How can disc burning be fast, how many times the speed is used to burn discs?

The burning speed mainly depends on two aspects, one is the nominal speed of the disc, and the other is the maximum burning speed supported by the optical drive.

Burning speed, such as 2x, 4x, 6x, 8x, 10x, 12x, 16x, 24x, 32x, 40x, etc. Refers to the engraving speed at which the disc is burned. Usually the maximum speed of burning *** discs is 16x.

The higher the speed value, the more time is saved.

If you use 16x to burn, on the one hand, your burning drive supports 16x burning, which can be achieved by a general recorder.

Then the important thing is the *** disc you choose, if you burn in this high-speed mode, you are required to buy the disc must be of good quality, do not buy cheap and poor quality, otherwise under high-speed burning, if the disc quality problem leads to burning failure, it will affect the overall time. If you are not sure if it is bad when buying, you can buy a few fewer plates to try, and if the quality is good, buy more.

This is related to the performance of the machine and the drive, you can't adjust it to the speed you want, you can only adjust it to the speed that the machine and the optical drive can accept. If not a lot of records. It usually doesn't take a lot of time to engrave a few plates.

You just need to choose the speed according to the speed of your optical drive. It's all written on the CD-ROM drive. For example, 24x Ahh

16x or something.

The computer configuration is quite high, the quality of the disc is quite good, and the optical drive is quite powerful,。。

Since software engraving is an automatic process, the only way to find out is this.

Burning discs are done at 16x speed. The highest burning speed that can be achieved by the *** disc burner in the market is 16 times the speed, and for the burning speed of 2 4 times the speed, the amount of data transferred per second is, and it takes about 15 to 27 minutes to burn a *** disc.

Burning at 8x speed takes only 7 to 8 minutes, which is only a little slower than burning a CD-R, but considering the amount of data it burns, the 8x speed is very high. Burning speed is the primary factor in buying a high-speed disc burner, if you have sufficient funds, choose a high-speed disc burner as much as possible.

This copy should be treated on a case-by-case basis. If in terms of the quality and efficiency of burning, the burning speed of the *** disc is generally 8 times, and the dao CD disk is 24 times.

In addition, the disc records data in points, and the lower the multiple of burning, the clearer and more uniform the data points, especially ***. You can compare an 8x burned *** with a 4x burned ***, look at the side of the disc data in full light, 4x burned must be clearer and more uniform than 8x burned, and its stability, security, and burning quality are also better than 8x. For 16x burned *** disks, it will be very difficult to read the disc drive, and the old disc drive will not even be able to read the disk.

The disadvantage of low-speed burning is that it takes a long time and the recorder ages quickly. However, today's burners are generally cheaper, so it is recommended to burn with 4x.

As for burning CDs, the difference between high speed and low speed is not very obvious, because the points used for recording data on CDs are larger, generally 16x or 24x.

Generally, you choose the right speed, choose different speeds according to different discs, but the general burning software will automatically select the speed

On the disc, it is generally written that the appropriate speed is generally selected, and 8x can be selected.

There are options inside when burning, and you can use it at maximum speed.