What is the reason why the Junpai A50 car burns gas and walks around, and the idle speed rises to 2,

The combustion of natural gas is not uniform enough, the idle air volume hole is blocked, the idle device works poorly, the spark plug spark of individual cylinders is too weak, the sealing of individual valves is not tight, the intake manifold leaks, the ignition time is too early or too late, and the idle speed adjustment is improper.

It may be a problem with oil supply, ignition or idle valve, and it is recommended to go to a professional repair shop for maintenance. In terms of fuel supply, there are mainly gasoline filter plugging, injector fuel injection poor atomization, etc.

Junpai A50 car burns gas. When you walk, you can't add gas, and the idle speed is unstable and rises to 2,000 rpm. If algebra doesn't work yet. There's something wrong with this gas supply. The ventilation line should be inspected for blockages.

Well, if you can't add it when you go out for a walk, it should be a woman, and I think it should be a system or an electric can't bring it up, and there is a problem with the engine.

In this case, it is very likely that the speed is raised too low, so the engine is not running smoothly.

Bidding, hey, Wuling car to go around can't add gas, you like this kind of gas car well, his single speed, otherwise there are 2000 rpm left in this park The reason is that his gas may be insufficient.

After walking, if you can't stop and stop, the reason why the idle speed is stable at 2000 rpm is because his car is like this, unstable.

It should be that there is a problem with the sealing of Junpai A50 cylinder, resulting in low gas efficiency and reduced power.

The Junpai A50 car will not be able to add gas if it is postponed, and the idle speed will be unstable, rising to two strings.

This is caused by its power instability, and in this case, it is likely that some of its resistors or capacitors are damaged bonds.

Junpai A50 car burns gas and walks can not be gased, and the idle speed is unstable to 2,000 rpm, it is recommended to check whether there is a problem with the gas control valve of the car.

Summary. After running more than 200,000 kilometers, I feel that the acceleration is weak, in this case, the main reason is that after the number of kilometers of the engine is large, the performance of the engine decreases greatly, and this phenomenon will occur. Check the cylinder pressure of the engine, if there is no problem, then you need to clean the carbon deposits in the engine cylinder, replace the spark plugs, and clean the fuel injectors.

There are also three catalytic converters that need to be checked to see if there are any blockages.

Dear, this question is up to me, it takes a little time to type, please be patient, thank you!

After running for more than 200,000 kilometers, I feel that the acceleration is weak, in this case, the main reason is that after the mileage of the engine is large, the performance of the engine will decline significantly, and this phenomenon will occur. Check the cylinder pressure of the engine, if there is no problem, then you need to clean the carbon deposits in the engine cylinder, replace the spark plug, and clean the silver injector. There is also a need to check the three catalytic converters to see if there is any blockage.