How do you look at the household water meter, how do you look at the household water meter?

26 tons, the water meter is divided into digital display, word wheel display, and smart water meter liquid crystal display, respectively, such as the reading, digital such as the first 4 digits for the black font should be an integer digit, the last 1 digit for the red font should be a decimal place, for example 00012, 2 for the red font, the other for the black font, the reading for tons. There is also a black font, with a red pointer underneath, pointing to 2, and the reading is a ton. The word wheel has equal black hands, and there are red hands.

The reading is to read the previous pointer to see the next pointer, the next pointer after 5 to read the first pointer, but 5 to push back one pointer. Example 1: 1 8 7 5 6 The reading is:

T Example 2: 1 9 7 4 3 The reading is: t The LCD is 6 digits with a decimal point before the last digit.

The first five digits are integers, and the last digit is a decimal place. Example: Yes tons.

My house is digital and beautiful.

1. The black word wheel represents the integer part, and the red word wheel represents the decimal number; 2. The reading of the pointer part represents the fourth digit after the decimal point; 3. The rotation direction of the word wheel is from top to bottom, and the rotation direction of the pointer is from left to right.

Extended Materials. Water Meter Reading:

The mechanical water meter used by the residents is generally marked by 8 pointers on the dial. As shown in Figure 1, the four red pointers on the right are all less than 1 cubic meter, because the unit of measurement of tap water is "cubic meter", these plates generally do not have practical guiding significance, and can not be read.

The four black hands on the left indicate the values of the dial 1, 10 ......It is the basis for the metering and charging of tap water, and the reader should learn to read it and then recognize the pointer.

The first thing to do is to understand the units of the four black pointers and their carrying relationships.

The four black pointers in Figure 1 are counterclockwise from top to bottom, in order of one digit (1), ten digit (10), 100 (100), and 1000 (1000). The pointer of 1 turns a circle, and the pointer of 10 goes a word; The pointer of 10 turns a circle, and the pointer of 100 goes a word; The 100 pointer turns in a circle, and the 1000 pointer goes one word.

Reading essentials: When reading the water meter, it is necessary to read it from the high pointer to the low position, that is, from the 1000 pointer value plate clockwise from bottom to top in turn. Special attention is required:

If the thousand, hundred, and ten pointers are between two digits, pay attention to the association between the upper and lower adjacent pointers.

As shown in Figure 2, the ten-digit pointer of "10" is between 8 and 9, very close to 9, and whether it should read 8 or 9 depends on whether the single-digit dial pointer of 1 is to 0. We see that the single-digit pointer is between 0 and 9, i.e. there is no carry yet, so the ten-digit pointer should read 8, not 9.

If the single-digit pointer also points between two numbers, it is necessary to see whether the pointer of the red dial next to it is over "5", and the method of rounding 5 is taken to determine whether the single-digit pointer is carried or not. As shown in Figure 3, the dial pointer does not have "5", and the unit pointer is between 0 and 9, at this time it should not be carried forward, and the unit should be read "9".

This is an electronic water meter is very easy, the above unit is cubic meters, the value is cubic meters, and the density of water is 10 kilograms of cubic meters, so it is already used tons of water.

This is an electronic digital display water meter.

Five integer digits. The current displayed value is: 00111

Four decimal places. The current displayed value is: .2881

The current meter measurement value is: cubic meters).

Subtract the last meter reading to see the amount of water used during the period.

At that moment, dozens of guests arrived one after another, and three people wearing square scarves and a Taoist priest came behind, and they walked in, and everyone didn't recognize them. One of them wore a square scarf and said, "That is Mr. Ji Tianyi?"

Ji Tianyi said: "The little brother is." What do you have to say, sir?

The man took out a letter from his sleeve and said, "Brother Ji Wei is very respectful." Ji Tianyi continued, opened it with Xiao Jinxuan and Zhuge Tianshen, and realized that it was Xin Dongzhi, Jin Yu Liu, Guo Tiebi, and Lai Xiashi, and said:

Have a seat. "When the four of them saw that something was going on here, they were going to take their leave. The monk palace pulled him and said:

Four came from afar.

Summary. After the above steps, we finally came up with the number of water meters to be 768 tons.

1. The common combination of word wheel and pointer displays the reading. Read the black word wheel reading: 10,000 is bit:

0 thousand: crack early shed 000: 0 ten:

0 digits: 1 (close to 1 here, solid and counted as 1) read the red pointer part: the reading of the red pointer is used for factory inspection, do not care.

Take black pointer readings: 1000 (1000): 2 hundred (100): 2 tens (10): 6 (1): 1

Let me take a screenshot and show you.

How to remember the water meter of the rental house.

It is recommended to take a ** and see how much it has changed every month, which is basically this kind of water meter.

After the above steps, we finally came up with the number of water meters to be 768 tons.

Now in the intelligent life, many people don't know how to look at household water meters.

All kinds of water meters. 01 The way the water meter displays the reading is generally that the water meter displays the reading through the combination of the black word wheel and the red pointer. The reading shows that the structure is generally composed of a black word wheel and a red word wheel.

The black word wheel generally displays integer digits, and we only read the numbers on the word wheel. The readings on the red hands are used for inspection when the meter leaves the factory. The reading of the red pointer is for factory inspection, so you don't have to care.

02 Pure pointer display.

The meter reading below shows "2,262 cubic meters," or 2,262 tons. The reading of the red pointer is used for factory inspection, and we don't have to care.

03 The way the word wheel and the pointer are combined.

The black word wheel in the picture below shows "00003 cubic meters", which is 3 tons. In the same way, the reading of the red pointer is used for inspection at the factory, and we don't have to care.

04 The last digit or digits in the word wheel are red, and like the red pointers, we can ignore them.

The black word wheel in the picture below shows "0038 cubic meters", which is 38 tons. The reading of the red word wheel and red pointer on the water meter is used for inspection at the factory, and we don't have to care.

Here's how to check your household water meter:

Tool Material: Water meter.

1. Look at the number of word wheels, the word wheel generally represents an integer number, from right to left respectively represents one, ten, hundred, thousand, thousand, if the current number of the water meter is displayed on 100 (3), 10 (2), 1 (6), then it represents the current use of 326 tons of water.

2. Look at the four red pointers, the red pointers represent decimal places, and there are corresponding icons next to each pointer, which represent the tenths, percentiles, thousands, and tens of thousands. The key to looking at the water meter is to read it every time.

3. Add integer digits and decimal places, and add integer digits and decimal places to get the final reading.

Considerations for Viewing Water Meters:

In the household water meter, there is usually a round thing with a gear and a red triangular arrow, and if the red triangular arrow rotates very quickly, it means that the water flows out very quickly. If all the faucets in the home have been turned off, but the arrow is still turning, then it means that the water pipes in the home are leaking.

In the household water meter, there are generally 3 clock structures with red hands, which are marked separately, which are used to allow the owner to more accurately read the water consumption of less than one cubic meter, but most people only look at the numbers in the box when they look at the water meter, which generally do not need to be paid attention to.