Huawei s screen is flooded, and three large bright spots appear after a few days, and the phone can

After the mobile phone is injected, there may be abnormal function, in order to reduce the loss, it is recommended to deal with it as follows:

1.Try to place your phone in a dry and ventilated place, and use a paper towel to blot the liquid on the surface of your phone.

2.If the phone is powered on, press the power button to turn it off; If your phone is turned off, don't try to turn it on.

3.Remove the SIM card.

and memory cards. 4.Take your phone to a nearby Huawei customer service center for maintenance as soon as possible to avoid unnecessary losses. If you don't have a backup of your data.

There may be a risk of data loss when repairing.

Notes:1Do not move or shake your phone frequently after the liquid is ingested to avoid the spread of liquid inside the phone.

2.Do not blow with a hair dryer or bake at high temperature after liquid intake, so as to avoid the liquid being blown into the inside of the phone and the high temperature damaging the phone.

3.Mobile phones are made of precision electronic components.

There is a hidden risk after liquid infusion, so it is recommended not to try to turn it on.

After the Huawei phone is flooded, the bright shift inside the screen is a watermark, you can take it to the mobile phone repair shop and ask the master to open it and clean up the watermark.

If there are three bright spots after the Huawei screen is in the water for a few days, it will definitely be usable,But there will be more and more in the back,I still recommend that you just take it to the mobile phone store to repair it, it's better。

After the Huawei screen entered the water, there were three large bright patches, and the phone could still be used, but you need to use a hair dryer to dry the phone to remove the water from the screen.

If it's just a problem with the screen, you see if the impact is big, if the impact is big, then you can only change the screen of the mobile phone, it is also possible that a part of the motherboard is broken, and it may also depend on how much the mobile phone repairs, more than 500 There is no need to repair it.

It can be used, the screen is burned.

Turn off and disassemble the phone immediately, dry it, and do not turn it on again until the water is dry, otherwise the water will aggravate the erosion of the phone screen.

Generally, if there is water in the screen of the mobile phone, you must not try to turn it on, and you should try to turn it off first after this time. Because in fact, mobile phones are also electronic products, and if a large amount of liquid enters the inside of electronic products, there will actually be a certain risk of short circuit, so at this time to force the machine on, it will damage some of the lines or parts inside. After shutting down, remove some of the moisture inside as soon as possible.

Precautions for water ingress of mobile phones.

At this time, you can also put the mobile phone in rice or desiccant to use a sealing method to absorb all the remaining water droplets and water vapor inside the mobile phone, but the professional desiccant and drying box have better water absorption effect.

Try not to press any buttons before the phone is completely dried to prevent a short circuit from damaging the phone, do not switch on and off frequently for testing, and wait at least two hours to turn on the phone to see if it can work normally.

The above content refers to People's Daily Online-Mobile phone water does not use a hair dryer! An immediate shutdown is the best policy.

Once the mobile phone enters the water, you must not turn it on immediately, when you turn it on, the current level is easy to burn the motherboard after encountering water, and the mobile phone is close to being scrapped. What we want to do is that the mobile phone can be safely and securely repaired as much as possible after entering the water, the battery of the mobile phone should be removed and the moisture on the surface of the battery should be wiped dry, and then the mobile phone should be absorbed by using dry paper towels back and forth up and down, and then use the hair dryer to aim at some small gaps in the mobile phone to blow and absorb water, special attention should be paid to the following: the hair dryer can not be turned on too hot, otherwise it will blow hot air into the mobile phone, which will easily cause some accessories in the mobile phone to preheat and melt, do not shake the mobile phone all the time after the mobile phone enters the water, If you shake the phone at this time, it will often make the water flow to the phone more inside, the gains outweigh the losses, almost wipe the water of the phone, if you know how to disassemble the phone, if you are sure, it is recommended to disassemble the phone for a more comprehensive absorption of water After absorbing water, it is still not reassuring enough, because it is very likely that there is excess water that is not dried and causes water mist on the inner screen, so continue to absorb water and prepare a pack of cheap dry tea leaves, and put the phone inThen squeeze out the air in the tea bag, tie the dead knot, put a dry tea for two or three days will absorb the excess water in the mobile phone or put the mobile phone into a ziplock bag, seal the mouth, and then put it into the dry rice cylinder for two or three days, the rice will also absorb the excess water in the mobile phone, because many broken particles in the rice will enter the mobile phone slits, so you should put it into the ziplock bag first.

After two or three days, take out the phone, you can prepare to turn on, and at the same time, you will also find that the inner screen of the mobile phone has no water mist, oh, if unfortunately your mobile phone can't be turned on, you can only send it to repair.

Just let it out in the sun for a while.

The liquid inlet treatment method of vivo mobile phone is as follows:

1. Shut down immediately and take out the SIM card and SD card; Do not sell and force the boot to boot, the forced boot is likely to cause a short circuit.

2. Lay the fuselage flat, use a paper towel or soft cloth to absorb water, and try to absorb the water in the gaps; Try not to move your phone when absorbing water.

3. Do not attempt to charge; Don't shake your phone too hard; Do not heat your phone.

4. Stand in a ventilated and dry place, and place it with the screen facing up and the front camera tilting upward;

5. Bring your mobile phone to the vivo customer service center as soon as possible, so that the maintenance engineer can conduct professional testing, and the address of the vivo customer service center: enter the vivo official website vivo**app--my-service outlets or vivo official website--the bottom of this sliding bottom--service support--service outlets query--select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

vivo official customer service center.

If you are using an OPPO mobile phone, after water or liquid ingress, in order to avoid further damage and leakage, it is recommended to deal with it according to the following methods:

1.Judge the power on and off status of the mobile phone, if the mobile phone is turned on, please turn it off immediately, if the mobile phone is turned off, please do not try to turn it on;

2.Take out the SIM card and memory card of the mobile phone in time, and remove the battery if the mobile phone is a removable battery;

3.Use a paper towel or cotton swab to dry water stains on the surface of the mobile phone;

4.If you do not clean it after liquid ingress, it will accelerate the oxidation and damage of the internal components of the mobile phone, so it is recommended to send it to the customer service center for testing and maintenance as soon as possible (OPPO official website "Service" outlet inquiry and appointment).

Precautions are quietly searched:

1.Please do not turn on or charge the phone after water ingress, at this time, powering may cause short circuit damage to the components of the mobile phone;

2.Please do not try to shake off the moisture by shaking the phone, this operation may cause the liquid to seep into other components;

3.Please do not use a hair dryer or oven to bake the mobile phone, as high temperature and high heat may cause permanent damage to the components of the mobile phone (the moisture inside the mobile phone may penetrate into other components of the screen after being heated into water vapor by the hair dryer, etc., which will cause the mobile phone to be damp and damage the electronic components).

If you are using a Huawei mobile phone, it is recommended that you turn off your mobile phone and bring the relevant proof of purchase to a nearby Huawei customer service center for repair. You can use the following link or the Huawei official website to find the address of a Huawei Customer Service Center near you.

Precautions after water and liquid ingress in the mobile phone:

1.Do not move or shake your phone frequently after water is ingress to avoid moisture spreading inside the phone.

2.Do not use a hair dryer or bake at high temperatures (including microwave heating) after water is in, to avoid liquid being blown into the phone and the heat damaging the phone.

3.Mobile phones are made of delicate electronic components, and there is a potential risk after water ingress, so please keep your phone turned off.

4.If you don't have a backup of your data, there may be a risk of data loss during repairs. After you go to the Huawei Customer Service Center, you can consult with a staff member to help you evaluate whether you can back up your data.

Customer Service Center.

Make an appointment for service. Boarding service.

When the mobile phone is flooded, a piece of white light appears on the screen may be due to water entering the backlight plate in the gap of the screen, resulting in the light guide plate reducing the light guide plate, and at the same time, the water located in the backlight plate will generate different shapes of light spots under the irradiation of light.

Here are some ways to deal with it and what to keep in mind:

Turn it off immediately, and if you can pull out the battery, don't hesitate to pull out the battery immediately. This is the first action that needs to be taken to prevent short circuits or other damage. Use a hair dryer or air conditioner to blow at intervals, not only to dry the surface, but also to blow for a while after the surface is dry.

Don't turn it on at random at this time. Put your phone in a dry place, let the water evaporate slowly, and don't turn on the phone hall at will. Turn the electric heater on and heat it up until the case is slightly hot.

Turn off the power of the mobile phone, place the mobile phone screen down against the hot shell of the electric heater, and pay attention to stick the parts with watermarks and bright spots on the electric heater shell. At this time, it is necessary to ensure that the mobile phone is turned off, that is, the battery of the mobile phone is turned off. Do not heat or blow with hot air at will, otherwise the display problem will be more serious.

If none of the above measures solve the problem, it is recommended to seek professional help from a repair point. In terms of treatment, a hair dryer or air conditioner can remove moisture from the surface, but it cannot completely remove the moisture from the inside of the bridge. It takes a certain amount of time to place the phone in a dry place, and it may not be able to completely remove the moisture, so you need to wait slowly.

The way the electric heater is heated may cause some damage to the phone, so it needs to be used with caution.

There are two possibilities for bright spots, one is that the screen is broken because of water ingress, and the other is that the water is not dry, and there are water droplets on the screen to form water droplet highlights, and it is best to disassemble the machine for maintenance to see the specific situation.

Either change the screen, because the bright spots of the water screen are impossible to remove.

Blow it with an electric fan and turn it on every two days.