Will the fuel consumption of the throttle wash of the car decrease

It's a little bit of a relationship, it affects the idle speed, you can clean the air intake system, the fuel system, this relationship is a big deal.

The throttle valve must be cleaned. When it comes to fuel consumption, I want to talk to you, in fact, many fuel-saving products now advertise themselves as having the effect of reducing fuel consumption, but when it comes to reducing it is just a trick, fuel consumption depends on the engine itself and the driver's control, if the control remains the same, fuel consumption will change with the new, old, dirty, net of the engine, of course, the dirtier the engine oil circuit, the fuel consumption will increase. This results in fuel-efficient products.

Most of the fuel-saving products on the market are actually based on cleaning the oil circuit, so that the engine can be restored to the best state and the fuel consumption can be restored to normal levels. For example, when a new car leaves the factory, the fuel consumption is 8, and after 3 years of driving, the fuel consumption will increase little by little, 8, 9, 9 ......, 10 pcs. At this time, the owner uses fuel-saving products, and the fuel consumption will return to the initial 8.

In fact, fuel consumption has only returned to its original level. Unscrupulous merchants will use this as a boast to boast about how their products can reduce fuel consumption, but in fact they are only restored to their original state.

Hello friends, depending on the throttle opening before and after cleaning, if the carbon deposit is not serious before cleaning, and the throttle opening before and after cleaning is not much different, the trend of fuel consumption decline is relatively small, if the carbon deposit is serious, the throttle opening before and after cleaning changes greatly, so that the fuel consumption will be reduced.

The fuel consumption of the throttle wash of the car will decrease, and the list will not be displayed at that time It will come back after a few days.

Hello dear! Yes! But it will take a while to show up! I hope my answer is helpful to you, please also set it to. Thank you!

After cleaning the throttle, the fuel consumption will increase significantly in a short time, which can be stabilized for a period of time or reset by the computer, and it can be restored to normal.

There are several possible reasons for this.

1. Due to the cleaning of the throttle, the relevant matching process is not done, resulting in the computer testing program or according to the original throttle to calculate and adjust the amount of fuel injection, for this possibility, under normal circumstances, the car will be driven for a period of time, it will slowly adapt.

2. Because the throttle valve has not been cleaned for a long time, the throttle valve and throttle arm position are worn too much, and the gap is larger after cleaning the throttle valve at this time.

3. If the throttle is too dirty, the intake branch pipe and valve foot position must be dirty. Once the throttle is washed, this equilibrium is broken, resulting in higher fuel consumption after the throttle is cleaned.

Throttle cleaning frequency:

1. How long the throttle will be dirty depends on the quality of the air filter, the brand and quality of the engine oil used, the condition of the driving section, the air temperature, the working temperature of the engine, driving habits and other aspects.

2. Even in terms of individuals, it is not possible to use a fixed number of kilometers to determine the time of cleaning the throttle, the first time the new car cleans the throttle interval is the longest, and then due to the continuous condensation of oil and gas in the crankcase ventilation pipe and the intake duct, the cleaning frequency will increase, and different weather will also affect the speed of the throttle dirt.

Generally, more than 100,000 cars need to be matched and learned after cleaning the throttle!

SSSS finished washing, did you clear the code with the computer? Otherwise, the idle speed is high at the beginning and it costs fuel.

The problem has increased significantly! Normally, you can run 100 kilometers with 3 blocks of oil, but now you can run less than 40 kilometers!

Wash the throttle and injector.

Hello 1The first case is due to the cleaning of the throttle.

After that, it is not matched with the control unit of the engine or the matching is not successful. Because most models now use electronic throttle, that is, there is no traditional throttle cable. The depth of the accelerator pedal pressed by the driver is transmitted through an electronic signal, and when the engine control unit receives it, it will command the throttle to open the corresponding opening to ensure the driver's acceleration needs.

When the throttle is dirty and cleaned, the position of the throttle is relatively unfamiliar to the engine control unit, and there will be confusion when controlling its throttle opening, resulting in an increase in fuel consumption.

The second situation is a normal phenomenon, and some models have the ability to learn from the engine control unit.

Even if the throttle and control unit are correctly matched, there will be a situation where fuel consumption will increase for a short time, but it will return to normal after a period of driving.

Clean the throttle.

It must be initialized.

After cleaning, there is no clogging of sludge, if the throttle still maintains the previous opening, then it will cause excessive air intake, the consequence is that fuel consumption increases, the engine shakes when starting, and the acceleration is weak, and the engine fault light may also be lit.

After cleaning the throttle, initialization is necessary, because when the computer adjusts the throttle opening, it has a memory function, because there was a blockage of sludge before, in order to ensure the air intake, the computer will automatically adjust the opening of the throttle to make the intake in a normal state.

So why sometimes it works without initializing the engine after cleaning the throttle? That's because the throttle isn't too dirty, and after washing, its intake hasn't changed much. However, the changes in the throttle after cleaning cannot be observed with the naked eye, so initialization should be done.

Extended Information:Initialization Methods:

1. Open the second gear of the key, which is the gear where the instrument indicates that it is fully lit, and then wait for 20 seconds, step on the accelerator to the end, keep it for about 10 seconds, release the throttle, turn off the ignition switch, pull out the key, and the initialization is completed.

2. Open the second gear of the key, hold it for 30 seconds, then turn off the ignition switch and pull out the key. It should be noted that after the two methods are done, you have to wait for a period of time before you can try to ignition, generally wait for 15-20 seconds, and then ignition to see if the refueling is normal, whether the engine fault light is extinguished, if it is unsuccessful once, do it a second time, until it is successful, it can generally be successful at one time, at most twice.

However, depending on the car, the restoration method is different, some cars must be initialized through the computer, if that is the case, the car needs to be sent to a store with professional equipment to initialize.

Normal, I've cleaned it before. After cleaning the throttle, the new car computer needs to relearn the driving habits and fuel allocation. This process can take anywhere from a few days to dozens of days.

After cleaning, at least you need to drive for a while to get used to it. When the idle speed is stable, it can return to normal.

In the case of unstable idling and increased fuel consumption after cleaning the throttle, the throttle opening is basically because the throttle opening is not reset. Due to long-term carbon deposition, the carbon deposition squeezes the throttle, and the throttle opening expands accordingly. When we clean the throttle, if there is no reset, the throttle opening will remain in the state before carbon deposit, which will lead to an increase in air intake, and in severe cases, there will be unstable idle speed and fuel consumption.

So how do you reset the throttle opening? Nowadays, most cars use electronic throttle, and the throttle needs to be initialized by using a computer equipped with a diagnostic instrument to achieve normal idling. There are also some older models that also use mechanical pull wire throttle, so these cars will gradually reduce the throttle opening to the initial state in the future driving, and the idle speed will naturally be stable.

The throttle is like our human "throat" that controls food swallowing, while the throttle is a controllable valve that controls the entry of air into the engine and has the depth of the throttle, and the size and fit of the engine power are determined by the throttle opening. As we all know, the air contains dust and sand particles, and when the air passes through the throttle, it naturally leaves impurities on the surface of the throttle, which, combined with the oil vapor vented from the crankcase, leads to the formation of black putty deposits. What are the effects of a dirty throttle?

First of all, it must be the engine power, the throttle is too dirty, the throttle movement is inflexible, and the air entrainment into the engine is stuffy and stuffy, which affects the normal combustion of gasoline, reduces the engine power, and seriously idles unstable, and the power of the starting difficulty and fault state decreases.

Of course, there are some "tricks" on the Internet, such as cleaning the negative plug of the throttle battery or hitting the key to the ON position for a few minutes to turn it off after cleaning, and then turning to the ON position again, without stepping on the accelerator, and then starting the car. Some car owners of this method reflect useful, some car owners reflect that it is not, in fact, the reset method of different models is different, of course, the most effective is to use the computer with it.

If the fuel consumption or vehicle speed increases after cleaning the throttle, the main reason is that the matching between the throttle and the corresponding computer is not completed. After the matching operation of the normal steps is completed, the car will run for a long time, and the owner does not have to worry too much.

This may be because when I was cleaning the throttle, I accidentally injured the circuit inside, which eventually affected the engine and increased fuel consumption.

Because of the reason for the unstable idle speed, it is easy to have an unstable idle speed after cleaning, which will lead to this phenomenon.

This may be because the throttle aperture of the car has been worn out for a long time, and the dirt attached to the throttle valve after cleaning has decreased, and the aperture has become larger.

It may be because there are a lot of changes in the car after cleaning, so there will be such a fuel consumption situation.

Hello, I am a master with decades of experience! I've seen your problem! I will reply to you within five minutes, and after answering, if you are satisfied, can you give me a thumbs up? Thank you!

Hello, the fuel consumption will increase significantly in a short period of time after cleaning the throttle, because the original throttle has carbon deposits, and the carbon deposits are gone after cleaning, the air intake increases, and the fuel consumption increases.

If you can, please give five stars and give a thumbs up, thank you!

QuestionI want to ask if throttle cleaning is fuel-efficient.

I would like to ask if throttle cleaning is fuel efficient.

Ask how to remove carbon deposits.

The engine has carbon deposits and is treated in this way.

Can Fuel Treasure remove carbon deposits?

1. One is that the carbon deposition is not serious, and the non-dismantling cleaning method is adopted, and the cleaning is carried out by adding a special cleaning agent liquid;

2. Secondly, if the carbon deposition is serious, the cylinder head is used to clean the valve and cylinder block;

3. Another is to take preventive and remedial measures to minimize carbon deposits, use clean fuel that meets the mark, develop good driving habits, shift gears to more than 2000 rpm by hand, and regularly pull the high speed to make the engine run at high speed and eliminate slight carbon deposits.

Hello, it turns out that due to too much carbon deposits on the throttle, it will cause the throttle to close loosely. After removing the carbon deposits on the throttle, the air intake volume has changed, but the engine computer is still controlling the fuel injection according to the original data, so it leads to high fuel consumption, and you can run for a while to let the engine store new records, and the fuel consumption will be reduced.

Generally, more than 100,000 cars need to be matched and learned after cleaning the throttle!

In fact, this is a normal phenomenon and there is no need to worry. Because after the cleaning is completed, the throttle valve must be re-matched with the computer, and the normal operation of the engine can be ensured after the matching is completed, and the phenomenon of high fuel consumption and high speed after the car throttle cleaning will disappear.

The increase in fuel consumption of throttle cleaning may be due to the increase in the injection diameter of the injector after cleaning, and the increase in fuel injection per unit time, so the fuel consumption increases. After the oil circuit is washed, it is necessary to use the computer to match and learn, otherwise the data read by the computer is still the data before the washing, and at this time the owner has been washed, but the computer parameters are still like that, so the increase in the channel and the fuel injection will become fuel-efficient.

Cleaning & Prevention Notes:

1. It should be disassembled and cleaned.

2. Correct some cleaning errors of the throttle.

3. The main reason for the formation of throttle dirt comes from the oil vapor, followed by the particulate and moisture rights in the air, that is, in the case of using a qualified air filter and removing the crankcase ventilation pipe, the throttle dirt speed will be much slower.

4. The crankcase has a built-in crankshaft, and the oil bottom is connected to the bottom, and the working temperature of this part is about 100° 180°.

After cleaning the throttle, the corresponding matching operation is not done, which leads to the detection program of the driving computer to calculate and adjust the fuel injection according to the original throttle, so the fuel consumption increases after cleaning the throttle. Generally, as long as the car is bent for a certain period of time, the driving computer will automatically adapt and adjust the amount of fuel injected.

Excessive carbon accumulation on the throttle valve and the fact that it has not been cleaned for a long time have caused excessive wear and tear on the throttle valve valve and throttle arm. After the throttle is cleaned, the clearance of each component increases, resulting in higher fuel consumption.

Precautions for throttle cleaning.

When cleaning the throttle, be sure to remove the throttle and clean it, so that it will be clean, and there will be no spray of the cleaning liquid in one direction, it will spray into the electrical part of the throttle, and in serious cases, it will damage the throttle door.

When cleaning the throttle, it is necessary to spray the throttle cleaning liquid to the position where there is more carbon deposit, wait for 5-10 minutes, and wait for the carbon deposit to be dissolved by the cleaning solution, then take a clean brush and brush it, and then wipe it clean with a clean towel.