What to do if the non woven wallpaper is moldy, and what to do if the non woven wallpaper is dirty?

Generally, if you find that the wallpaper in your home has dust or stains, you can first try to wipe it with a wrung out rag, and if you find that there is stubborn dirt, you can use our usual household or specially used to maintain the wallpaper cleaner, if it is not a particularly dirty wall or stain, we can clean the wall.

Of course, the above is just for the general method, and the following is a more effective and clean way to clean the non-woven wall:

Prepare the steam remover, spray, suction machine, and then use the vacuum cleaner to fully vacuum the dust and impurities on the surface of the wallpaper, and then spray the sprayer filled with detergent we prepared in advance on the surface of the wallpaper, wait for the stain to come off (depending on the effect), clean it with a steam cleaner (at least twice), and finally wipe the surface of the wallpaper with a wringing cloth prepared in advance.

Like the general stains and dust, after the method described to you above, it can basically be cleaned up, but if the non-woven wallpaper in our home is indeed very seriously defaced, and the above methods do not work, then you can consider changing the wallpaper, compared with the non-woven wallpaper, the general PVC wallpaper is relatively high in stain resistance.

Generally, after pasting wallpaper on your home, you should usually take care and maintain the wall as much as possible, such as preventing hard objects from rubbing or hitting the surface of the wallpaper. On the wall near the kitchen and bathroom, it is best to replace it with tiles, because it is more resistant to dirt and has a longer life. Avoid uneven heat and cold in summer and winter, reduce wallpaper life, and more.

1. Sterilization before mold removal. First of all, if the wallpaper is only damp, but there is no mildew, this treatment is relatively simple, as long as the wallpaper is dried with a hair dryer, or the vacuum cleaner with a brush can be processed while brushing, it is important to note here, do not use a damp cloth or wipe the wallpaper when the wallpaper is not dry. Further, if the surface of the wallpaper has mildew, then alcohol is required.

Alcohol has the effect of disinfection and sterilization, and low concentration of alcohol can kill mold and prevent wallpaper from growing mold again. You can choose a concentration of 5% alcohol or a 1:24 84 disinfectant, dip a little with a rag, and wipe it!

2. Dehumidification and drying. If you want to ** wallpaper long trembling mildew problem, the biggest requirement is that the indoor environment is dry and refreshing! Therefore, it is not enough to just deal with wallpaper, in order to prevent mold in the future, if the home environment is damp, you can choose some desiccant to be placed at home.

Generally, a dehumidifier will be selected for large spaces to remove water vapor in the air; And if the space is small, there is no need to use a dehumidifier, just choose some dry tea leaves, lime, activated carbon, etc. to remove the moisture in the air!

3. The wallpaper should be repasted if it is seriously moldy. To deal with moldy wallpaper, the most important thing is to choose the treatment method according to the area of the wallpaper mold! Generally, the moldy area of the wallpaper is small, as long as the small area is cleaned up, the mountain forest is good; And if the moldy area is large, when it reaches one-third, it is recommended to change the wallpaper!

In order to ensure that after changing the wallpaper, there will be no more mold, it is best to remove the wallpaper and wall decoration together, and then check whether the wall is seeping, and then re-paste the wallpaper. Under normal circumstances, the wallpaper has a large mold area, which is less likely to be caused by humid weather, and is more likely to be caused by damage to the water pipes in the wall, damp water seepage and other reasons, so it is important to check the waterproofing of the wall and the water pipes in the wall when repasting the wallpaper.

The above is the solution to the damp and mildew of wallpaper that I shared with you, and those who need it can learn about it, I hope it can help you.

Non-woven wallpaper is currently a popular wallpaper, easy to take care of, and has good air permeability, so that the moisture between the wallpaper and the wall can be volatilized, not easy to grow mold, so it is very popular. The wall wallpaper will inevitably fall into dust or rub some dirty things, so how can we take care of the non-woven wallpaper?

1: If the non-woven wallpaper is accidentally stained, you can use a soft cloth to wet it with water, and then screw it until it does not drip water, and gently wipe the surface, which can effectively deal with ordinary stains.

2: If the surface of the non-woven wallpaper is covered with dust, then we only need to clean the dust on the surface of the non-woven wallpaper with a vacuum cleaner or with chicken feather zen.

3: If the stain of the colored pen is accidentally stained on the non-woven wallpaper, you can choose to use an eraser, soapy water, etc. to remove the stain. Generally, pencil stains should be gently wiped with an eraser; If it is a watercolor pen stain, wipe it with soapy water first, then wipe it with a soft, dry cloth; If it is a crayon stain, wipe it lightly with a sponge light chain; Stains on ballpoint pens require a semi-damp towel to clean.

4: Stubborn stains can be sprayed on the surface of the stain with a stain remover. Once the stain has come off slightly, it can be cleaned with a steam cleaner and then dried with a clean rag.

5: For deeper stains, you can use a sponge dipped in professional stain remover and gently wipe it. Non-greasy stains can be scrubbed with a sponge dipped in low-concentration neutral soapy water.

Non-woven fabrics are made of cotton, hemp fibers and other materials, simply put, they are fabrics similar to umbrella cloths, which can play a little waterproof function, but cannot be completely waterproof.

Non-woven fabrics are known as "breathing wallpapers", which have good air permeability and are conducive to moisture exchange between the wall and the air; For long-term use, there will be no feeling of holding air, it is not easy to mold, and the wallpaper is not easy to fall off and curl when the paper glue is soaked in water. However, if you scrub directly with water, it is easy for the water on the surface of the wallpaper to penetrate into the inside of the wallpaper, affecting the glue of the wallpaper, which may cause the wallpaper to fall off, warp corners or cracks.

1. After the primer coating is dry, draw a vertical line as the standard to avoid pasting the wrong wallpaper.

2. Do not use a hard scraper or nylon brush after the wallpaper is on the wall. A soft-bristled brush should be used to gently scrape from top to bottom to smooth the surface of the non-woven fabric and remove air bubbles and wrinkles. Do not scrape off the glue at the joints to avoid contamination If you accidentally squeeze the glue out of the surface, wipe it off immediately with a dry towel and try to keep your hands clean during the empty construction shed.

3. During the construction process, inspect while constructing, stop the construction immediately if the problem is found, and then proceed after finding out the reasons and solutions.

At the turn of spring and summer, the rainy weather increases, the wall leaks, and the wall cloth is moldy. What should I do if the wallcovering is moldy? Mawang Encyclopedia believes that after the wall cloth is moldy, the first thing we need to do is to find out the cause of mold, and then prescribe the right medicine.

Causes of mold on the wallcovering

1. The air is humid

When the air is wet, the moisture of the wall is easy to be too high, and the wall cannot volatilize the water in time. The wall cloth remains moist in contact with air for a long time, thus forming a vicious circle process of "dry, wet, dry, wet", so that the anti-mildew molecules in the adhesive product itself continue to volatilize and destroy, and when the anti-mildew molecules volatilize or destroy to the point of losing the anti-mildew effect, the bacteria have the ability to grow and the space to multiply to form mold.

2. Water seepage on the wall

There are also some wall coverings that are prone to mold because of the original construction of the wall itself. The moisture in the wall itself is too high and not completely dry to carry out the wall cloth construction, after the construction of the water in the wall can not volatilize and directly seep out, in the continuous penetration process or the moisture with the alkaline and other harmful substances in the wall, resulting in direct damage to the anti-mildew molecules of the adhesive product.

How to deal with moldy wallcovering

Dry towel + colorless disinfectant

For the mold of the wall cloth caused by the moisture of the air, the treatment method is dry towel + disinfectant. Use a dry towel to "stain" off the mildew first, and remember not to wipe it directly, otherwise it will wipe more and more. Then spray the disinfectant on the wallcovering in the corner of the wall.

Reinstall

If the wall is moldy due to water seepage, there is no other way but to reinstall the wallcovering. Note that when carrying the closed installation, it is necessary to resolutely solve the problem of water seepage on the wall.