Regarding the question of broadband connection speed, why does the connection drop when you connect

You are choosing the working mode of the network card, the general network card supports 10M full half-duplex and 100M full half-duplex, in fact, this has nothing to do with the network speed of the home network, unless your broadband is more than 10M, you need to choose 100M full duplex. 1M broadband standard ** speed is about 128kb s, due to different local conditions The standard network speed will also be different, some areas are higher than 128kb s and some areas are lower, you say that your classmate** speed 250k should be 2m broadband, 2m broadband standard speed is 256kb s, it is recommended not to mess with the network card settings, the only way to get faster is to increase the bandwidth! If your broadband is always much lower than the normal standard, you can contact the local Tietong technician to help debug.

Tietong ADSL has this problem. You have to go down to 10m to communicate properly. It is very unstable to work at 100m.

It is recommended to notify the maintenance personnel of the broadband operator to come to the door to solve the problem.

This problem is caused by the setting of the optical fiber equipment, not the instability of the broadband network line, and the problem can only be solved by resetting the broadband network connection by broadband maintenance personnel.

What is the reason why 100m broadband speed is slow 100m broadband speed is very slow. When we raise the network by 100m, we find that the network is not much faster than we imagined, what is going on?

Tools Materials.

Broadband. Computer. How it works:

Internet speed sharing: When handling broadband business now, most of the cases are that the 100m is for the use of people in a building, not for a household, so everyone should ask clearly how many households are using this kind of broadband.

Network card limitations: Computers generally limit our network speed, you can click: Local connection - speed and duplex - 100Mbps full duplex to set.

Route scrambler problem: When broadband passes through the router, there will be a process of network speed dropping, but the degree of the king drops is different, I am hungry You can check if there is something wrong with the router by testing the router's network speed.

Wireless signal: The wireless network itself has the characteristics of low speed with the network, and when you test, you must measure the speed at the broadband of the incoming line, so that you can accurately measure the specific value.

Different operators: Generally speaking, Southern Telecom broadband is better, Northern Netcom broadband is better, operators are different, network speed is also different, you can refer to it when choosing a wide and slow state belt operator.

Hello! The average speed of 100m broadband** is about 10m s. **Slowness is caused by a variety of factors, personal network stability is on the one hand, on the other hand, it is also necessary to consider whether the address of your **target file** is registered on a stable cloud server, if the target address cloud server is poor, no matter how fast your network speed is, it is also **slow, thank you.

Slow broadband internet speeds can be caused by several common causes:

1. If the bandwidth of the ** server is narrow or the server is busy, you can try to change the time period to access or access other** to determine whether this problem is caused;

2. Computer reasons such as low computer configuration or weak system processing power;

4. The use of routers to share the Internet leads to slow network speed;

5. If the modem device is unstable, it is recommended that you replace the modem device for testing;

6. Line reasons (such as long line, noisy line, poor quality of the entrance line, change of the user-side line, etc.).

If this is not the case, you can contact the local customer service for feedback.

Broadband Internet access often drops, and sometimes the computer restarts. After using it for a period of time, the connection will be dropped.

Resolution. 1.First, check whether there are multiple computers surfing the Internet at the same time, or whether the current computer is performing P2P** or **** operations that occupy more network bandwidth, which may cause the amount of broadband data to be too large and affect the stability. If this is the case, please turn off some software and disconnect some networked devices to reduce bandwidth usage testing.

2.If there are other network cables, connect them to other network cables for testing. The weak anti-interference ability is not good, and the network cable has an impact on the stability of the network, and the network cable can be replaced.

3.If there are other computers around, test whether there is a broadband disconnection situation on other computers, if other computers are also disconnected, please contact your local Internet Service Provider (ISP) to verify whether it is caused by network interference or network instability, and ask your broadband operator to assist in dealing with it; If other computers are normal, it is not excluded that the network card driver, system reasons, viruses and Trojan interference of the computer are related to factors such as network card drivers, system reasons, viruses and Trojan horse interference, and it is not excluded that it is related to the compatibility of network equipment.

The local connection cable is unplugged, which refers to the connection between the cat and the network card, and this problem occurs for the following reasons:

1.The cat is broken.

2.The network cable connected to the cat and the network card is not in good contact.

3.Problems with the network card port.

4.The voltage instability causes the cat to restart frequently and cause the connection to drop.

From your situation, scenario 4 is the most likely. The solution is to add a voltage regulator, otherwise it will be automatically good only when the summer is over and the weather is cool and the power consumption is not large.

The local connection is not good, that is, the hardware is not connected well, and it is estimated that the crystal head on the cat is loose

As for logging in from the client again, it won't work.,You have to restart the cat.,It's estimated that there's a problem with the cat itself, and it's OK to call him to change it! And it doesn't cost anything! ~

If it is a telecom, it is recommended that you call the 10000 customer service to call someone for maintenance, this should be a line problem!