Why sometimes the inside of the watch recalls fog .

A small amount of water or water vapor enters your watch, and when the temperature is high, the water is gaseous, and when the outside temperature drops, the glass on the surface of your hand is at a low temperature and the water vapor liquefies into small droplets.

Fog and clouds are water vapor condensates made up of small droplets or ice crystals floating in the air, except that fog is formed in the near-surface layer of the atmosphere, while clouds are formed in the higher layers of the atmosphere. Since fog is a condensate of water vapor, its cause should be found in the conditions that cause the condensation of water vapour. There are two reasons why water vapour in the atmosphere is saturated

One is due to evaporation, which increases the water vapor in the atmosphere; The other is due to the cooling of the air itself. Cooling is more important for fog. When there are condensation nuclei in the air, condensation occurs when the saturated air continues to increase or smelt.

Fog forms when condensed water droplets reduce horizontal visibility to less than 1 km.

In addition, excessive wind speed and strong disturbances are not conducive to the formation of fog.

Therefore, fog is most likely to form in areas that are conducive to the cooling of the lower layers of the air, if there is sufficient water vapour, mild winds, stable atmospheric stratification, and the presence of a large number of condensation nuclei. There is generally more chance of fog formation in industrial areas and urban centers, where condensation nuclei are abundant.

Fog itself is not poisonous, fog is clouds at low altitudes, and the main component is water vapor. It's just that foggy days are not conducive to the diffusion of pollutants in the air, and the water vapor in the fog is easy to absorb a large number of pollutants, which reduces the air quality and is harmful to the human body after inhalation.

There are also some chemicals that can also produce fog in certain environments, such as "acid mist" when HCL gas meets air, and the vast majority of the fog produced by this situation is toxic.

Small water droplets formed by the liquefaction of water vapor and exothermy

When the water vapor in the watch encounters the cold glass surface, it liquefies into small water droplets and adheres to the mirror surface.

A small amount of water or water vapor enters the watch, and when the temperature is high, the water is gaseous, and when the outside temperature decreases, the glass on the surface of the hand is at a low temperature, and the water vapor liquefies to form small water droplets.

The watch is fogged up in water, what should I do?!This is the reason why many people's watches hang up. There is nothing wrong with it, it is just that the water is fogging.

Watch experts point out that you should never put a beautiful watch in a drawer because of this small problem, it is very worthwhile. The easiest way to deal with this situation is to take the strap to the watch shop. Generally, professional watch shops, in fact, will provide some free watch cleaning and maintenance services.

If the machinery is not damaged, it only takes a few minutes for the watch to be refreshed with water and fogging. Don't be clever enough to bake your watch in a gas oven or come up with strange ways to dry it, as this may compromise the precision parts of the watch movement, but the gains outweigh the losses. The waterproof ring is not a panacea for swimming, bathing, surfing, or watching.

This is because what you are wearing on your hand is not an ordinary watch but a sports diving watch, so you can be so arrogant! However, experts warn you not to be too careless! Although the watch has a waterproof function, especially a special sports watch for water sports or diving, it is a first-class master of waterproofing, but consumers still need to pay attention to the waterproof watch with a waterproof ring, which has its limitations.

The main problem is to pay attention to the service life of the waterproof ring, the waterproof ring is like the tire of a car, there is a certain period of time for an average of two to four years, and the waterproof ring will lose its function. In case you don't pay attention, the watch suddenly gets into the water, and it is quite troublesome to repair. Therefore, don't forget to pay attention to the life of the waterproof ring!

How to avoid fading on the watch, the color on the watch is colorful, and the proper use can keep it fresh for a long time. When wearing this kind of brightly colored watch, you should pay attention to stay away from the high temperature environment, and avoid long-term sun exposure when not wearing, chemicals and oil stains are also killers that destroy the color and even the material, and a large amount of soaking water such as playing in the water, rain, and car wash will also bring adverse effects to the color, and after being soaked in salty sea water and sweat, it is best to wipe it clean immediately.

The inside of the watch will naturally fog up, it is likely that your watch has been flooded, and when the water enters the water, the water vapor in this hot weather spreads, and this water mist will appear.

If the inside of the watch naturally fogs up, it is because water vapor runs in, and after the water goes in, it will condense into water beads when it touches the cold glass, which is the liquefaction phenomenon in physics. Students who have studied physics in junior high school should understand this truth.

The inside of the watch will naturally fog up. You probably misunderstand this situation. If there is water in the watch, it will naturally cause white fog. In general, it does not fog up.

The watch is naturally foggy, that is your watch leakage, the watch will fog up when water enters the watch, this is a water vapor in the watch generated by the fog, so you should send this repair shop to repair the watch.

If there is natural fogging inside the watch, it is also because the seal is not good, and there is moisture when water enters the watch, so once it is heated, water vapor will be formed.

The watch got into the water、

The humidity of the air inside the watch is relatively large

The temperature difference between the watch and the outside world is relatively large.

In the northern winter, especially in the wet and cold environment, the watch is more likely to have this phenomenon.

The reason for the fogging is because there is a lot of moisture in Chaoshan and a large temperature difference between the inside and outside, and then the moisture is cold and there is fog on the glass lens, which should damage the watch and make the components rust.

If the inside of the watch is fogged, then this should be water vapor inside, and the sealing is not very good, so it needs to be repaired.

A natural reaction caused by the difference between body temperature and the temperature of the watch.

It is best to let the watch be in contact with the body for a while before wearing it, and then wear it at a consistent temperature.

The inside of the watch will spontaneously ignite and fog up, indicating that your watch is not tightly closed and is prone to water vapor, so you should go to the store to fix it.

The inside of the watch is naturally foggy, indicating that the sealing of the watch is not good, the moisture in the air enters the inside of the watch, and when it is hot, it will form a fog, which can be sent to the store to let the master help you take a look.

Why does the inside of the watch naturally fog up? The inside of the watch is naturally fogged, it may be that the watch is not well sealed, and it has seeped into water or sweat, so it is necessary to go to the watch store for maintenance.

The reason for the natural fogging in the watch is that water vapor enters the inner realm or the watch is not sealed and inverted.

Maybe you are often in a humid working environment, after hot weather changes, the watch** will be a blurry fog

Why does the inside of the watch naturally fog up? This is due to the fact that there is a broken place in the watch glass.

Because there is a complete problem inside, under normal circumstances, it is impossible to fog up inside the watch, only the water that enters.

This is still the watch's sealing layer is not good enough. There's moisture in it, and you can't pick it up until it's hot.

The seal is not tight, and water vapor enters.

The watch is sold before there is fog, which means that there is moisture in the watch. In general, although the watch is hermetically sealed, there are very small pores in the joints of the case, especially in used watches. When washing hands or washing clothes or on rainy days, water can enter through these pores, especially the hot steam in the kitchen, which can easily soak into the case.

In addition, the temperature is high and the humidity is high in summer, so if the watch is suddenly cold, the air containing more moisture in the watch will condense into mist or water droplets, which will stick to the watch glass. If there are mist water droplets in the table, it should be repaired in time to wipe off the fog water droplets to prevent the water from being mixed for a long time, the parts will rust, and the surface will be colored. If there is occasionally a little fog, it will disappear naturally after the climate is dry, and it will not have a big impact on the heart.

The fogging of the watch is because a small amount of water vapor or water enters the watch, and when the temperature is high, it will be gaseous, and when the temperature is lower, small clusters of water droplets will form on the dial, which will affect the normal use of the watch.

If there is fog on the outside of the watch dial, you can dry it with a paper towel. If the watch is soaked in someone, you can wrap the watch with several layers of toilet paper or a relatively absorbent velvet hand cloth, put it next to the light bulb about 10 cm, and bake it for about 30 minutes, which can effectively improve the water mist of the watch. Be careful not to bake your watch near a heat, as this will cause damage to your watch.

If the watch is still in a foggy state after treatment, be sure to take it to a professional place for maintenance in time to effectively remove the moisture in the watch and replace it with a waterproof rubber ring.

It is best not to wear the watch when taking a sauna, bathing or washing your face to avoid moisture entering the watch and affecting the normal operation of the watch. If you often do sports, you can choose a sports watch, which has a certain waterproof and sweatproof effect, which can resist sweat after exercise, avoid sweat corrosion of Zhengpai case, and affect the beauty of the watch.

Do not open the back cover of the watch frequently, as opening it frequently will lead to the entry of dust and affect the normal use of the watch.

The reason for the fogging inside the watch is that a small amount of water or water vapor has been added to the watch, and the solutions are: 1. Sunning; 2. Blowing with a hair dryer; 3. Wearing the watch backwards; 4. Send it to a repair shop for repair.

1. Sunning: Open the back cover of the watch first, wrap the watch completely with a paper towel or flannel, and take it to the sun for half a day to remove the water vapor in the movement.

2. Hair dryer blowing: The watch can be fogged up with a hair dryer to blow the acacia slowly dry, use the hot air of the hair dryer to blow until the glass can not see the water mist, and then blow again the next day, and the water mist will be gone after 4-5 consecutive days.

3. Wear the watch backwards: If the water mist of the watch is not much, then wear the watch backwards, with the watch glass inside and the bottom shell outside, and dry the water mist with the temperature of the human body.

4. Send it to a repair shop for repair: If there is a lot of water mist, you have to take it to the repair shop for repair, otherwise the water mist will soak the watch for a long time, and the watch will be easily damaged.