What kind of hub should I buy if I have two computers in my home?

1.First of all, you need to distinguish what kind of network you are on, and then decide whether to buy a router or a hub

2.If it is a cell broadband, the bandwidth is 1m, the speed is 30-300k s, each user corresponds to one, can not be divided, the cell routing will be set, the cost is 120 yuan per month, so you can only apply for an account, with the increase of users can reduce the charge, you can use the route or hub.

3 If you go to ADSL, the bandwidth is 512k, the speed is 30ks, you can shunt, and the shunt is 30ks (no more than 512k), you can use router and hub, and the cost is 120 yuan s. It costs 300-500 yuan a month to install ADSL (part of which is deposited into the Internet account), which is recommended for long-term users.

4.For general household routers within 100 yuan, hubs about 40 yuan are fine. D-link and TP-link are acceptable.

4-port hub, about 40 yuan.

If you want to share the internet, you need a router.

Buy a broadband router.

d-link

tp-link

Alpha. Either way.

The two computers don't need a hub at all, just connect them directly. If you want to surf the Internet together, it's OK to install two network cards on one and share them

Two computers can be connected directly. First, build a network connection, and set the network card IP: and mask in the host to connect to the passenger plane

Gateway:,DNS:,NIC IP::

Mask:,Gateway:,DNS:

Auto-fetching is also possible. If you want to share the Internet, enable the Internet sharing of the network card of the host connection modem (NIC connection - Properties - Advanced). The premise is that the network does not restrict the sharing of the Internet.

Note: The network cable connecting the host and passenger aircraft is a crossover cable.

For file sharing, you need to add the NWLINK IPX protocol and file and printer sharing to the two NICs connected to the computer. When you're done, you can set up sharing in the file's right-click menu.

If a single computer is currently using PPPOE to access the Internet, you will need a router, or add a network card. The hub is useless.

Generally speaking, you don't need to set it up, just power it on, and connect the network cable to the two machines separately.

If you have a router, like this. ,The network cable that comes out of the cat,Connected to the WAN port,Computer A to 1,Computer B to 2,Just pull it。 Set up the router, how to set it up should have a manual, or check it on the Internet is very simple.

Any computer that opens and shares the network card and sets the IP address.

The other computer gateway is set to share the IP of the network card.

Then turn on the shared machine, dial-up the Internet, and then the other computer can access the Internet.

You have the router. Just 2 computers can do without a hub. Direct access to the route will do.

It's okay.,As long as the hardware is connected,Each computer can dial-up Internet access at the same time.,Or add a router.,The kind with cat function.,Then add the account password to it.,Connect to the computer and you can use it.。

First of all, answer your question: there is a ** software called homeshare can achieve the function you want, as long as this software is installed on both computers, Chinese software, the setup is also very simple.

It is still recommended that you buy a router, which can be done for a few tens of yuan cheaper, making the network connection simpler and more stable. In addition, the hub only has a 10M bandwidth, and the signal transmission is in the form of broadcasting, so I won't say much about the drawbacks. The hub can be used as an antique collection, so let it rest.

IP address set to the same network segment A set B set to between Gateway Subnet Mask All Netbeui protocols must be installed (2000 and 98 below) This protocol is Microsoft's protocol Intra-Neighbor right-click Properties Add protocol. Fainted, the landlord spoke loudly and panted! If you have a broadband modem, you can't set it up like this if you want to share the Internet, you can set up a host as an Internet server -- first connect the broadband cat with the hub Install 2 network cards on a computer as a host A network card connects to the hub B network card connects to the shared Internet computer Method 1:

You can use the built-in sharing method of Windows XP. 2: Yes"Network and dial-up connections", select your dial-up connection icon and look at the properties inside.

Then select Share and you're good to go. If you select Share, the IP address of the other NIC will change to in general. 3:

Then you can set the IP address of your other computer to 4: when the other computer wants to access the Internet, the dual NIC computer must already be online. - There is also a router to buy a router tp-link or Huawei's can be more than 100 yuan to set up the method, and then hand it over to you when you get it, hehe Baidu to find it.

** Cable - ADSL Moden (Broadband Cat) - Network Cable - Switch - Then lead out two network cables from the switch port and connect them to the computer.

Here it is recommended that you switch instead of a hub (this is rarely used). Follow the above connection methods, and pay attention to the IP address settings of the computer network. Try.

Let's start with the local area network.

Both machines, both connected to the hub.

I want two computers to be able to access each other.

Let's talk about the Internet.

What access method does the landlord use?

The method of connection sharing is also different.

You can check the connection of the terminal base and crystal head of the network cable

There are two ways to cross the network cable, one is the cross line, and the other is the practice of crossing the line: one end uses the 568A standard, and the other end uses the 568B standard parallel line

568a standard: green and white, green, orange white, blue, blue and white, orange, brown and white, brown and brown 568b standard: orange white, orange, green and white, blue, blue and white, green, brown and white, brown You can pay attention to the difference between the two practices is that orange and green are exchanged.

If the two parties to the connection are not equal, use parallel wires, such as a computer connected to a router or switch.

Use crosswires if the two connected devices are equal, such as a PC to a PC.

With a router. Best. Forget it.

with hubYou need to build a host. The host requires 2 NICs. One in and one out. Meantime. If the main machine is turned off, the extension will not be able to get on.

It's still best to use a router. The router will take care of dialing up, so you can connect two computers separately and you can get on. You use this book, it is recommended to have a wireless router.

The hub is the hub.

If you want to go online, you need to have a router. Two of the ports of the hub are connected to two computers, and the hub --- the router are connected with a straight cable (plugged into the LAN port of the router). Then connect the network cable of the external network to the network port (WAN port) of the router.

Then you can set the dial-up on the management interface of the router.

If you want two computers to use a network line to access the Internet at the same time, you must have a router, and the home routers sold on the market now generally have 4 network cable sockets, and the hub will not be used. Connect the two computers to the LAN port of the router with network cables, and then connect the network port of the broadband modem to the WAN port of the router with a network cable, and set the router accordingly.

First of all, it is necessary to know whether your ADSL belt has a routing function, which can generally be found in the ADSL manual or on the Internet.

If your ADSL cat with routing function, OK, easy to do, just set the IP address of your computer to the same network segment as the IP address of ADSL (in the manual, or check on the Internet), open IE and enter the IP address of ADSL, set it up, after ADSL dial-up, your computer can already access the Internet.

If your ADSL doesn't have a routing feature, that's okay, a little more troublesome. The method is to make a server on a computer, install dial-up software on the server to surf the Internet, and install a proxy, ** software such as ccproxy. After installation, it has been turned on, and the other machine needs to set up the server to do it.

IE settings are set on the Tools option Connection, and there is a connection setting when QQ logs in. If you think it's troublesome, replace the hub with a router.

First of all, you used the broadband of the second-tier telecom company, and then you did not understand the purpose of the hub.

The name of the hub is the hub, and the easiest way to use it is to set up a small local area network, which must have a host, and other computers can get in touch with the host through the hub to obtain the qualification to access the Internet; The biggest disadvantage is the shared bandwidth, for example, if you are 10M broadband and connected to a 5-port hub, the bandwidth of each interface is only 2M;

So now it is recommended that you buy a router first, its function is larger than the hub, and then if there is a demand, you can buy another switch, he just makes up for the shortcomings of shared bandwidth, 10m broadband is connected to the 5-port router, each interface has 10m (theoretically).