How do I set up a wireless router for a wireless network? It s the kind of 5 that doesn t plug in th

First of all, there is an exclamation mark to indicate that you have connected to the router, but the router is not connected to the Internet, so you need to enter your Internet access and password in the router's settings screen.

No matter how bad it is, you can find the tab in the infinite routing function in the settings interface of the router, and then change the "name" of your router and then use the wireless network configuration of the computer to search for the name you set, and at the same time set the router connection password.

The tab for entering the password is generally called, the setup wizard, and you can set the password step by step according to the prompts, so I wish you a happy use. ）

It means that you have connected to the router but not connected to the Internet, you must not have set up the Internet and password, first figure out what type of network your home is, ADSL dial-up or broadband, how to set up your next wireless network, there are a lot of ** analysis, you can understand at a glance.

In this case, you can set up the DNS assigned to you by the operator, the general home broadband, such as Unicom, the Great Wall, will assign you a fixed DNS address, your situation belongs to the wireless router has been connected, but the router settings are incomplete and can not connect to the Internet, check the DNS address assigned to you from ipconfig, choose to use static IP, fill in DNS1,2 into the corresponding settings, save the setting, should be the exclamation mark is gone, Hope it helps.

Did you use your computer to find your wireless network?

If you don't connect the network cable, you need to insert the **card, and you can establish a hotspot wireless network through the **card.

The kind of built-in wifi that does not need to be plugged in directly without a card may also exist, but it is very unstable. You can go to the e-commerce platform to find it.

There's a wireless router that doesn't require a network cable.,But it's with a mobile phone card.,Take the traffic of the phone.。

The wireless router must be connected to the network cable! No router and no wireless network that doesn't need a network cable!

Pro, the wireless router only converts the network data signal transmitted by the wired connection into a wireless wifi data signal and transmits it, and does not generate the network data signal out of thin air, so it is necessary to install a broadband network in order to have a wireless network to use.

There is a wireless network that does not require a network cable, that is, a wireless network card device, which is a mobile communication device, and then let this device send a hotspot for us to use.

The router must be connected to the network cable, otherwise the router cannot connect to the external network.

You can only do bridging.

You can use a broadband connection to dial-up the Internet, and the specific operation method is as follows:

1. Find the broadband connection app icon on your computer desktop and double-click to open the broadband connection app interface.

2. In the open broadband connection panel, enter the broadband account and password.

3. After entering the broadband account and password, click Connect below to successfully connect to the network.

Hello, the WAN port must be connected to the network cable, you can set it without a network cable, and the mobile phone can be set up.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router.

Settings interface. (If you can't get in, please look at the nameplate at the bottom of the router.)

Or the router instruction manual, the default settings of different models of routers are different. ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Yes, as long as the device is connected to the route, you can enter the route settings

The laptop is connected to the network corresponding to the wireless router via WiFi.

1. Turn on the "Connect Me WiFi" function.

2. According to the opening prompts, click on One-click Create, set your own WiFi account and password, and you can use it.

3. Turn on your phone to start connecting, and then enjoy the free fast data.

Plug the broadband network cable into the WAN interface of the router, connect the computer to the LAN interface of the router with the network cable, and set the router as follows:

1. Log in to your router (enter or log in in IE, enter the username and password, and the router label is there.) Usually admin).

2. Enter the "WAN" setting: A If your broadband is to have an account password, set PPPoE, fill in the account password, select automatic connection in the connection mode, and confirm, if your operator binds the account to your computer, choose to copy the terminal MAC address b If you don't need the account password, if you are given a fixed IP, please select a fixed IP address, and fill in the correct address of the fixed IP address, mask, gateway, and DNS c If you don't need the account password, If it is a dynamic IP address, select a dynamic IP address and enter the DNS address.

3. Go to the wireless settings, select WEP or WP2-PSK, set the wireless password, and remember this password.

4. Go to the "DHCP" settings to activate the DHCP server.

5. Connect the broadband network cable to the "WAN" port of the router.

6. Connect the computer to one of the "LAN" ports of the router.

7. The computer is set to automatically obtain IP address and DNS address.

8. Turn on your wireless device to search for wireless network (mobile phone should support wifi), wireless network SSID, is the name of your router, enter the password you set to computer, mobile phone, wireless device should be able to access the Internet.

With a wireless modem with a routing function.

Or share a local connection, create a new point-to-point connection, and connect your phone to a computer to establish a point-to-point connection.

Set up auto-dialing on the router.

The wireless router is only a device that realizes the wireless transmission of the network to the computer, and it cannot receive the network wirelessly, so the WAN port of the wireless router must have a broadband network cable.

Your statement is not very clear, or you mean that the router WAN port has an external network incoming line, but if the LAN port is not connected to the desktop, the laptop will not be able to access the Internet, and the desktop notebook can only be connected to the Internet wirelessly.

But this is not possible. Because the desktop will not transmit a wireless network signal, unless your desktop has a wireless network card, installed with a win7 system, but! If so, your desktop can access the Internet without having to plug in a cable. And no one is usually bored enough to set this thing up for you.