Set up a router How to set up a wireless router with one network cable and only one network cable

Look at the router manual, it is very detailed, I open the browser, enter enter, and then enter the username and password, both are admin [default].

The first thing I need to tell you is that when you only have one network cable, you can set up a wireless router. At this time, it can't be set up with a computer, and strictly speaking, you can't use a desktop computer to set up a router.

When you only have one network cable, you can't use a desktop computer to set up a router at this time, because you can't connect a desktop computer and a router because you can't connect a network cable.

When you only have one network cable, you can use your phone to set up a wireless router.

At this time, to set up a wireless router, you can only use wireless devices to set it up, such as mobile phones, tablets, laptops and other wireless devices, which can be used to set up a router.

The most common thing is to use a mobile phone to set up a wireless router, because now almost everyone has a smartphone, of course, the first choice is to use a mobile phone to set up a wireless router.

Tengda N301V2 wireless router setup method:

1.Wireless router settings: the installation and connection of hardware devices, the WAN port is connected to the broadband incoming line, and the LAN port is connected to the computer in the LAN.

2.Set the IP address of the connected computer. Right-click on "Net Neighbors" > "Properties".

3.Click to select "Automatically get IP address" and "Automatically get DNS server address". When you're done, click on the "OK" button.

4.Log in to your router.

Open the IE browser, enter the default IP address of the router (and press enter (as shown below).

In the pop-up login window, enter the username: admin; Password: admin; Then click OK.

5.If you enter the username and password correctly, the browser will take you to the main page of Administrator Mode.

Wireless Router Settings: Set up a wireless connection.

Wireless basic setup.

On the left, click Wireless settings: Wireless basic settings.

7.Select SSID: Select the SSID to be set to encrypt the primary and secondary SSIDs.

Protected Mode: Enables slower 11B GB wireless clients to connect to 11N wireless networks smoothly in complex and multi-mode mode, with "Automatic" by default.

9.The setup is complete.

Setting up a router is inherently a network cable. Unplug the optical modem,Don't connect the optical modem,Plug in the router lan,Enter the computer and set it according to your own way of surfing the Internet (pay attention to avoid IP conflicts,If necessary, change the router IP)After setting,Plug the router network cable into the WAN port,Plug the light cat at the other end,Isn't it done!?

You can't set up a wireless router without a wireless router. First of all, you need to buy a wireless router, about 50 yuan, and set it up according to the manual. If a desktop computer does not have a wireless network card, you also need a network cable, or install a wireless network card.

Thank you for your question.

Do you first confirm whether your router is wired or wireless?

Wired routers can't send wireless signals.

Today's routers have wireless functions, as long as the wireless switch is turned on in the router, and then set up the wireless account and password. If the router doesn't have wireless function, you can only buy one with wireless function.

1. Plug a wireless wifi into your laptop as a hotspot.

2. It is recommended to buy a wireless router, which is not expensive about 200 gigabit routers now.

Connect the router first, and then connect the laptop to the router with Wi-Fi and you can set it up.

What is 1234? Setting up a wireless router is very simple, connect the network cable to the computer in one section, connect the router LAN port at one end, and then follow the instructions at the bottom of the router to enter the background settings.

Go buy a network cable. You're not a wireless router, and even if you're a wireless router, you need to have a wireless network card on each computer to connect to it.

1.First, make sure that the Internet is enabled.

2.A network cable.

3.You can connect the cat directly to the computer.

4.If you have tools, you can pinch four crystal heads with one network cable.

5.That is, 1236 pinched a crystal head.

6.It's the same on the other side.

Pinch a crystal head.

8.It's the same on the other side.

10.I don't know how long your network cable is?

11.If it's long and has tools.

12.It can be divided into two.

13.Consider adding a network cable.

14.If you have a network of more than 100 megabits.

15.A full gigabit wireless router is recommended.

16.The computer network card should also use a gigabit network card.

17.Category 6 network cables.

18.If the activation is less than 100 megabits.

19.CAT5e network cable is fine.

20.Computer network cards and routers with 100 megabits will work.

If you have 4 laptops, you can consider using one laptop as a wireless hotspot and other wireless computers can access the Internet through this computer.

There are a lot of hotspot software nowadays that you don't have to set up by yourself. If those four are not laptops and do not have wireless network cards, find network cables.

It's as simple as conjuring up a network cable. Materials, a rooster that lays eggs, three crickets that don't bark, and 19 mosquitoes that can't fly, pack them up in aluminum alloy boxes, dig a pit of 99 meters, wrap the aluminum alloy box in a white cloth, head down, set the password to 123, bury it in the pit, go to the buried box every day to read Journey to the West, and wait for 7749 days later, buy a network cable on the street, and you can use it with confidence. Big brother, you only have one network cable, and you have a cat, and the router is wired, if you don't buy a network cable, God can't solve it.

Connect the computer to the router, then log in to the homepage of the router through the computer, set the username and password of the WAN port, and select the on-demand connection.

Enable the DHCP service function of the router (after it is enabled, the computer can automatically obtain the IP address, otherwise the router will not actively assign an IP address).

Wireless Settings - In the basic settings, turn on the wireless function and SSID broadcast function; In the security settings, set the encryption method (select the recommended one) and the wireless password.

Turn on your computer's Wi-Fi to connect your computer to your router via Wi-Fi. Then unplug the network cable and let the router and the cat link. You can surf the Internet normally.

One end of the network cable can be connected to the computer, and the other end can be connected to the router.

1. After connecting your router line, click on the desktop to open the browser at the same time. After entering the browser, enter the login of the router**, which is usually.

Second, after entering the router, tap the wireless settings menu, and then tap Basic settings. After entering, we can change the wireless login name SSID, and then turn off the SSID broadcast as shown below (remove the hook). Then put the first one to turn on the wireless function checkbox.

3. Click on the second column of wireless settings on the left, Wireless Security Settings. Once you enter, you can see some password authentication types. At this point, we click on WPA-PSK as shown in the figure below, the first encryption method. Then set the corresponding password in the PSK password field.

Fourth, after all the settings are completed, click on the router, and the system tools on the left. Once the menu is opened, tap Restart Router. Because all changes to the router will not take effect until they are restarted.

Two connection methods: corresponding to different setting methods. Depending on your needs, choose whether the first interface is connected to a wired WAN port or a WAN port to a wireless router.

1. The network cable is connected to the WAN port of the wired router, and the LAN port is connected to the WAN port of the wireless router. (High utilization, one more available wired interface than the second one) The following method enables DHCP for both routers

1.When the network cable is connected, depending on whether you have a fixed IP or a dial-up number, you can set it in the WAN port.

2.When connecting to the next router, make sure that the DHCP pools of the two routers are not the same. Select DHCP mode on the WAN port of the second router.

2. The network cable is connected to the WAN port of the wired router, and the LAN port is connected to the LAN port of the wireless router.

In this way, you only need to turn off the DHCP of the second router.

Look at your supplement is the first way to pick up!

You can directly connect the root network cable to the first router, in fact, the first router doesn't need to be used at all, because the general wireless router itself has a four-port, or eight-port wired interface.

Connect the wired first, and then connect to the wireless from the wired.

Yes on the main router, the wireless router needs to be set up. Three key points 1, the line from the main router should be connected to the WAN port of your router. Don't get a mouthful.

2. Enter the router to check the WAN configuration, whether it is a dynamic IP or a static IP, depending on your total router, if the total is automatically assigned IP, then your router uses dynamic, otherwise, static, if static, you need the administrator to help assign one, enter your router.

3. Turn on the wireless function of your router and the DHCP function.

I can't figure it out, how can you go online without preparing two network cables, just to set up a router?! Lost the Internet?

First, the PC is connected to the router and set up to save, and then the cat connection router is powered on, and then it is fully automatic.

After connecting, you need to set the address of the computer network card to, and then enter ::, the management interface appears, and follow the configuration wizard to set up the Internet access account and other information step by step. Select PPPoE mode for dial-up Internet access.

1. Use a network cable to connect the laptop to the router, set the IP configuration of the computer to automatically obtain the IP address, and then check what the IP address of your computer is, you can run CDM and output ipconfig to view.

2. Open IE, enter the IP address you found in the address bar, and change the last group to 1 that is your routing address (, at this time you will be asked to enter the username and password, usually both are admin, if not, please check the instructions on the routing shell.

3. Follow the wizard to enter the username and password of PPOE, and then turn on the wireless function in the wireless settings. At this time, you will be asked to restart the route, and after the route is restarted, you can use the computer's wireless network card to find your wireless route.

4. Use a network cable to connect the router and the cat, then you can use wireless Internet access!

PS:1. In order to prevent others from hotlinking, you can set a routing password, and it is recommended to choose the WEP encryption method.

2. If you want to prevent others from using the network card, you can also turn on the MAC filtering function.

Do you have a wireless SIM card on your computer?

Notebooks are a lot of work.

Netbooks are all available with wireless Internet access.

If it's a desktop, there is generally no wireless function, unless you go and buy a wireless card.

You can also buy a network cable.

The wireless network card is about 100 yuan.

The network cable is 1 yuan per meter.

It's better to buy a network cable. You don't have to set up wireless routing.

It's good to turn off the wireless function of the router, because someone else has that kind of rubbing network card (wireless network card) that can receive your signal, and then he can surf the Internet for free for a long time.

Buy a network cable bar, a few cents a meter in the computer city. The maintenance station is 1 yuan per meter.

It is also possible to buy the one with a crystal head that comes with a complete package.

It's super simple,Pull back the network cable plug on the LAN port,Set it to dynamic acquisition,You can't get the static address set,Your computer can not be plugged into the WAN port to access the Internet,Static address look at other people's computers,Don't be the same,In the end, as long as it's between 0 and 255。

Buy a switch and plug it in to use without a router or a network cable One end is plugged into port 1234 of route A and route B is plugged in port 1234 Any port may have a conflict between the IP of two routes You need to change the IP of one of the routes to for example.

Should be plugged into the WAN port to choose dynamic IP or static IP to surf the Internet! If it is plugged into the LAN port, it cannot be used wirelessly, but can only be used as a switch!

Choose one of the two.

You don't need to change any IP address when you come to the cable, but you need to turn off the DHCP of your router;

When the line is plugged into the WAN port, the WAN port of your router is set to static or DHCP, and the others are arbitrary.

There are two ways to do secondary routers:

1. AP mode:

You only need to change the LAN port address of the wireless router to an infrequently used one (for example, change it to avoid conflicts, disable DHCP, enable wireless-related functions, and then insert the line from the main router into the LAN port).

The computer connected to it is wireless or wired, and it is connected to the Internet in the same way as if it were directly connected to the main router.

2. Routing mode:

Change the LAN port address of the wireless router to another network segment (for example, if DHCP and wireless related functions are enabled, the WAN port uses a dynamic IP address or a static IP specified by the main router.) Insert the line from the primary route into the WAN port.

The computer connected to it uses a dynamic IP address or a static IP address in the network segment to access the Internet.