I have a network cable directly connected to the computer to access the Internet, how can I use a wi

This answer is to the notebook. Whether your network cable is LAN or extranet.

The LAN is a fixed IP address that has been assigned, and the external network does not use a fixed IP address) If it is a local area network, it does not use a cat, and the external network must be a cat. If you have a cat dialing (broadband) to the wireless router, the router will be turned on wirelessly, the dialing will be successful, and the local connection of the computer will automatically obtain the IP address. Hope you can see it.

If you don't understand, you can directly find a computer repair and network ** provider.

You can only use the intranet net without cats

Do you have a wireless card? Add a wireless network card and it's OK

Yes, the network can be given to any networkable terminal, it does not have to be a computer. Broadband dial-up can be done by routers or optical modems.

Of course, the router can provide wifi signal for all kinds of network devices, including mobile phones, computers, and mobile phones can also set up routers.

Summary. Hello, I'm glad to answer for you, as far as I know, yes, but you need to use a computer to operate it at the beginning of the installation, and then you can access the Internet without a computer. Most of the routes on the market can implement this function, but they just need to be set up.

Plug the network cable directly into the router, can I use wifi without a computer?

Hello, I'm glad to answer for you, as far as I know, yes, but you need to use a computer to operate it at the beginning of the installation, and then you can access the Internet without a computer. Most of the routes on the market can implement this function, but they just need to be set up.

1.If you use TP series routers, such as TP-Link 840 841 845 847 series, you can set the WDS wireless bridging mode to introduce other routing signals into your router through the WDS wireless bridging, and then send them to other devices such as laptops, desktops, iPads, iPhones, Android phones, etc. 2.

If you are using the DLINK series, many of the routes of this series of Youxun do not support WDS bridging, but some models support wireless bridge bridging, that is, the wireless signals of other routes are directly introduced into your route, and even the SSID and key are not changed, which is equivalent to directly using the signals of other routes.

It is my pleasure to answer your questions, and I hope I find it helpful to you<>

A router needs to be installed so that the wireless computer is not delayed.

Connection Diagram:

Here's a brief introduction to how to set up routes.

2. Click the setup wizard and select the PPPoE dialing method.

3. Fill in the broadband user and password.

4. Wireless SSID and password settings.

5. Click Done to restart the router.

You can call customer service and he will teach you! I used to buy it and I didn't know how to get it and just call the customer service computer.

Hello, it's not enough to have a network cable, the role of a router is only to allow multiple computers to use one network. Only one network cable is not enough, you also need a cat (modem), the router cannot dial over the network, and you also need the cooperation of the cat. Therefore, one thread is practiced for different drops!

It's better to buy a cat, and if you talk about general telecommunications, you can also come to your door to install it for you, and you don't need money to buy a cat (on our side). Added: If your router is advanced and has cat functionality, then you can connect directly).

As for the settings, if you have any questions, ask me.

What kind of network cable do you need if you have wireless, just connect the network cable directly to the router and set it up, your computer has a wireless network card.

Check whether the LED light of the WAN port on the router is on, if it is on, it means that there is a physical signal, and if it is not on, it means that it is physically not connected, change the device or network cable and try again.

Then log in to the router to check the WAN port settings, what mode is selected, the general telecom should choose PPPoe connection, you can open the setup wizard on the router step by step settings, enter the Internet account and password given by Telecom, under normal circumstances.

You check the network cable that connects the cat and the router, one end is connected to the cat, the other is connected to the router, and the other side is connected to the router, there are five ports, one of which is different from the other four, that is called the WAN port, and the other is called the LAN port.

If the router's settings page shows that the WAN port is not connected, there are only two possibilities.

1. The wire is connected incorrectly.

2. The route is broken.

You plugged in the wrong port, the network cable of the cat to the router to check the WAN port of the router, not the LAN port, generally the only excuse with a different color on the router, it should be marked. Then the router is to be set up.

Routing issues may be broken or not set up properly.

Yes, but you need to use a computer to operate it at the beginning of the installation, and then you can access the Internet without a computer. Most of the routes on the market can implement this function, but they just need to be set up.

1.If you use TP series routers, such as TP-Link 840 841 845 847 series, you can set the WDS wireless bridging mode.

Introduce other routing signals into your route via WDS wireless bridging and then use them on other devices that you send to your own devices, laptops, desktops, iPads, iPhones, Android phones, etc.

2.If you are using the DLINK series, many of the routes of this series of Youxun do not support WDS bridging, but some models support wireless bridge bridging, that is, the wireless signals of other routes are directly introduced into your route, and even the SSID and key are not changed, which is equivalent to directly using the signals of other routes.

3.Both methods can be used, but generally speaking, WDS needs to convert other signals into signals encrypted by your routing key, the algorithm is more complex, so the CPU calculation of the route is large, which is easy to cause the route to heat up, and the heating transition will crash, generally I use WDS to bridge, there is no problem with using it in winter, and you need to restart the route once after about an hour of use in summer, this problem can be solved by replacing the professional-grade route. For the wireless bridge mode, your router is only equivalent to a wireless transceiver device, which generates heat.

Smaller, less likely to go wrong.

1.A router is a router that connects various LANs and WANs on the Internet.

It will automatically select and set the route according to the situation of the channel, and send the signal in the order of the best path. A router is the hub of the Internet"Traffic police.

At present, routers have been widely used in all walks of life, and various products of different grades have become the backbone network for implementation.

The main force of internal connection, interconnection between backbone networks, and interconnection between backbone networks and the Internet. The main difference between a route and a switch is that the switch takes place in the OSI reference model.

Layer 2 (the data link layer, while routing takes place at the third layer, which is the network layer.

This difference determines that routers and switches need to use different control information in the process of moving information, so the way they achieve their respective functions is different.

2.A router, also known as a gateway, is used to connect multiple logically separated networks, and the so-called logical network represents a single network or a subnet.

When data is transferred from one subnet to another, it can be done through the router's routing function. As a result, the router has a judgment network address.

And the function of selecting the IP path, it can establish a flexible connection in the multi-network interconnection environment, and can connect various subnets with completely different data packets and media access methods, and the router only accepts the information of the origin server or other routers, which is a kind of interconnection device at the network layer.

OK. As long as you can access the Internet with this network cable, you can go online after buying a router and setting it up in the correct way to access the Internet.

You can also set up a router on your phone.

Yes, it is mainly transmitted through the router, and it has nothing to do with the computer

I don't think it works if you don't debug it.

1. That is, the router wireless is not turned on.

2. The allocated IP address has been exhausted.

3. DHCP is not enabled, and a static IP binding policy is used.

4. Your computer's wireless network card is not turned on.

Tell you, 2 can be used at the same time, analyze the reasons above, it is estimated that these are the kind.

OK. But set it up with a computer first.

The computer can be used with wifi if it is not turned on.

As long as this network cable can access the Internet, you can access the Internet after buying a router and setting it up in the correct way to access the Internet. You can also set up a router on your phone.

Plug in the wireless router, don't answer the cat first, connect the wireless router wirelessly to the mobile phone, enter the gateway address in the browser, enter the settings page, and set it according to the PPPoE (ADSL virtual dialing) method. Then set the SSID, encryption method, and password. Save, restart.

After setting, connect the network cable from the cat LAN port to the WAN port of the wireless router.

Note: The premise is that the router must be debugged before you can use WiFi.