What is the reason why the Supor vacuum cleaner XCL15804c 13 cannot be started?

The Supor vacuum cleaner cannot be started because the current operating status of the vacuum cleaner is faulty, or it may be a problem with the operation of the vacuum cleaner.

If it doesn't start, it's probably because of poor wire contact or a power outage, so you should first check if its hardware is damaged.

Say that you have bought a vacuum cleaner from Supor and can't start it by yourself, first check the power supply to see if the power is turned on normally, and then check whether your own starting sequence is.

The reason why the Supor vacuum cleaner XCL1580440 13 cannot be started is because the charging effect inside is not very good.

If the vacuum cleaner does not start, it may be blocked by dirt, so it can be cleaned and it can be used again.

Hello, this Supor's vacuum cleaner can't be started, can you see if the power switch is plugged in? I really can't do it, so I can only take it and repair it.

If the vacuum cleaner can't start, you should smell it first to see if there is a smell of burnt motor.

Supor's panting words can't be started because of a malfunction.

The reason why the Supor vacuum cleaner x7role8047-1 can't start is very simple, it is that the power supply is not working.

If you encounter any specific difficulties, explain the problem clearly and help you find a way.

Summary. 1. The fan blades are not fixed tightly.

The fan blades of the vacuum cleaner are not tightened, which may cause the vacuum cleaner not to suction. If the fan blade of the vacuum cleaner slides on the motor shaft, the positioning screw of the fan blade should be tightened in time.

2. The top cover and the middle shell are not tightly sealed.

There is also a possibility that the vacuum cleaner does not suction, that is, the top cover of the vacuum cleaner is not tightly sealed with the middle shell, and it should be carefully checked whether there are cracks or whether the screws are tightened.

3. The dust collection pipe is blocked.

When the vacuum cleaner is working, it will transport all kinds of garbage and dust into the dust bag, so there is a high chance that the vacuum cleaner straw will become clogged. Therefore, if the vacuum cleaner does not suction, remember to check whether the vacuum pipe is blocked, if there is, you need to clean up the blockage in time, and then shake off the dust.

4. The generator is not tightly sealed.

Check the gasket and screwdriver next to the generator to see if there is any loosening phenomenon and tighten it in time; If the screws are missing, replace them in time.

5. Dust collector capacity.

If you use the vacuum cleaner for a long time and do not clean up the garbage on the dust collector in time, you will not suck it after reaching the upper limit, as long as you pour out the dust and then install it for use.

The Supor C10Pro vacuum cleaner does not suction.

1. The fan blades are not fixed and the fan blades of the vacuum cleaner are not tightened, which may cause the vacuum cleaner not to suction. If the fan blade of the vacuum cleaner slides on the motor shaft, the positioning screw of the fan blade should be tightened in time. 2. If the top cover and the middle shell are not tightly sealed, there is another possibility that the vacuum cleaner does not suction, that is, the top cover and the middle shell of the vacuum cleaner are not tightly sealed, and it should be carefully checked whether there are blind cracks or whether the screws are tightened.

3. When the vacuum cleaner is working, it will transport all kinds of garbage and dust to the dust bag, so it is also very likely that the vacuum cleaner straw will be blocked. Therefore, if the vacuum cleaner does not suction, remember to check whether the vacuum pipe is blocked, if so, you need to clean up the blockage in time and then shake off the dust. 4. If the generator is not tightly sealed, check the gasket and screwdriver next to the generator to see if there is any loosening phenomenon, and tighten it in time; If the screws are missing, replace them in time.

5. The capacity of the dust collector is used for a long time without cleaning up the garbage on the dust collector in time, and it will not be suction after reaching the upper limit, as long as the dust is poured out and then installed and used.

The light is on means that the power supply is normal, and you can see if the dust box is full. Or the dust box is not installed properly. If it's all right, check to see if there's any blockage.

Feel the bridge and the machine to see if the temperature is high, if it is high, there may be a problem. If you check them all. If it still does not move, it may be caused by internal circuit problems, or foreign objects entering the inside of the motor, etc., and it is recommended to send it to the after-sales service to deal with the resistance state.

What to do if the Supor C11 vacuum cleaner is not powered 1, the vacuum cleaner charger is broken and cannot be charged, or the power cord of the troublemaker is out of power, the solution is to change the plug with electricity to try, or change the charger to try the bending banquet, the general charger light is normal. 2. If the battery is broken, if the vacuum cleaner battery is broken, it can't be charged, how is it broken, due to the lithium battery, it will generally age after 2-5 years, depending on the use environment and method, there will be no capacity after aging, so it can't be flushed into the electricity. Of course, the red light showing the battery level will always be on, in which case the vacuum cleaner should be repaired in time.

What to do if the Supor C11 vacuum cleaner is not energized: 1. The vacuum cleaner charger is broken and cannot be charged, or the power cord is out of power, the solution is to change the plug with electricity, or try to change the charger, and the charger lights are generally normal. 2. If the battery is broken, if the vacuum cleaner battery is broken, it will not be charged, how can it be late, due to the lithium battery, it will generally age after 2-5 years, depending on the environment and way of using the bend banquet, there will be no capacity after aging, so it cannot be flushed into the electricity.

Of course, the red light showing the power will always be on, in this case, it is necessary to repair the vacuum cleaner in time.

Hello <>

There are generally many reasons why the Supor C11 vacuum cleaner does not power on. First of all, you can check that the electrical socket is powered on and that the plug is loose or damaged. Secondly, you can check whether the wiring of the vacuum cleaner itself is damaged or if the wiring is short-circuited.

Finally, you can check if the motor is broken. If there are no problems with the above inspections, it is recommended that you find a professional maintenance personnel to help with the repair. In general, this problem is not necessarily the problem of the vacuum cleaner itself, and it is necessary to understand the specific situation in order to make the right judgment and solution.

Extended addition: How to repair Supor C11 vacuum cleaner 1If the power socket or plug is damaged, the corresponding part can be replaced or the power socket can be replaced.

2.If you find that the vacuum cleaner wire is short-circuited or broken, and you need to replace or repair the wire, you can do it yourself or ask the electrical maintenance personnel to help. 3.

If the motor is broken, it is generally necessary to replace the motor or repair it, and you need to ask professional maintenance personnel to help. 4.When using the Supor C11 vacuum cleaner, pay attention to keep it clean and avoid inhaling large particles or debris such as long hair, which may cause damage to the motor.

Therefore, the specific method of repairing the Supor C11 vacuum cleaner needs to understand the specific situation, if you can't solve the problem yourself, you need to find professional help when you know it. In the process of daily use, more attention is paid to maintenance and cleaning, which can prolong the life of the vacuum cleaner. <>

Can the Supor XCL15B04C-13 vacuum cleaner dust cup and the XCL15B04A-13 vacuum cleaner dust cup be universal.

Hello, Supor XC15B04C-13 and XCL15B04A-13 vacuum cleaner dust cups are not universal. Although they are similar in size, they are not interchangeable because they have different dust cup capacities and sizes. The capacity of the Supor XCl15B04C-13 vacuum cleaner dust cup is liters, which is suitable for the vacuum cleaner of Supor XCl15B04C-13 model; The Supor XCl15B04A-13 vacuum cleaner dust cup has a capacity of liters, which is suitable for use in the Supor XCL15B04A-13 vacuum cleaner.

Therefore, if you need to replace the dust cup, be sure to choose the dust cup that matches your vacuum cleaner model. In addition, it is recommended that you regularly clean the dust difference shed cup and filter when using the vacuum cleaner to ensure the normal use and cleaning effect of the vacuum cleaner. If you have any other questions, please feel free to ask me.

Summary. Hello dear, it is a pleasure to answer this question for you. <>

The question received by the teacher is: Supor vacuum cleaner is installed on the vacuum box and will stop for a while, and the answer to you will not stop when the vacuum box is removed, and the answer given to you by the teacher is: Hello, the Supor vacuum cleaner will stop after installing the vacuum box, and the solution to remove the vacuum box will not stop is:

1. The device cannot be used, it may be that the battery is exhausted, you can try to charge it for a period of time before using it. 2. The equipment cannot be used, it may be that the voltage of the vacuum cleaner is inconsistent with the power supply, you can try to replace the power socket. 3. If the device is not used for a long time, it is recommended to charge it regularly.

4. If the dust collection pipe of the equipment is damaged, it should be replaced in time, if it is not replaced, the fan may be damaged. 5. The shell of the equipment can be cleaned, and it can be wiped with a clean soft cloth, not with organic solvents, which may cause the shell to fade. 6. If there is a peculiar smell in the equipment, it may be moldy inside the dust box, which can be removed and cleaned.

Hope it helps you <>

Have a great <>

The Supor vacuum cleaner will stop when the vacuum box is turned on, and it will not stop when the vacuum box is removed.

Hello dear, it's a pleasure to answer this question for you. <>

The question received by the teacher is: Supor vacuum cleaner is installed on the vacuum box and will stop for a while, and the answer to you will not stop when the vacuum box is removed, and the answer given to you by the teacher is: Hello, the Supor vacuum cleaner will stop after installing the vacuum box, and the solution to remove the vacuum box will not stop is:

1. The device cannot be used, it may be that the battery is exhausted, you can try to charge it for a period of time before using it. 2. The equipment cannot be used, it may be that the voltage of the vacuum cleaner is inconsistent with the power supply, you can try to replace the power socket. 3. If it is not used for a long time, it is recommended to charge it regularly.

4. If the dust collection pipe of the equipment is damaged, it should be replaced in time, if it is not replaced, the fan may be damaged. 5. The shell of the equipment can be cleaned, and it can be wiped with a clean soft cloth, not with organic solvents, which may cause the shell to fade. 6. If there is a peculiar smell in the equipment, it may be moldy inside the dust box, which can be removed and cleaned.

I hope I can help you <>

Have a great <>

Hello dear, the following is an extended information about your question, Supor is a holding subsidiary of the French SEB Group, is China's largest and the world's second largest cookware R & D and manufacturing Zhisong Wu Shang Yingzhi, China's leading brand of small kitchen appliances, is the first listed company in China's cookware industry (****002032). It can provide you with a reference <>

I hope it can help you, and I wish you a happy life. [Flowers or] <>

You. The vacuum cleaner will not stop when the vacuum box is installed, as long as the filter element is installed for a while.

The vacuum cleaner does not use a filter element, and the filter element will accumulate a large amount of dust in the vacuum cleaner, which will affect the use of the vacuum cleaner. <>

Install the filter element and stop the machine after a while.

Do you have a filter that can accumulate a lot of dust<>

No, it won't. If there is no dust, it will stop for a while.

Which version of the Supor vacuum cleaner is on your side<>