It s connected to the Internet, why is there an exclamation point in the lower right corner?? Thank

You don't need to worry about it, if you don't like it, just double-click on it and put a check mark in front of the local connection that doesn't show up.

That's okay It's not something restricted.,Actually, it's on.,I'd like to hear that it's related to system compatibility.,Mine too.。 But the Internet has no effect.

1. An exclamation mark appears on the Internet, indicating that the Internet access is restricted, and there are usually two reasons. On the software side, IP address conflicts cause DNS resolution errors, resulting in network addresses not being recognized, resulting in exclamation points. In terms of hardware, check whether the optical modem indicator is normal, and the crystal heads at both ends of the network cable are connected incorrectly.

2. The network is composed of a number of nodes and the links connecting these nodes, representing many objects and their interconnections.

3. Before 1999, it was generally believed that the structure of the network was random. However, it was not until Barabasi and Watts discovered the scale-free and small-world nature of networks in 1999 and published their findings in the world-renowned journals Science and Nature, respectively, that the complexity of networks was recognized.

4. The network will bring people an extremely rich life and beautiful enjoyment from text, viewing, video and audio, transmission, games, chats and other software tools with the help of text reading, viewing, video and audio, transmission, games, chats, etc.

If you use a vivo mobile phone, there is an exclamation mark next to the wifi signal icon, indicating that the wifi network currently connected to the device is not available, it is recommended to keep the device closer to the source of the wifi signal group or connect to other wifi networks.

The phone is connected to wifi normally but can't access the internet:

1. Check your phone's settings.

Go to Settings --WLAN and check if the wifi has been successfully connected.

Go to Settings - Other Networks & Connections - Private DNS to see if Private DNS is set, if so, it is recommended to set Private DNS to off and try again.

2. Check WiFi

Please compare whether the same wifi connection is normal with other mobile phones, and confirm whether it is the wifi or mobile phone. If it is due to Wi-Fi, please restart the wireless router to check. Some public Wi-Fi networks require browser authentication before they can connect to the Internet.

3. Check the network permissions.

Please go to iButler - Traffic Management Traffic Monitoring - Network Management - WLAN - Turn on the software networking permission.

4. Check the environmental causes.

If the phone is far away from the router, although the wifi signal is displayed, it may not be able to access the Internet, it is recommended to adjust the distance between the phone and the router before trying.

5. Reset the network settings.

Make a backup of wifi and other data, go to Settings - System Management - Backup and Reset - Reset Network Settings - Reset Settings, and then use it to view.

Note: Resetting the network settings will clear the connection records such as Wi-Fi, mobile data network, Bluetooth, etc.; If you have dual SIM, you need to select the corresponding SIM card.

6. Reset all settings (do this when you can't see the reset network settings menu).

Note: This action does not delete software or files, only resets all settings; For data security, it can be used to back up important data before operation.

7. Service center testing.

If the above methods do not solve the problem, please back up your mobile phone data in advance, and bring your mobile phone and purchase voucher to vivo customer service center for testing.

Customer service center address: enter the vivo official website vivo**app--my--service outlets, after-sales outlets--select provinces and cities to query the customer service center address).

An exclamation mark is a type of punctuation mark that is generally used to express feelings or tones such as exclamation, questioning, command, etc. On the web, exclamation points can also have special meanings.

The exclamation mark is often used on the Internet to express emphasis and prominence. For example, when we are chatting or sending a message, using exclamation points can make the statement more vivid and powerful, expressing strong emotions such as joy, sadness, anger, surprise, etc.

Additionally, in some cases, an exclamation point may also indicate some level of sarcasm or wittiness. For example, the use of exclamation points in certain jokes or funny emojis often has this special meaning.

It should be noted that in online communication, excessive use of exclamation points may be considered as overly emotional or emotional, so in daily communication, the appropriate use of exclamation points can have a better expression effect, but do not overuse them.

In general, the meaning of exclamation marks on the web is varied, and it needs to be understood and used according to specific contexts and situations. It conveys emotion, accentuates tone, and may have special meanings that embody humor and sarcasm. <>

The local connection on the computer shows that the connection is restricted or no connection is related to the network server and network card.

Check to see if your network cable is plugged in properly, or if there is a problem with the network cable.

Whether the IP address is correct.

The yellow exclamation mark of the network connection appears, first of all, what does the yellow exclamation mark mean? It means that there is an abnormal situation in the device driver of the computer device, and you need to find a suitable network card driver to update it, that is, the problem of the network card driver.

Here's how to check if your driver is abnormal? Click the "Device Manager" -- click the "Scan and Detect Hardware Changes" button at the top of the toolbar to see if there are yellow warning signs in the various driver columns? If there is, it is a hint that the driver is not installed correctly.

Right-click on the device that needs to update the driver - update the driver - automatically install the update driver - restart the computer. Now check to see if your computer is back to normal.

Find "Internet Neighbors" (generally on the desktop, if you don't have it, you can also enter my computer on the left side) - right-click --- select Properties, and enter the following interface:

If you do not find a local connection in the properties of the network neighbor, then in most cases the network card is not connected well, or there is a problem with the driver, of course, it may also be a problem with the network card, which will be described below. At this time, the same right-click on the local connection - select properties - enter the following network setting interface, as long as the following 2 are typed, and then click OK to display the local connection in the lower corner of the desktop. This is one of the most common cases where the local connection is missing, and most of the time it is just not set up properly.

If the local connection is gone, and you can't access the Internet, then first of all, as above, find the "Internet Neighbor" (generally on the desktop, if you don't have it, there are also on the left side of my computer) - right-click --- select Properties, and enter the following interface: right-click on the local connection and select "Enable".

1. Click "Network" on the desktop and select "Network and Sharing Center".

2. Then in the interface that appears, select to turn on "Local Connection".

3. Click "Properties" and select the "Internet Protocol Version 4" option.

4. Click "Properties" to check "Automatically obtain IP address" and "Automatically obtain DNS server address", and press enter to confirm.

5. Then you can see that the yellow exclamation mark disappears.

There are still exclamation points in this way.

Ask why?

Asked questions also tried.

Asking questions is tantamount to asking for farewell.

Win7 wireless network shows that it is connected but cannot be connected to the network, and there is a solution to a yellow exclamation mark.

I believe that many people usually use the computer to surf the Internet, will encounter the situation that the computer suddenly cannot access the Internet, and an exclamation mark will appear on the network connection icon below the computer. Next, I will tell you about the rabbit.

The exclamation mark indicates that you are not connected to the Internet and can only access the local area network. According to your first screenshot, you can find that the broadband connection is disconnected, and if it is a dial-up connection, you need to connect to the broadband first. If you are connected to the network by non-dialing, you can try to right-click on the small computer icon of the network, select "Open Network and Sharing Center", you will find that there is an exclamation mark on the Internet line, click the exclamation mark and let the system automatically fix it to see if it can solve the problem.

2.Locate Network & Internet

3.Open state.

4.Click Change adapter options.

5.Right-click on the WLAN and go to Properties.

6.Select Internet Protocol version 4 and click on Properties 7Check the automatic acquisition of IP address and automatic acquisition of DNS server address computer wireless connection yellow exclamation mark is generally the operator has no network, you can call Unicom Telecom** to inquire, if they tell you that there is no problem, it means that there is a problem with your network cable, after the reset can be.

If there is still no net, you can check it as above.

Open the network connection in the Control Panel... Add in the dialog box... Establish as the default connection... Cite... Confirm.

There is a problem with your network card, see if the driver is installed, and if it doesn't work, change the network card.

The computer network card shows limited or no connection, which directly indicates a problem, under the default automatic access, the network card cannot get the IP address.

If you are using a broadband connection, or other dial-up methods to access the Internet, network card, wireless network card, whether or not this prompt will not affect your network connection. If your computer doesn't need to dial up before you can go online, your computer uses a network cable, or a device that wirelessly connects to indoor or nearby devices, and connects to the Internet through a LAN gateway device (commonly known as a router).

This is a sign that you are not able to access the Internet, and that your computer is not assigned an address under the LAN, that the LAN is faulty, or that there is a router failure. You can restart your computer and try again after a few minutes to see if you can connect to the network.

If a yellow exclamation mark is displayed on the network connection, the NIC is restricted or there is no connection

1. The NIC does not have a valid IP address. You can set up automatic IP acquisition in the "Network Sharing Center", or manually enter the IP address, subcode mask, gateway, DNS, etc., to solve the problem.

2. Router failure. If the network is not connected to the external network, adjust the settings of the router to solve the problem;

3. The NIC driver is unavailable. You can uninstall the driver of the network card and reinstall it again, and it can be solved.

If a red X is displayed on the network connection, the network cable is unplugged or loose, and you need to check or replace the network cable.

1. How to set NIC attributes.

1. Will"Local Connection 2"Renamed"Control Net a", which is used to connect to the process control network A and its properties are set as follows:

2. Will"Local connection 3"Renamed"Control Net B", which is used to connect to the process control net B, and its properties are set as follows:

3. Will"Local connection"Renamed"Operational nets", which is used to connect to the operation net, and its properties are set as follows:

After setting the attributes of the local connection, check whether the NIC is working properly, that is, connect each NIC to the network in turn to check whether the NIC is working properly.

If you don't get an IP address, you just need to assign one manually.

If the computer NIC is restricted or no connection, it directly indicates a problem, and the NIC does not obtain the IP address in the default automatic fetch mode.

If you use a broadband connection, or other dial-up methods to access the Internet, network card, wireless network card, whether this situation is not affected.

If the computer does not need to dial in before surfing the Internet, your computer is connected to a network cable, or wirelessly connected to a device indoors or nearby through the LAN gateway device (generally refers to the router we usually say) to access the Internet, then this prompt must not be able to access the Internet, and only means that your computer is not assigned an address in the LAN under the gateway, LAN failure, or router failure, restart the device, computer first.

Try again in a few minutes.