Drawer slide size and specifications, drawer slide thickness size

The slide rail of the drawer is fixed on a certain track for the movement of other moving parts of the drawer, with a groove or curved guide rail.

The sizes of drawer slides are generally available on the market: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches. You can install different sizes of slide rails according to the size of their respective drawer models.

1. Assemble the five plates of the drawer first, screw the screws, and the drawer panel has a card slot, and there are two small holes in the middle for installing the handle.

2. To install the drawer slide rail, you first need to disassemble the track, the narrow one is installed on the drawer side plate, and the wide one is installed on the cabinet body. Everyone should distinguish between the front and the back.

3. Install the cabinet. First, screw the white plastic holes in the side panels of the cabinet, and then install the wide rails removed from above, and fix one slide rail with two small screws one in front of the other. Both sides of the cabinet should be installed and secured.

Summary. The size is about 200 cm.

The size is about 200 cm.

1.First of all, determine the drawer clearance, according to the product drawing of the three-section slide rail or measure the actual thickness of the slide rail. Under normal circumstances, the thickness of the material of the ordinary three-section slide rail is about plus or minus, at this time, we recommend leaving a gap of 13mm on one side of the drawer to ensure the smooth sliding of the slide rail.

2.To confirm the screw mounting holes on the drawer and the side panel of the cabinet, determine the screw hole position according to the middle rail given by the manufacturer's drawings of the three-section slide rail you purchased, set the screw mounting hole position of the middle rail with the side plate of the cabinet, and set the screw installation hole position of the inner rail with the drawer side panel. 3.

After the above steps are completed, then align the end of the inner rail on the side panel of the drawer with the end of the middle rail, and then gently push it inside, you will hear a sound of card, indicating that the middle rail and the inner rail part have been linked, and the drawer can be pushed and pulled freely. I hope I can help you.

The size of the drawer slide is mainly 10 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches and so on.

There are many sizes of drawer slides on the market, in order to ensure that there are no problems in subsequent installation, you need to measure the size of the drawer in advance, and then choose a slide rail with the matching size. When installing drawer slides, the first thing to consider is the size and size of the slides. Because drawers can be large and small, the size and size of the slide rails are very important.

Drawer slides are typically between 10 and 24 inches in size.

Before installing the drawer slide rail, you must understand the installation steps of the drawer slide rail and follow the installation diagram of the drawer slide rail. When installing, pay attention to the installation position of the two slide rails. Narrow slides are mounted on the drawer side panels and wide slides are mounted on the cabinets.

After installing the drawer slide rail, slowly push the balance drawer parallel to the bottom of the box, and check whether the two sides are balanced in the process.

Drawer slides

Hardware connection parts fixed on the cabinet body of furniture, for the drawers or cabinet boards of furniture to enter and exit the movable hardware connection parts, slide rails are suitable for cabinets, furniture, briefcases, bathroom cabinets and other wooden and steel drawers and other furniture drawer connections. At present, there are steel ball slides, silicon wheel slides, and gear slides on the market. Through the rolling of the steel ball, the steel ball slide automatically excludes the dust and dirt on the slide rail, so as to ensure the cleanliness of the slide rail, and will not affect its sliding function due to dirt entering the interior.

Drawer slide size specification table: 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches.

There are many sizes of drawer slides on the market, in order to ensure that there are no problems in the follow-up installation, you need to measure the size of the drawer in advance, and then choose the slide rail with the size matching.

Slide rail, also known as guide rail and slide, refers to the hardware connection parts that are fixed on the cabinet body of furniture and are used for the drawers or cabinet boards of furniture to enter and exit the activity. Slide rails are suitable for drawing connections between wooden and steel drawers such as cabinets, furniture, briefcases, bathroom cabinets, etc.

The commonly used drawer slides are three-section rails.

The three-section slide rail is composed of an inner rail (active rail), a middle rail, and an outer rail (fixed rail). The length of the two-section slide rail is generally about 3 4 of the drawer (except for the double-layer two-section steel ball slide rail), and the filial piety three-section slide rail can pull out the entire drawer, because the three-section slide rail can be fully pulled out of the drawer, which is more convenient than the two-section slide rail in terms of use. The ball is evenly stressed, the push and pull are smooth, and the silence is cushioned.

The slide rail can not be seen on the side, all pulled out, and the length is 550mm. Installation clearance 5mm. The drawer box must be made in accordance with the size requirements of the slide rail, the maximum side plate of the drawer box is 16mm, the bottom is reserved for 12-15mm space than the sampling test, the minimum distance from the bottom plate is 28mm, and the nominal length of the drawer slide rail is -10mm, and the professional requirements for installation are also very high.

Summary. Pro, the specifications of the drawer slide rail are generally 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches, etc.

Pro, the specifications of the drawer slide rail are generally 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches, etc.

3.Drawer slides are generally 250 500 mm, 10 20 inches of rental wax, 6 8 inches, can be selected as needed. It can be directly installed on the side panel of the CRO, or inserted into the slot of the side panel of the drawer, with a height of 17 27 mm and specifications of 250 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm, etc.

The sliding guide rail is a hardware accessory installed in the furniture cabinet and used for the drawer or cabinet board entry and exit activities of the home empty argument tool. There are spherical guide rails, spherical guide rails and silicon wheel bucket shortage guide rails on the market. The ability of large and small drawers to slide freely and bear weight depends on the support of the slide rails.

The material, principle, structure, and process of the drawer slide are different, and the slide rail has low resistance, long service life and smooth drawer.

Summary. The specifications of drawer slides are generally 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches, etc.

Drawer slides have bottom-supporting type, steel ball type, roller type, etc., which should also be selected according to the actual situation when purchasing.

There are different sizes of drawer rails sold on the market, and we have to choose the right guide rail according to the size of the drawer.

Drawer slides are generally 250 500mm.

What is the typical size of a drawer slide?

Hello, I am Fan Que Ask's co-teacher Tianyu Culture Media Emotional Assistant No. 003, <>

We have been in this industry for 8 years and are happy to serve you. <>

Please wait for 2 minutes <> answer

The specifications of drawer slides are generally 10 inches, 12 inches, 14 inches, 16 inches, 18 inches, 20 inches, 22 inches, 24 inches, etc. The drawer slide has a bottom laughing type, steel ball type, roller type, etc., which should also be selected according to the actual situation when purchasing. The drawer rails sold on the market have different bumper sizes, and we have to choose the right guide rail according to the size of the drawer.

Drawer slides are generally 250 500mm.