-
If your TV is in use,It means that the TV has been turned on,At this time, he must have a power switch,It is possible that his power switch is in the position of the dot in the lower right corner,At this time, the red indicates that the TV is turned on。
-
If such a situation occurs, it should be that the resistor in the imaging device is faulty, and the resistor must be replaced.
-
The dot in the lower right corner of the TV is red, which means that the power switch has been turned on, but the switch on the remote control has not been turned on.
-
In fact, it is a sign that 34 overseas TV stations approved by the radio and television department have landed in China, and the signal with a dot watermark is relayed by the unified platform of the State Administration of Radio, Film and Television (Zhongxing 6b, 134 Asia-Pacific No. 4).
-
Well, there is no other solution, the annular plaque left after the evaporation and drying of the night body leakage after the LCD screen leaks, in this case, the new display can only be replaced, which is a typical LCD screen "leakage" phenomenon.
-
This little red dot is the display of the power supply, and the little red lights up, indicating that the power of your screenshot can be used to watch TV.
-
This should be that he is aging, and the color that appears should be that the TV is going to be broken.
-
The origin red in the lower right corner of the TV should be turned on.
-
This is a malfunction of the display inside.
-
The dot in the lower right corner is red. There is a dot in the lower right corner. He's the monitor. It's red when it's off, it's green when it's on, isn't that what you mean?
-
Maybe there is another effect, I think it must be different from before, or check if he can work properly.
-
His red dot came from the monitor.
-
This question, what is the reason for the red dot in the lower right corner of the TV?
This is the switch on the TV, and you press it with your hand and it closes.
-
There's a dot red in the lower right corner of your TV,I didn't notice that after Dali turned off,This is not on,Actually, this is a working indicator。
-
That is the power indicator, and it's also where the remote control signal is received.
-
Just look at the product manual and find out what it is.
-
What is the cause of the red dot in the bottom right corner of the TV? It should be a problem with the display.
-
What causes the red dots in the left and right corners of the TV? What is the reason for that? I don't understand.
-
Look for a professional to take a look at the specific situation, and you can't say what's going on without looking at the item.
-
The dot in the bottom right corner should be the indication of the remote control, and if you see the remote control, she'll be fine.
-
What is the cause of the red dot in the bottom right corner of the TV? I think it's probably in a standby state, just one indicator, right?
-
The presence of red dots is not normal.
Reasons for red dots on LCD TVs:
1. If the position of the red dot changes infinitely, it may be a problem with the signal source or the program source itself, in this case, you only need to detect the connecting line, or you need to reconnect another connecting cable, or you can change other program channels to **, so as to solve the problem that the program source displays the red dot.
2. If the position of the red dot is fixed, it is usually caused by the quality problem of the LCD screen (belonging to the bad dot), under normal circumstances, if the number of red dots is not large, it does not affect the normal use, and it can be continued to be used without notice; If the number of red dots is large and affects the normal viewing of TV programs, you need to contact the after-sales service department of the TV to test and repair the TV sedan embedded, or replace the screen.
-
It may be normal for an LCD TV to have a red dot, which may also indicate a malfunction. Here are some possible reasons:
Normal: Some LCD TVs may contain some innocuous small defects during the manufacturing process, such as red or green pixels. These pixels are usually small and don't have a noticeable impact on the experience of the slag letter.
Faults: A red dot on an LCD TV can also indicate a fault, such as a damaged pixel, damaged display panel, or other hardware issues. If the number of red dots increases or spreads to the entire screen, it is recommended that the land section contact after-sales service or professional and technical personnel for repair or replacement in time.
In short, if your LCD TV has a red dot, you can first try to solve the problem by adjusting the screen settings or restarting the TV. If the problem persists, it is advisable to seek professional technical support.
-
A red dot on an LCD TV is usually a malfunction or damage to one of the pixels on the screen. The following is the answer and summary of the red dot on the LCD TV:
1.Pixel Fault: A red dot can be a bad pixel muffle dot, often referred to"Highlights:"or"Dead center"。
This can be caused by a defect in the manufacturing process or a long screen time. Although not normal, the occasional red dot may be acceptable.
2.Clogged pixels: Red dots can also be caused by clogged pixels, for example, dust or foreign objects on an LCD screen can cause a pixel to appear red. In this case, you can try to clean the screen carefully to solve the problem.
3.Signal interference: Sometimes, red dots can be caused by signal issues or connection issues. Check that the source and cable are working properly and that there is no interference in signal transmission.
4.TV setup issues: In some cases, the red dot may be caused by a TV setup issue. Check your TV's settings options, especially when it comes to images, colors, and pixels, to make sure they fit your preferences and environment.
5.Contact after-sales support: If the red dot problem persists or affects the ** experience, it is best to contact the after-sales support team of the LCD TV. Depending on the product warranty, they may offer solutions to repair or replace the screen.
Summary: The red dot on an LCD TV is usually a malfunction or damage to the pixels on the screen. While the occasional red dot may be acceptable, if the red dot issue persists or impacts the experience, it is recommended to contact the after-sales support team to resolve it.
At the same time, you can check the signal and connection, clean the screen, and adjust the TV settings, which may help solve the problem.
-
The presence of red dots is not normal. Reasons for the red dot on LCD TV:1、The position of the red dot is uncertain,It may be a problem with the signal source or the program source itself,In this case, you only need to detect the connection to the empty line,Or try to reconnect with another connecting wire,You can also change other program channels**,To solve the problem of the program source displaying the red dot。
2. If the position of the red dot is fixed, it is usually caused by the quality of the LCD screen (it is a bad pixel), and the number of red dots is generally not large and does not affect the normal use, so you don't need to ignore it and continue to use it; If the number of red dots is large, affecting the user's normal ** TV program, you need to contact the after-sales service of the TV to detect and repair the TV to solve the problem, or change the screen to solve the problem. Precautions: Do not put the LCD TV in a humid place, if the moisture has entered the LCD TV, you must put it in a relatively dry place, so that the moisture in it can volatilize. The LCD screen screen is coated with a special coating, so that the screen has a better display effect, the usual use of hairspray, alcohol, mosquito repellent frequently used in summer sprayed on the screen, will dissolve this layer of special coating, damage to the LCD molecules and even the entire screen, resulting in the shortening of the entire TV life.
Do not spray the cleaner directly on the surface of the screen, it is easy to flow into the screen and cause a short circuit fault inside the LCD screen, causing unnecessary losses. Cleaning the screen should also be timed and quantitative,Frequent scrubbing is not right,That will also cause some adverse effects on the TV screen。
-
Hello, there's a red dot underneath the TV. It's a problem with the TV signal,The set-top box is just output,No impact on the image,Solve it according to the following repentant steps:1、There is a red dot on the LCD TV,If the position of the red dot changes,It may be a problem with the signal source or the program source itself,In this case, you only need to detect the connection line,Or change the connection line to reconnect and try,You can also change other program channels**,To solve the problem of the red dot displayed by the section such as Tanmu source。
2. If the position of the red dot is fixed, it is usually caused by the quality problem of the LCD screen (it is a bad pixel), and the number of red dots is not large and does not affect the normal use of the red dot, then you don't need to ignore it, you can continue to use it; If the number of red dots is large, affecting the user's normal ** TV program, you need to contact the after-sales service of the TV to detect and repair the TV to solve the problem, or change the screen to solve the problem.
-
Dear, I'm glad to answer for you, it's not normal for a red dot to appear under the TV. Reasons for the red dot trembling jujube on LCD TV: 1、The position of the red dot is uncertain,It may be a problem with the signal source or the program source itself,In this case, you only need to detect the connection line,Or change the connection line to reconnect and try,You can also change other program channels to watch and answer,To solve the problem of the program source displaying the red dot。
-
Summary. Hello, I'm your counselor and I'm sorting out the answers for you, please wait.
There is a red dot in the lower left corner of the TV, and there is a transparent far dot near the red dot.
Hello, I'm your counselor and I'm sorting out the answers for you, please wait.
Is this a camera, please?
Hello, no, this is the red line to receive the signal.
Hope mine is helpful to you.
Did you read the ** I sent you.
Hope you can take a look at the ** I sent you.
I watched. I'm not blind.
Hope mine is helpful to you.
Well, there's a two-hole in there, and I thought there was a camera.
No. Hope mine is helpful to you.
No, thanks.
Hope mine is helpful to you.
-
Redness on the side of your TV can be caused by a variety of reasons, here are some common causes and how to fix them:
The TV is blinded by magnetism: check whether there are other magnetic electrical appliances around the TV that cause the TV to be magnetized and cause discoloration, such as *** machine, stereo, induction cooker, refrigerator, etc.; Usually, all you need to do is remove these magnetized appliances to bring the TV's image back to normal.
Abnormal backlight module: When the backlight module is prematurely aged or of poor quality, it will lead to local light leakage, resulting in a certain degree of red deviation around the picture. The solution is to replace the backlight module or adjust the image brightness to reduce the frequency of the backlight module.
Color calibration problem: Color calibration refers to the process of calibrating the image with empty colors on the TV. If the color calibration is incorrect, the color of the TV's image will be skewed, resulting in red around the screen.
The solution is to adjust the alignment color calibration settings or seek professional technical support for assistance.
If your TV is red, it is recommended that you contact a professional technician as soon as possible for inspection and repair.
-
Redness on the side of the TV,It may be that the display screen of the TV is faulty,If the TV is used for a long time,Xiangsou brother's display screen will be aging if it misses,There will be redness on the side。
-
Summary. Dear,Hello,Reasons for the red dot on LCD TV:1、If the position of the red dot changes infinitely,It may be a problem with the signal source or the program source itself,In this case,You only need to detect the connection line,Or you need to reconnect another connection cable,Or you can change other program channels to**,So as to solve the problem that the program source displays the red dot。
2. If the position of the red dot is fixed, it is usually caused by the quality problem of the LCD screen (belonging to the bad dot), under normal circumstances, if the number of red dots is not large, it does not affect the normal use, and it can be continued to be used without notice; If the number of red dots is large and affects the normal viewing of TV programs, you need to contact the after-sales service department of the TV to test and repair the TV, or replace the screen.
Dear,Hello,Reasons for the red dot on LCD TV:1、If the position of the red dot changes infinitely,It may be a problem with the signal source or the program source itself,In this case,You only need to detect the connection line,Or you need to reconnect another connection cable,Or you can change other program channels to**,So as to solve the problem that the program source displays the red dot。 2. If the position of the red dot is fixed, it is usually caused by the quality problem of the liquid lead shielded crystal screen (belonging to the bad spot), under normal circumstances, if the number of red dots is not large, it does not affect the normal use, and it can continue to be used without further notice; If the number of red dots is large, which affects the normal viewing of the TV festival and eyes, you need to contact the TV after-sales service department to test and repair the TV, or replace the screen.
Dear, the appearance of red dots is not normal. Reasons for the red dot on LCD TV:1、If the position of the red dot changes infinitely,It may be a problem with the signal source or the program source itself,In this case,You only need to detect the connecting line,Or you need to reconnect another connecting cable,Or you can change other program channels to**,So as to solve the problem that the program source displays the red dot。
2. If the position of the red dot is fixed, it is usually caused by the quality problem of the LCD screen (which is a bad pixel), under normal circumstances, if the number of red dots is not large, it does not affect the normal use, and you can continue to use it without prior notice; If the number of red dots is large and affects the normal viewing of TV programs, you need to contact the after-sales service department of the TV to test and repair the TV, or replace the screen. Extended information:PrecautionsDo not put the LCD TV in a humid place,If the moisture has entered the LCD TV,You must put it in a dry place,So that the moisture inside will evaporate,The LCD screen is coated with a special coating,The screen has a better display effect,Commonly used hairspray、Alcohol、Mosquito repellent and other sprays on the screen in summer,The special coating will dissolve,Damage to the LCD molecules and even the entire screen,Resulting in the shortening of the life of the entire TV。
Do not spray the detergent directly on the surface of the screen, it is easy to flow into the screen, causing a short circuit fault inside the LCD screen, causing unnecessary losses, and it is also wrong to clean the screen regularly and quantitatively, and frequent scrubbing will also cause some adverse effects on the TV screen.
If the red light is on, it means that your TV has been powered on and is in standby mode, you can try pressing the on/off key of the TV remote control or the switch button on the TV; You can also try to press the channel on the remote control [+ -] or [TV], [**] and other switch keys to check whether the TV has a signal. Here's a closer look: >>>More
This is normal, it is the process of obtaining the IP address, without manually resetting the IP address, you can try to kill the virus, because it may also be due to the virus that causes the system to start slowly, it is best to delete some icons that are not commonly used on the desktop, too many icons are not good. >>>More
Maybe the sound card driver is broken.
Try reinstalling the driver. >>>More
It is the identification of smart objects, such a layer, the function is limited, if you want to do it, you need to right-click the mouse, select "rasterize layer" and then release the limit. >>>More
Uusee's Question:
1.If you have uusee installed, then you are in the task manager process, turn off the process of uusee, and then it is best to ban it in the startup item, start-run-enter msconfig OK-start to remove uusee, OK. >>>More