win10 automatic configuration update, after booting, can t enter the system, what should I do if the

1. Win10 boot black screen can't enter the desktop 1, turn on and enter the system for a long time press the power button to turn off, repeat about 3 times;

2. In this way, the interface of advanced recovery should appear after booting;

3. Click on the "Troubleshoot" option, then click on "Advanced Options", click on "Startup Settings", click on "Restart", and select the installation mode.

4. After entering the safe mode, if you have installed anything before the black screen, you can uninstall and delete the software in the safe mode, if you are not sure, you can do a clean boot, and the operation steps of the clean boot are as follows:

Press "win+r" to open the "Run" window, enter the msconfig command and press enter, and the system configuration dialog box will pop up.

2) Switch to the "General" tab, click "Selective Startup", and then click Clear the tick above "Load Startup Items".

Switch to the Services tab, click Hide all Microsoft services, and then click Disable All.

Switch to the "Startup" tab, click "Open Task Manager", tap Startup Items, and then click Disable.

After clicking OK to save, reboot the system.

Second, win10 boot black screen for a long time.

1.Right-click the win key and select "Power Options".

2.Tap "Select the function of the power button" on the right, click "Change settings that are not currently available".

3.Uncheck "Enable Fast Startup".

3. Win10 boots up black screen only mouse.

1.Hold down Ctrl+Alt+Delete to bring up Task Manager;

2.A new process created in Task Manager.

Three solutions to the inability to enter the system after Windows 10 system update.

Method 1: Revert to a previous version.

Steps: When the computer is turned on, when entering the password input interface, press the shift key on the keyboard, click the power button in the lower right corner of the mouse, click [Restart] in the open options menu, and the computer enters the system menu interface of [Select an option];

If you can't enter the login password interface when you boot up, you can press and hold the [Power] button on the computer to force it to shut down, and then press the [Restart] button to turn it on.

In the Advanced Options window, we click on "Revert to Previous Version";

Then open the [Revert to Previous Version] window, we click: Revert to Previous Version;

Restoring a previous version of Windows....Longer, wait;

After we restore the system to the previous version, the system enters the login interface, enters the password, and you can enter the system desktop.

Method 2: Enter safe mode, start [Diagnostic Startup], and restore the system.

After entering the advanced options interface, click [Startup Settings] (change the Windows startup behavior);

In the startup settings window that opens, we click [Restart];

After the computer restarts, enter the startup settings window and press the number "4" key on the keyboard to enter [Safe Mode];

Long press the power button to power off.

Press the power button to power on.

Repeat steps 1 2 three times.

Confirm if the "Repair" interface appears on the screen, and if so, click on "Advanced Repair Options".

Click on "Troubleshoot", click on "Advanced Options", click on "Startup Settings", click on "Restart".

After the system restarts, press the number 4 corresponding to "Safe Mode" to enter Safe Mode.

Restart the computer and press the shortcut key during the boot process to enter the BIOS interface. In the BIOS settings, select the advanced options for the CPU settings. Under the Advanced option, there is a settings option that contains the word IDE called IDE Con Figuration, find and click on it.

Go to the IDE Con Figuration sub-option, select SATA Mode, and then select IDE Mode from the pop-up options. After the modification, press F10 to save and exit. Restart your computer and reinstall it as you normally would, and you'll find that the installation was successful.

What version of the system are you installing?,Windows10 system,It is not recommended that you install it with the ghost version,It is recommended that you still use the installed version of the CD or image to install it.,Similar problems may occur with the ghost version of the image installation.。

If the computer boots up black, you can remove all components except the CPU, graphics card, and memory module, and then power on the computer. If there is a fault in the memory, there should be an alarm sound. If it is not due to memory, please change to a normal CPU and re-test it when you boot it.

If the black screen still appears, you can only change the motherboard, and the problem should also appear on the motherboard.

Many friends have encountered win10 after the update, the phenomenon of black screen on boot, what is going on? How to solve it? Today brings a detailed solution, let's take a look at it below.

Win10 system update: How to solve the black screen when booting.

Method 1: 1. First of all, when the user boots into the system, press and hold the power button to turn off the power, repeat about 3 times, and the advanced recovery interface will appear after powering on.

2. Then, click Troubleshooter - Advanced Options - Startup Settings - Restart, and select the installation mode.

3. Next, after the computer enters safe mode, the operation steps for clean boot are as follows:

4. Press "Win+R" to open the "Run" window, enter msconfig and press enter, and the system configuration dialog box will pop up.

5. In the "General" tab, click "Selective Startup" and clear the check box above "Load Startup Items". In the Services tab, click Hide all Microsoft services, and then click Disable all.

6. Finally, switch to the "Startup" tab and click to open Task Manager - Startup Items - Disable. Once you've decided to save it, reboot the system.

Method 2: If you can't solve the problem after trying various methods, you can use the reinstall system.

win10 black screen blue screen solution:

Solution 1: Enter safe mode and disable the discrete graphics card driver.

1.Long press the power button to power off.

2.Press the power button to power on.

3.Repeat steps 1 2 three times.

4.Confirm if the "Repair" interface appears on the screen, and if so, click on "Advanced Repair Options".

5.Click on "Troubleshoot", click on "Advanced Options", click on "Startup Settings", click on "Restart".

6.After the system restarts, press the number 4 corresponding to "Safe Mode" to enter Safe Mode.

7.After entering the safe mode, press the win logo key + x and click "Device Manager";

8."Display Adapter", right-click on the discrete graphics card AMD or NVIDIA and select Disable;

9.Restart your computer;

10.If that still doesn't solve the problem, force a shutdown three times at startup to enter WinRe, select the Advanced Boot option, and boot to low-resolution mode.

Solution 2: Prohibit online banking drivers.

In safe mode, try to see if there are any drivers under C: Windows System32 Drivers. If you have changed the program, rename the driver and restart your computer.

This driver is a keyboard saver for online banking assistant, which is commonly found in Shanghai Pudong Development Bank, Shenzhen Agricultural Bank, Bank of China, China CITIC Bank, and Minsheng Bank.

Solution 3: Enter the motherboard BIOS and turn off the secure boot.

Restart the computer and enter the BIOS;

How to enter the BIOS: After restarting the computer, you can enter by pressing the "DEL" key in the lower right corner of the keyboard, and the "F2" key is generally used in notebooks (if the F2 key cannot be entered, you can consult the manufacturer how to enter the BIOS).

After entering the BIOS, it is generally shown in the following figure:

Find the Secure Boot option, and close it.

Press the up, down, left and right keys on the keyboard to select each navigation folder, and generally you can find the SecureBoot option in the "Security" navigation folder, as shown in the following figure.

The "enabled" at the back means that SecureBoot is enabled, we press the keyboard down key to jump to this option, and press the enter key to pop up as shown below:

Then press the up and down keys on the keyboard, check "disabled", which means disable SecureBoot, press the enter key after selection, then press the "F10" key and press the enter key to confirm to save the BIOS configuration.

After that, you need to restart your computer.

When we use the win10 operating system, if we encounter a situation where the computer can't be turned on after the system update, and the computer has a black screen, don't worry, we can try to restart the computer to see if it can be turned on. Or check the hardware of your computer to see if it's the hardware. Or maybe it's the reason why the driver and system are compatible.

Let's take a look at how to do it

What to do if the black screen won't turn on after Windows 10 update.

Method 1:

1. First of all, if your system has a restore point, you can go directly to itwinre environment,Do a system restore.

2. There are many ways to enter the winre environment, and since you can't enter the system, we need to force it in.

When the computer is turned off, click on the computer, and wait for the Windows logo to appear, and then againPress and hold the power button to force it to shut down. Repeat this 3 times until you get the prompt "Preparing for automatic repair".

3. The system will diagnose your computer, and then an automatic recovery interface will appear, let's clickAdvanced Options,Select againTroubleshooting"., and then select "Advanced Options", and you're in.

4. In this interface, we can see that there is an option of "System Restore", if your system has a restore point, use this function to recover.

5. If your system does not have a restore point, you can click itStartup Settings,Select EnterSafe Mode.

6. Finally, in the safe jujube sleepy mode, uninstall the one that has problems after installationJust update the patch.

Method 2:

1.If you can't solve the problem after trying various methods, you can use the reinstall system.

The first step is to prepare

2. The computer can be connected to the network and can be started normally.

3. Turn off the security anti-virus software on the computer, because the settings to the system may be changed and blocked.

Step 2: Start the installation

2. Feifei one-click reinstallation tool will automatically detect your computer environment to confirm whether it can support the installation of the systemNext step

3. This step is to help users back up computer data, and if you don't need to back up the rock source, uncheck the next step, and click if you need toBack up now, the backup is completed automatically to the next step.

4、This step is the system selection interface,We can choose 32-bit or 64-bit win10 system to install,After you choose,Click[Installation System].

PS: Please allow the firewall to pop up.

1. After booting up, only the mouse appears but no image appears, which is usually due to the damage of the explorer explorer. However, the computer in this case is not really a black screen, which means that the current computer is operating normally and can be operated at the same time. 2. The incompatibility of the computer driver will also lead to a black screen on the computer, so if it is just transferred to the driver or just upgraded the driver, the black screen will appear, in this case, it should be because the driver and the computer are not compatible.

Suggested workaround:

You can restart the computer, open the BIOS, open the BIOS method: after restarting the computer, keep pressing the F2 key, if you press this key and can't open the BLOS, you can ask the after-sales personnel. After opening BLSO, find the Secure Boot option and turn it off.

Press the keyboard up and down left and right keys to open each navigation folder, usually in the "security" navigation folder you can find the secureboot option, after opening this option there is an enabled on behalf of secureboot is in the running state, at this time press the keyboard down key to go to this option, and then press the keyboard down key to click disabled so that you can close the secureboot after the selection press enter, Then press the F10 key and press the enter key to confirm that the BIOS configuration is saved. After all the operations are completed, you can restart the computer to solve the situation that the black screen does not respond after the win10 update.