What should I do if the refrigeration dryer frosts during the current operation of the air compresso

Too much ice in the refrigeration dryer may affect the life of the air compressor. The following methods are adopted: 1. There is a hot bypass valve in the refrigeration dryer, which can play a role in ice melting. 2. Turn off the refrigeration dryer. 3. If the gas consumption is too small, increase the gas consumption.

Summary. Hello, what to do if the air compressor is currently in operation: the weather temperature is a cause of the frost of the air compressor, and the best way to solve this problem is to install the corresponding warmth measures around the equipment in advance.

Doors and windows can be closed indoors, (the exhaust duct should still ensure good ventilation), and a layer of insulation can be made outside the wall if possible.

If you are outdoors, you should set up temporary simple protective measures.

All of these tasks require users to take precautions in advance.

What should I do if the refrigeration dryer frosts during the current operation of the air compressor unit

What to do if the air compressor is currently in operation: the weather temperature is a cause of the frost of the air compressor, and the best way to solve this problem is to install the corresponding warmth measures around the equipment in advance. In the room, you can close the door bucket and clear the window, (the exhaust duct should still ensure good ventilation), and if possible, you can make a layer of insulation outside the wall.

If you are outdoors, you should set up temporary simple protective measures. All of these tasks require users to take precautions in advance.

The following methods are adopted: 1. There is a hot bypass bending valve in the cold standby source dryer, and the buried slag can be adjusted to melt ice. 2. Turn off the refrigeration dryer. 3. If the gas consumption is too small, increase the gas consumption.

What is the shape of the hot bypass valve?

Hello, the hot bypass valve is installed in the first place: first of all, the hot gas bypass valve is sold in Gaozhou, in order to keep the system down, only rely on the on-off control of the solenoid valve, when the temperature is reduced to the set temperature, the solenoid valve is closed, and the general installation position of the bypass valve is the inlet of the condenser (increase the tee) and the expansion valve behind the evaporator before the evaporator (add the tee).

Hello, that's it, dear

What should I do if the refrigeration dryer frosts in the current operation of the air compressor dear! Weather temperature is a cause of frost in the air compressor, and the best way to solve this problem is to install corresponding warmth measures around the equipment in advance. Doors and windows can be closed indoors, (the exhaust duct should still ensure good ventilation effect of side combustion), and a layer of insulation can be made outside the wall if the trace cavity is conditional.

If it is outdoors, it is necessary to set up temporary Jianyun Prefecture virtual easy protection measures. All of these tasks require users to take precautions in advance. Hope it helps!

Too much ice in the refrigeration dryer may affect the life of the air compressor.

Take the following approach:

1. There is a hot bypass valve in the refrigeration dryer, which can play a role in ice melting.

2. Turn off the refrigeration dryer.

3. If the gas consumption is too small, increase the gas consumption.

The freezing of the refrigeration dryer indicates that the cooling effect of your refrigeration dryer is very good, the reason for the freezing is that your gas consumption may be too small, and your refrigeration dryer may be a little large, in this case you can turn off the refrigeration dryer and let the refrigeration dryer stop refrigeration, if the water content of the air end is large, you are starting the refrigeration dryer. Angelida Electromechanical Equipment****.

Summary. The fan of the air dryer keeps running, and the frost outside the compressor has an impact on the performance of the dryer?

There are three reasons why the cooling fan has been rotating due to frost outside the compressor and has an impact on the performance of the dryer: 1. The fan has been running due to the circuit control of the machine, 2. The starting pressure of the fan controlled by the pressure switch is too low (generally 17kg) or the pressure switch is broken, and the contact becomes longer and closed, 3. The high pressure caused by compressed air or high ambient temperature or dirty condenser is caused by high pressure and the fan has been running.