What s the best way to get into the water on your phone?

If you are using a Huawei phone, we recommend that you do the following:

1. Please try to place your phone in a dry and ventilated place and use a paper towel to blot the water stains on the surface of your phone.

2. If the phone is turned on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3. Please take out the SIM card and microSD card.

4. Take your phone to a Huawei customer service center as soon as possible to avoid unnecessary losses.

Precautions: 1. Do not move or shake the mobile phone frequently after entering the water, so as to avoid the spread of moisture inside the mobile phone.

2. Do not bake with a hair dryer or stove after entering the water, so as to avoid the liquid being blown into the inside of the mobile phone and damaging the mobile phone at high temperature.

3. Some mobile phones can be turned on and used normally after simple treatment, but the mobile phone is composed of precision electronic components, and there is a hidden risk after water ingress, so it is recommended not to try to turn it on.

4. During the repair process of the mobile phone, the data may be lost.

You can try it with a hair dryer.

1. Shut down in time.

Second, you can quickly wipe it with a clean towel, and then use a hair dryer to dry the inside, pay attention to the distance between the hair dryer tuyere and the mobile phone, so that the wind temperature blowing on the mobile phone is close to normal temperature, and the time for the hair dryer to blow the mobile phone should not be too long, 20 minutes is basically fine.

Sorry to hear this news if you are using a Huawei phone.

To reduce your losses, we recommend that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for maintenance.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Mobile phones are made of precision electronic components.

There is a potential risk after water ingress, so please keep your phone turned off.

3.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

4.If there is no backup data.

There may be a risk of data loss when repairing. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Repair spare parts** inquiry.

Make an appointment for service. Boarding service.

Vivo mobile phone liquid inlet treatment method:

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing, customer service center address: enter vivo official website vivo**app--my-service outlets or vivo official website web version--bottom of the slide--service support--service outlets query--select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

If you use an OPPO phone after water or liquid ingress, in order to avoid further damage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If it is not cleaned after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and repair as soon as possible.

Notes:1Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake your phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (after the moisture inside the mobile phone is heated into water vapor by a hair dryer, etc., it may penetrate into other components of the screen, which will cause the mobile phone to get wet and damage the electronic components).

The first trick: "paper towel + cotton swab" water absorption method.

After the mobile phone enters the water, the most direct and effective way is to use the paper towel and cotton swab to absorb water, the paper towel is responsible for a large area, and the cotton swab is responsible for a small area. Start by wrapping your phone in a paper towel and quickly blot the water on the surface. After that, use a thin cotton swab to clean the earphone hole, charging wiring hole and other parts to avoid external moisture penetration.

The second trick: rice water absorption method.

Rice may seem common and inconspicuous, but it also has a powerful dehumidification and water absorption function! Stuff the watered mobile phone into a bag with rice, seal and store it for more than 24 hours, as long as the mobile phone is not in water for a long time, it can be restored to use and turned on normally.

The third trick: desiccant water absorption method.

Usually, you can prepare some desiccant or drying box in case of emergency. There will be some small packets of desiccant in some of the goods I usually buy, which can be used, collect these small packets of desiccant, and then seal the soaked mobile phone with them, the effect is very good

If the mobile phone is flooded, the first time is to wipe the water on the surface of the mobile phone, and then put it in the ventilation to dry, and then check whether the mobile phone can be used normally after a few hours!

1. Don't force it on, it is likely to cause a short circuit in the phone;

2. Don't shake the phone hard;

3. Don't heat up your phone;

4. Blot the liquid on the mobile phone, you can use toilet paper and other tools to absorb the water in the gap of the mobile phone, and absorb the water in the mobile phone as much as possible. When absorbing water, try not to move your phone;

5. Place the mobile phone in a ventilated and dry place, and let the excess moisture on the surface of the mobile phone air dry naturally;

6. Customer service center processing: enter the vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to inquire about service center information.

**Link.

Fish out the phone that accidentally fell into the water first, and use a paper towel to absorb the surface moistureNote that the earphone jack and charging socket part are used with a cotton swab or a thin strip of toilet paper rolled into a thin strip of paper to suck up the water, it is recommended to use a hair dryer to blow for more than 15 minutes, and it is best to leave the phone for more than 5 hours after drying it before trying to turn it onCons:

Due to the different parts of the water ingress, this method is risky and may cause damage to the motherboard of the mobile phone, so be cautious!Notes:Do not use the hot air function of the hair dryer, the conductivity of the water and the high temperature of the hot air may cause the battery interface to leak or the internal circuit to short circuit and burn the phone

If the water ingress of the mobile phone is serious, you can clean the water on the surface of the mobile phone first, and then send it to the after-sales service for repair.

First of all, if it is a local water ingress, you can wipe it with alcohol paper, prepare a bag, put the mobile phone in it, put it in the rice bag, and leave it overnight. It is better to cover the phone. If this method does not work, it is recommended to go to a mobile phone store for repair.

If the phone is flooded, don't turn it on, first dry the water on the phone with a hair dryer, the best way is to put it in the sun for a day, and then turn it on.

Change the kitchen knife, change the pot, change the hanger.

After the mobile phone falls into the water, I believe that most users can do the first time to fish out the mobile phone, which is also very important, reducing the time of contact between the mobile phone and water will minimize the damage of the mobile phone. The longer the phone is immersed in water, the more harmful it will be to the phone's earpiece, microphone, screen, and motherboard.

Remove your phone from the water, quickly dry the water on the surface of your phone, and remember not to try to turn it on. Many users will subconsciously press the power button after taking out the mobile phone to see if the mobile phone can still be turned on, which is very wrong, even if the mobile phone itself is not damaged, once turned on, it may cause the result of burning the motherboard.

The correct way to deal with it is to quickly remove the battery after taking out the phone, regardless of whether the phone is turned on before it is dropped. Then throw a few times at the side with more openings on the phone (such as the data cable interface), or the side with a large gap, and throw out the water in the phone. Hold the phone when you throw it, otherwise if you throw it out, you can be ready to buy a new one.

There is a problem involved here,At present, a considerable number of mobile phones can't open the back shell,What to do if the battery can't be taken out,There is really no particularly good way to do this,Generally, the mobile phone will have a black screen after entering the water,For those mobile phones that can't deduct the battery,Don't try to press the boot button after the black screen,Or throw the water out first。

It is not recommended that you take out the battery by disassembling the machine, one is that the disassembly time is relatively long, and the water has already been in contact with the battery at that time, which is of little significance, and the other is that although water ingress will lead to warranty invalidation as private disassembly, but private disassembly may cause more serious damage to the mobile phone than water ingress, so if you are not a master or professional, don't consider the problem of disassembly.

The treatment of water ingress into the mobile phone is as follows:

In daily life, if only a small amount of water is splashed on the phone, it will generally not cause damage to the phone, as long as it is quickly wiped dry.

If you accidentally pour a large amount of water on the mobile phone or soak it in water or rain, then you should be cautious and quickly wipe it with a paper towel or absorbent towel, especially pay attention to the charging interface, headphone jack, speaker, earpiece, buttons and the seams of the fuselage, water is most likely to enter the mobile phone from these places.

1 The phone fell into the water and was salvaged as soon as possible (this is nonsense, please ignore it).

2 If the salvaged mobile phone is an external battery, cut off the power supply as soon as possible, remove the battery, and shake the mobile phone sharply, in order to remove the water in the mobile phone as much as possible, so as to avoid internal moisture corroding the mobile phone motherboard.

3 If it is a mobile phone with a built-in battery, please pay attention (never press the power button!) Don't press the power button! Don't press the power button!

Say the important thing three times! In order to prevent you from being cheap, I have to say it again! Don't press the power button!

Because of the built-in battery, if there is water inside the motherboard, press the power button, the CPU will enter the working state by default, the power supply IC, Wi-Fi module, audio decoding chip will be because there is water inside the motherboard, as soon as it enters the working state, it will cause the motherboard to short-circuit and burn the electronic components on the motherboard, and then take it to the repair shop for maintenance will greatly increase the difficulty of maintenance, and the master will frown, resulting in a negligible chance of repair! So! Don't press the power button after the phone with the built-in battery gets into the water!

4. No matter what mobile phone gets water, the first time is to clean up the water inside the motherboard, how to clean it? 1. Use a dry towel to absorb the moisture on the surface first. 2. If there is a hair dryer at home, use a hair dryer to blow the mobile phone, keep blowing, blow until it is hot, it doesn't matter if your hands are hot, don't worry about the temperature being too high to burn the screen or motherboard, because after our test, the high temperature temperature of the mobile phone motherboard reaches 400 degrees Celsius, and the screen can also withstand a temperature of 80 100 degrees Celsius because of the liquid crystal inside, so just use a hair dryer to blow it.

If the water has already entered the body, you can try throwing the water out of the charging port and the direction of the speaker.

What should I do if my phone gets water?

Step 1: Shut down.

After picking up your mobile phone, you should press and hold the power button to turn off the power button as soon as possible, because water will slowly seep into the circuit, and it is easy to cause a short circuit in the mobile phone when it is turned on.

Step 2: Ventilation.

In order to avoid more damage to the phone, quickly wipe the moisture on the phone with a paper towel, and do not let go of the charging port and earphone port, then take out the SIM card and memory card, and place the phone in a dry and ventilated place. The "put the mobile phone in the rice to dehumidify" circulated on the Internet, or try not to be gullible In case the mobile phone is not saved, the charging port is also blocked by the rice, and the gain outweighs the loss However, in case the moisture in the mobile phone is not cleaned up, it may cause damage to the mobile phone device after turning on, in order to reduce the risk, it is better to go to the after-sales inspection Kangkang

The third step is to go to after-sales.

If the phone is flooded with a lot of water, or other mixed liquids, such as seawater and vegetable soup (salty liquids), even if it dries, it will still accelerate metal corrosion after being wet, and must be cleaned up.

Precautions after the mobile phone gets into water.

Do not move or shake your phone frequently after entering the water, so as not to spread the moisture inside the phone and cause more damage.

Do not blow with a hair dryer or bake at high temperatures after water is in, so as to avoid liquid being blown into the phone and damage the phone by high temperatures.

This can be dried by blow-drying.

1: Your mobile phone supports waterproof performance, you don't have to worry about this, pick it up and wipe it clean, and dry it with a hair dryer! Of course, if you put it in Haidilao, it will be another thing to boil it for a while.

2: Splash water slightly, as usual, pick up the hair dryer at home to dry, and then bury the mobile phone in the rice as said on the Internet, what is the principle? If you splash water slightly, it will not cause a major failure, and it can easily absorb water when buried in rice, and it is generally harmless after drying and absorbing water.

3: Moderate water ingress, that is to say, fall into the water, pick it up immediately, at this time you have to quickly pick up the mobile phone, and use a paper towel and absorbent towel to wipe, especially the earpiece, charging port, headphone port and other places that are easy to enter the water, and then pick up the hair dryer to dry any detail, don't think about throwing the water hard, throwing the phone hard is to think about throwing the water out, and the result is that the water will be thrown into the phone.

The next day to see if it can be used normally, can be used will be, can not be used immediately have to run to the maintenance point, do not delay).

4: Deep water ingress, don't turn it on, don't charge, don't use it! Even if you use a hair dryer to dry, the moisture inside the phone is like this, don't be stupid and think it's okay, what should you do at this time?

Send your phone to a mobile phone repair shop as soon as possible to disassemble it and dry it for repair, because this matter is beyond our control.