HP G4 boot slowly, HP G4 computer can t turn on, how to get it

It's not simple, there are too many software that run automatically at boot Uninstall Kingsoft Install 360 Security Guard In the startup settings, turn off the unnecessary automatic run program It will definitely be faster The automatic update you said That's updating the system You remove the automatic update of the system.

I'm using HP G4,When I first used it, there was indeed a slow boot situation,I used the 360 boot acceleration function to prohibit the startup items about HP,This does not affect the use。 Now it turns on for about 36 seconds.

If you have more than one antivirus installed, it is recommended to start only one of them.

The best way to do this is to reinstall and update frequently. Sometimes it is turned off and updated, and it is not turned off for half a day, and sometimes it is turned on and updated, and it is not turned on for half a day. If you can't finish the update, don't force it.

If there are many software to start at boot, turn off a few. Or optimize it. Do not install more than 2 anti-virus software, and turn off automatic updates.

1. You can start - run - hit the msconfig command to close some random programs that are not required to start in the startup. See if there is an improvement. 2. Specify a fixed IP address, which may also improve the power on/off.

3. It may be caused by a virus, you can try to update the antivirus software version and conduct a comprehensive antivirus to see if it can solve this problem. 4. If there is still a problem after the above operations, then it is recommended that you save the important files and reinstall the operating system.

Reasons and solutions for computer not turning on:

Step 1: If the power supply does not respond, then check whether there is a problem with the power supply, poor contact, hardware, etc., and go to the second step, if it is unable to enter the system, it may be an operating system or software problem to go to the third step.

Step 2: Check whether there is a power supply problem, first see if the power supply is not plugged in well or there is a problem with the plug, if you are using a battery, then plug it in and try again. You can go to a friend or go to a computer repair shop or sales store to find the same model of power supply to try it.

After replugging the power supply, press the power button again, and if it still can't be turned on, then press it for a while. If you change someone else's power supply to turn on, it means that there is a problem with the power supply, if it proves that the power supply is fine, it may be the hardware reason, go to the fifth step.

Step 3: Go to the last correct configuration to adjust, turn on and press and hold F8, enter the advanced options page, select "The most recent correct configuration", and press Enter. If it can enter the system, it may be caused by viruses, incompatible hardware drivers with the system, or operating systems.

After entering the system, run the anti-virus software, check and kill the virus, if there is a virus, restart the computer after the anti-virus, if it is not normal, it may be caused by the incompatibility of the device driver and the program, delete the graphics card, network card and other drivers, restart it after removing the driver, if there is still a problem, then go to the next step.

Step 4: Repair and install or reinstall the system, set "Optical Drive as the first boot device" in the BIOS, then insert the system disk, and press the R button to perform "Repair and Installation". If the fault persists, just at the beginning of the system, select "One-click GOST to restore the system" or use the system disk to reinstall the system.

Step 5: Check whether there is a hardware problem, disassemble the notebook to see if the hardware is loose, generally the hardware is not plugged in well, there will be an alarm sound, the long sound continues to sound that the memory module is not plugged in tightly, one long and one short means that the memory or motherboard has a problem, one long and two short means that the graphics card is wrong. If there is too much dust inside the notebook, it is best to clean it up first.

In addition, pay attention to whether it is caused by the new hardware, if it is normal before the replacement of the hardware, and it is not normal after the replacement, then check whether it is compatible. If it can't be started at this time, it is best to send it for repair, and the professional will check whether there is a problem with the hardware one by one.

The solution to the long black screen time of upgrading win10 is as follows:

1. Fix it by the following methods: right-click the "Windows" button in the lower left corner of the desktop, and select the "Run" item from its right-click menu.

2. From the "Run" window that opens, enter "msconfig" and press the enter key to enter the "System Configuration Utility" interface.

3. In the "System Configuration" window, switch to the "General" tab, check the "Selective Startup" item, and check "Load System Service" and "Load Startup Item" at the same time.

4. Switch to the "Boot" tab, set the "Timeout" to "3" seconds, and click the "Advanced Options" button.

5. From the "Boot Advanced Options" interface that opens, check "Number of processors" and set "Number of processors" to "2". Finally, click "OK" to save.

Use 360 to clean up junk files, optimize startup, and speed up will have a little effect. But it won't be like a new one, and computer enthusiasts generally reinstall it once a month and solve the problem in 5 minutes each time.

Use some applications to clean up garbage,If it's still slow, consider reinstalling the system after backing up important data,After reinstallation, the C disk will be clear except for the system files,If it's still slow, install a memory module,The memory space will run faster,If you don't think it's good, take it to the computer market to remove dust。

There are too many things on the computer.,Clean up the system garbage.,You can also change the card to the Apple computer.。

There are a number of things that can be caused by a computer running card, and you can consider the following ways to deal with the problem:

1.It is recommended that you can choose to enter safe mode by clicking the F8 button when you boot (or restart).

a.If the system is normal in safe mode, the system and hardware are normal - you can carry out a comprehensive check and kill viruses; Then disable the boot startup item, start --- running--- enter msconfig to uncheck all the unnecessary items (such as msn qq thunderbolt emule virtual optical drive, etc.).

b.If you have this problem when running in safe mode, it may be related to the system or hardware

You can adjust the virtual memory computer icon --right--Properties--Advanced System Settings--Advanced-Medium-Performance--Settings--Advanced-Medium"Virtual memory"--Change; If the "Custom" option is grayed out, please uncheck the "Automatically manage paging file size for all quiet drives" option and try again. Here, please try to increase the virtual memory capacity appropriately, which can generally be set to multiple times the physical memory of the machine.

If the above operations do not work, you can back up your data and go to BIOS to test the hard disk: it is recommended to press F10 to enter the BIOS after booting up, select System Diagnostics, and run the Primary Hard Disk Test to test the hard disk. During the test, it is recommended to connect the external power supply to maintain the power supply.

If the hard disk is detected (usually prompting good, pass or succeed), you can back up the data, reinstall the original operating system and observe and test it;

If the hard disk fails to detect (usually fails or errors), you can contact the Gold Service Center to repair the hardware on site. Rock wheel.

We hope you find the above reply helpful.

This has nothing to do with memory, this kind of black screen with a little backlight gray screen is generally a problem with the graphics card chip. Have you ever had any other problems before, how is it broken?

Detect the keyboard, it may be that your keyboard is broken, and a certain key has been pressed.