-
You don't know how to play table tennis. Can you play with a double-sided adhesive racket? The bottom plate and rubber of table tennis balls must be tightly combined in order to play the role of bottom plate and rubber.
Double-sided tape is not good at all, although it can be glued, but it is equal to an extra layer in the middle, and it is also sticky. Honest and practical special glue sticking it. If you don't have it, you can stick it with rubber water used to stick tires.
The lifespan of rubber is generally two months to half a year, and it can be used for one year if you cherish it. After a long time, there will be a significant decrease in performance.
Novices can use the pure wooden bottom version of the galaxy, choose a softer model, I don't remember the specific model, probably** is in 80-100, suitable for novices. The front rubber is used for the road goods Hurricane 3, about 60 pieces, the reverse side is selected according to your horizontal shooting, and the reverse side is selected as a 729 reverse special rubber, which is about 20-30 pieces. Then practice the horizontal shot to practice the two-sided arc circle, and the straight shot to practice the arc circle and the straight shot horizontal stroke.
You better practice more, look at your problem shows that you don't have a foundation now, and when you practice a lot of skills, you will know what is uncomfortable with the racket, and you can lose the novice racket and replace it with a racket that suits you, and you will also understand the difference between the racket. If it's just for fun and you're not ready to improve, then you can hit it with a wooden plank, and you can just buy a racket.
-
How can you use double-sided tape! What a waste... There is a special glue for sticking rackets, and there are sports goods stores and table tennis stores. I used a red double happiness four-star board, and the skin of Hurricane 3 was only more than 200 yuan.
If you want to use a better one, you can use the skin of Hurricane 4 or 5, which is about three or four hundred, and if the board is a little better, it will be about five hundred. Specifically, you can go to the store to consult, and build a different one in different places. You don't know how to ask me
-
With double-sided tape, it's so creative! There are many benefits, first, very good spike bottom plate performance, and second, it is good to destroy the sponge and bottom plate elasticity, and there are many benefits...
For high school students, it is recommended to buy a 150-200 domestic baseplate, which can be bought with carbon; The selection of the auction should be carried out according to your own technical characteristics, hehe.
It is enough to match the rubber of the three + 20 or so.
-
Sticky table tennis rackets are not considered to be able to be glued with double-sided tape, because that will make the sea surface lose its original elasticity, and it is not conducive to many times"Gluing"
If you have a professional table tennis glue, it is the best, but compared to **, for amateur or semi-professional athletes, it is somewhat luxurious, it is recommended that you use the glue to make up the table, although the glue is toxic, but it will hardly hurt the body, after all, it is only about 1 week to play a poop of glue.
And those toxic glues can be used in a lot of ordinary competitions.
Therefore, it is recommended that you buy a patch of glue, which is also very elastic.
Avoid. Don't use a glue with a very high viscosity, think of the 101 kind. The best way to maintain the elasticity of the sea surface is how much glue you have, if you use the racket frequently, you should hit the glue once every 4-7 days, and the glue must be evenly brushed.
Well, if you have any other questions, I can continue to help you!
-
It is recommended to change the board After all, it has been 4 years, and your level has improved a lot, and it is estimated that the original board is no longer suitable for you.
Galaxy MC-2 crystal bottom plate 80 yuan.
Forehand mad three 42 degrees 70 yuan.
Backhand CJ8000 36 38 degrees 25 yuan.
The classic configuration saves a lot.
Hope it helps the landlord!
I wish the landlord a better game!
-
Such a cow, double-sided tape. You're invincible. Just use Haif's Dolphin series
-
1) There is no limit to the size, shape and weight of the racket. But the bottom plate is flat and hard. The thickness of the base plate should be at least 85% natural wood. Strengthen the bonding of the base plate with e.g. carbon fiber, glass fiber, as much as possible.
or compressed paper and other fibrous materials, each layer of adhesive does not exceed the total thickness of the base plate or millimeters.
2) The paddle surface used to hit the ball should be covered with a layer of particles facing outward"Ordinary granular glue"covering, together with the adhesive.
thickness not exceeding 2 mm; or dust with particles inward or outward"Sponge glue"covering, together with adhesive thickness not exceeding 4 mm. "Ordinary granular glue"It is a layer of foam-free natural rubber.
or synthetic rubber, the particles of which must be distributed over the entire surface at an average density of not less than 10 and not more than 50 per square centimeter. "Sponge glue"That is, a layer of foam rubber is covered with a layer of ordinary granular glue, and the thickness of ordinary granular glue is not more than 2 mm.
3) The covering should cover the entire surface of the photograph, but not beyond its edges.
4) The bottom plate, any liquid dust in the bottom plate, the interlayer, the covering and the adhesive layer should be a whole with uniform thickness.
5) Both sides of the racket, with or without covering, must be matte and bright red on one side and black on the other.
6) If there is a slight difference in the integrity and color consistency of the surface due to accidental damage, wear or fading, it can be used as long as there is no significant change in the performance of the face.
7) Players should place their rackets on the table of the game during breaks in competition, unless specifically permitted by the referee.
8) The paddle cover can be bonded with pressure-sensitive adhesive tape or other ITTF-approved adhesives.
Therefore, if you don't cover the reverse side of the tape, you can't use the reverse side to hit the ball!
-
No, it's not in violation.
No Pai Xiang is able to stick the sponge without the rubber, nor can it be the dust to the light with the rubber without the sponge.
In both cases, the banquet tent is a violation.
But then again.
In amateur competitions, the rules are not very strict, and violators abound.
Official professional competitions are absolutely not allowed.
-
To make the double-sided tape pill, you need to pull the tape (the sticky side is facing up), use the cut small piece of tape (the sticky side) and the sticky side of the tape to stick to each other, and stick it all the time, when that small piece of tape has a ball, take down the poor ball and continue to stick, when the adhesive tape will stick out the silk and roll it with the tape ball, you can't use the sticky one, otherwise the ball will not be hard.
Adhesive tape can stick things because it is coated with a layer of adhesive on its surface, the earliest adhesives came from animals and plants, in the nineteenth century, rubber was the main ingredient of adhesives; In modern times, a wide range of polymers are used. Adhesives can stick to things because of the bond formed between the molecules themselves and the molecules to be connected, and this bond can firmly bond the molecules together.
Instructions for the use of double-sided tape.
The adhesive surface must be kept absolutely clean and dry, and can be scrubbed with alcohol or acetone, etc., and the cleaned surface can be pasted with glue rock tape after the solvent has completely volatilized. Avoid the contact between the fingers and the glue surface during operation, and press hard after pasting to ensure the full contact and wetting of the glue surface.
Before applying the tape, the foam double-sided tape should completely remove the oil and dust from the substrate, wash off other pollutants, and then tear the tape, paying attention to fingerprints or other polluting substances.
According to the size of the substrate to be pasted, cut off the tape, and squeeze it vigorously after pasting, and the surface and pressure of the tape are carefully pasted, and sufficient pressure is required when pasting. The adhesion of the tape is best for 72-96 hours after lamination, and a primer is required for substrates such as plastics, erasers, special coatings, etc.
-
Sticky table tennis rackets are not considered to be able to be glued with double-sided tape, because that will make the sea surface lose its original elasticity, and it is not conducive to many times"Gluing"
If you have a professional table tennis glue, it is the best, but compared to **, for amateur or semi-professional Yunye old mobilization, it is somewhat luxurious, it is recommended that you use mending glue, although the glue is toxic, but it will hardly hurt the body, after all, it is only about 1 week to play a piece of glue.
And those toxic glues can be used in a lot of ordinary competitions.
Therefore, it is recommended that you buy a glue to repair the table, and the elasticity of the glue is also very good.
Avoid. Don't use a glue with a very high viscosity, think of the 101 kind. The best way to maintain the elasticity of the sea surface is how much glue, if you use a racket to take the spine frequently, you should hit the glue once in 4-7 days, and the glue must be evenly brushed.
Well, if you have any other questions, I can continue to help you!
-
Hello dear, happy to answer your questions. Table tennis rackets can be glued with two layers of glue on one side, but there are regulations in regular competitions that are not allowed, and it is actually okay to play by yourself. In the official competition, the design of the rubber set is originally a stick to the bottom plate to have power.
The ITTF stipulates that the thickness of the rubber sleeve cannot exceed millimeters, and the thinnest sleeve is also 3mm thick. Even if it is allowed, it is too heavy for the queen mother, and it is stupid and slow to hold. Closed balance
-
Summary. If double-sided tape is not available, you can try using other adhesive materials, such as clear glue, velcro, etc. You can also try dipping your fingers in water and gently rubbing the ball several times to wet the surface of the ball slightly, which will make it sticky and easier to pill.
In addition, the surface of the ball can be slightly rubbed a few times before pilling to make it easier to tear. Be careful not to rub and pull with too much force to avoid breaking or deforming the ball.
I'm sorry I don't understand, but can you elaborate on that?
If double-sided tape is not available, you can try to use other adhesive materials such as clear glue, velcro, etc. You can also try dipping your fingers in water and gently rubbing the ball several times to wet the surface of the ball slightly, which will make it sticky and easier to pill. In addition, before holding the lead ball, you can first rub the surface of the ball a few times to make it easier to be torn.
Be careful not to rub and pull with too much force to avoid breaking or deforming the ball.
-
Summary. Answer: Kiss hello Double-sided anti-glue is the racket is counter-glue on both sides, there are many people who play like this, single-sided tape is only one side of the racket adhesive leather, generally refers to the Japanese-style straight plate single-sided rubber example:
Koreans Yoo Seung-min, Liu Nam-kui, Kim Taek-so, double-sided positive and negative glue generally refers to forehand anti-glue and backhand anti-glue, for example: Liu Guoliang, double-sided raw anti-glue generally refers to forehand anti-glue and backhand raw glue Example: Wang Tao, Muzi
What does it mean to double sided reverse glue of a table tennis racket.
Answer: Kiss hello Double-sided anti-glue is the racket is anti-glue on both sides, there are many people who play like this, single-sided glue is only one side of the racket adhesive leather, generally refers to the Japanese-style straight plate single-sided rubber example: Korean Yoo Seungmin, Liu Nankui, Kim Taek-so, double-sided positive and negative glue generally refers to the forehand positive glue and backhand anti-glue, for example
Liu Guoliang, double-sided raw anti-glue generally refers to forehand anti-glue backhand raw rubber examples: Wang Tao, Muzi
In table tennis, reverse rubber refers to the rubber with the rubber particles facing down and the surface smooth, which is one of the most commonly used rubbers. It is characterized by strong spin force, stable hitting and easy control, and is suitable for arc circle or arc circle combined with fast attack type play. With a steady shot and good ball control, it is suitable for beginners and is also very common among professional players. 殺殺
You can get the sports store where you can buy rackets and let the master help you glue it, after all, they are more professional (gluing, sticking, cutting)...Self-adhesive sleeve glue process: the general new glue is poured and brushed with 3-5 layers of organic glue (note: after brushing a layer of glue, it is necessary to wait for a layer of glue to dry thoroughly and then brush the next layer, and the organic glue is generally completely dry in 5-10 minutes) Two layers of brushing on the bottom plate can be done. >>>More
A widely used method for amateurs to self-configure quick-drying glue. >>>More
The International Table Tennis Federation's explanation of the serve in the "Table Tennis Competition Rules" 1 At the beginning of the serve, the ball is naturally placed on the palm of the hand that is not holding the clap, and the palm is open and remains stationary. 2 The server shall throw the ball almost vertically upwards with his hands, without spinning the ball, and shall raise the ball by not less than 16 cm after leaving the palm of the non-clapping hand, and the ball shall not touch any object until it is struck out. 3 When the ball descends from the highest point of the toss, the server may hit the ball so that the ball first touches the local table, then passes over or around the net device, and then touches the receiving player's table. >>>More
Ball rubbing is the basic technique of catching the ball with downspin. In order to ensure the stability of the ball, we should pay attention to the following points during the practice: first, use the elbow as the fulcrum to complete the batting action; second, the wrist is relatively fixed; Thirdly, the forearm is placed horizontally in front of the body when the shot is directed backwards (Fig. 5). Fourth, when hitting the ball, rely on the small movement of the wrist forward to strengthen the friction of the ball (Diagram 6-7). >>>More
Now most of the ball machines on the market send out the ball is not very human, are a bit hard, especially the need for manual adjustment, and the larger the leather wheel, the less ball, and we play the same ball, the ball is by friction. This is not possible with large rollers because the contact surface is too large. I don't know what kind of ball machine you play, the skill is easy to promote the ball machine is good Charging portable Intelligent programming Spherical anthropomorphism The key is that the ** is less than 1,000 yuan The landlord can understand it.