.

1. Is it normal to have water in the water meter?

It is normal to have water in the water meter. Ninety percent of households now basically use wet water meters, which are water meters with meter counters immersed in water, and the reason for the water ingress of the meter may be related to the water pressure.

Second, how to choose a water meter.

1. Select the water meter specification.

Because the stability and practicability of the water meter under ordinary flow are very good, it is more suitable for the design requirements. If the water pipe is considered to reserve a margin for future water capacity, you may wish to choose a smaller diameter size when choosing. If the pipe with a diameter of 200 is not enough due to the flow rate, you can choose a water meter with a diameter of 150, and then replace the water meter of the same caliber when the flow rate increases to the normal flow rate of the pipeline of 200 in the future.

When choosing a water meter, large factory users may wish to choose a water meter with a larger diameter, or use the method of merging multiple water meters with a smaller diameter, so that they can also repair or replace some water meters with problems without affecting normal use.

2. Select the water meter indication type.

It is usually in the form of a word wheel, which is easy to read and easy to read. However, some users feel that it is more convenient to install a pointer type where it is not possible to read the meter at close range, because this type can determine the reading according to the geometric angle of the pointer, and it is not necessary to see the value on the cylinder grid. Today, liquid-sealed counters are sought after because they overcome the common drawbacks of counters that are often blocked by rust in water.

3. Consider the convenience of installation and maintenance.

It is inconvenient to install and maintain, and the large-diameter water meter is a key point to consider. The length of the water meter device and the simplicity of the connection method of the water meter are also aspects that must be considered, although the requirements in this regard have been limited in the national standard GB for water meters.

Question 1: Will the water meter break? In general, sun exposure alone will not cause anomalies in meter readings. The strong smell of plastic is most likely from the water pipes!

Question 2: If the water meter is broken, will it affect the water pressure? No, the function of the household water meter only calculates the flow rate of water, and does not affect the on/off of water, so it naturally does not affect the water pressure!

Question 3: Will the water stop when the ordinary water meter is broken No, the role of the water meter is only to measure the amount of water used, as long as the valve next to the water meter is not closed, there is water.

Question 4: Will the water stop if the water meter is broken No, the water meter will not go, save money.

Question 5: Will there be no water if the water meter is broken? Probably not, he should have turned off the main switch, otherwise he could still give you free water.

Question 6: Will the water stop when the ordinary water meter is broken It depends on how you are broken.

If it's blocked, it'll stop.

If you don't transfer, you'll earn it.

Hurry up and boil water Question 7: Will there be no water if the water meter is broken? If the water meter is old and broken, it will be directly replaced with a new watch, and it will not be repaired and replaced by the old one, at most, the new watch will be paid for you.

Question 8: Can the water still come out if the water meter is broken LZ Hello, I am happy to answer for you The plug-in card water meter plug-in card has a response but the water does not come out, it may be that there is a problem with the valve. Generally, like the water meter, the property is responsible for the skin, and the maintenance is generally a batch of maintenance, it is impossible to return to the factory to repair a piece, the cost is too large, and there is not much profit for them.

There is another point, if you maintain it personally, the property may not admit it, and you can't argue with what to say Generally speaking, the water meter with a card ** at 400 is very good, and what is the problem. [If it is helpful to you, please select the satisfactory answer below me Thank you].

Question 9: If the water meter is broken, will it turn on its own No, hehe, and it will not affect your numbers, so hurry up and repair it, otherwise it will be fined after a long time!

Question 10: Will the tap water meter break after being soaked in water? The tap water meter is determined by measuring the flow velocity of the water flowing through the water meter, and only when the water flow is formed, can the impeller be driven to rotate, and the gear on the impeller drives the gear set to carry out water metering.

Because it is measured by the rotation of the gear, it will not be damaged by blisters.