How to make the continuous spray faster, how to spray continuously

Updated on technology 2024-04-21
6 answers
  1. Anonymous users2024-02-08

    Double spray: 1Press Shift to enter the normal drift state.

    2.Release and then [do not move], and straighten the front of the car (the first part cannot let go of the accelerator).

    3.Let go of the throttle and only press the two shift keys to perform the second drift (note: this step is more important than the key to the Kai key!). If you press the throttle, you can.

    This can lead to a premature fire-breathing.

    4.I straighten the front of the car and breathe fire!

    Note: This is not the same as the second between the previous step and the second to lose about that].

    5.Let go, then quickly press for a second firethrow! [release and press the second]! Double spray.

    Spray. Introduction: Lian Piao is to bring the drift skills to the highest level. With the use of the continuous drift, it is possible to drift through the forest hairpin at a few small angles.

    Large-angle corners, and can quickly accumulate N2O, so that you can really experience the joy of drifting! But there is a caveat!

    Method:1It's still the same as before, press shift first to enter the normal first drift state.

    2.Get on the right track! (Medium Don't let go!) )

    3.Press Shift to perform the first fire-breathing and start the second drift!

    4.Liangbi has a good direction! (Don't let go either!)

    5.Shift for a second fire-breathing and a third drift!

    The third Spitfire.

    The fourth drift ......[You're still breathing fire in the middle of the ticket].

    In this way, a continuous spray is formed! It should be noted that the interval between steps 3 and 5 and shift is about a cabinet second. It's no different from pressing together!

    Repeat 4 and 5 when you're done....Keep repeating! It's just a fake spray!

    Many friends reflect that "when you are floating, you can't spray it like a master for a short distance", but it is actually very simple, but it is a spray first. Then a short drift and a fire-breathing! ~~

    Some people said, "Yes, yes, but it won't hit the wall, and it won't hit it in a row." This is very simple, and students who will pay special attention to this.

    Let's talk about the small medium u first; Because the little U can't be sprayed continuously.

    The angle of one vote is 'about' about 26 degrees.

    Spray once and then spray continuously.

    The forward time is about a second less than that in the reverse.

    Forward is not a matter of whether you have a reverse angle or a positive angle] for example.

    It's the opposite angle'<

    So. is a positive angle.

    Let's talk about U, the angle of one vote is about 22 degrees. Remember, the base degree reversal should refer to "Seconds" by multi-point. No short spray is required, direct spraying.

    Big U, 1 vote about 18 degrees, and then sprayed].

  2. Anonymous users2024-02-07

    One. Optimize drift.

    2.+shift (shift tap, the shorter the better)3After clicking shift, immediately return to the direction, the speed should be fast) 4.(Spitfire).

    The 1-3 step connection must be fast).

    Two. Double spray. 1.+shift (Optimized Drift) [First Drift] 2back direction).

    3.+shift (two-button tap, the shorter the better) [Second Drift]4+ Immediately return to the direction and breathe fire for the first time).

    5.(Second Spitfire).

    The two drifting wheel prints should not be connected, and the interval between the two drifting wheel prints should not be too large) three. Spray. 1.+shift (the best grip of the cultivation of the best drift) 2back direction).

    3.+shift (two-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).

    5.→+shift

    Repeat 3 or 4 steps.

    Finally, the continuous spray is the continuation of the extension of the double spray, and the repeated double spray) four. Double spray.

    1.+shift (Optimized Drift) [First Drift] 2back direction).

    3.+shift (three-button tap, the shorter the better) [second drift]4+ Immediately return to the direction and breathe fire for the first time).

    5.(Second Spitfire).

    The biggest difference between LINK double spray and normal double spray is in step 3, the bending speed of LINK double spray is faster than that of ordinary double spray).

    Note: 1-3 steps"↑"It's always pressed.

    Five. link spray.

    1.+shift (optimized drift).

    2.back direction).

    3.+shift (three-key tap, the shorter the better)4+ Immediately return to the direction and breathe fire).

    5.↑+shift

    Repeat 3 or 4 steps.

    Finally, Link spray is actually a continuation of Link double spray, to practice Link spray well, you must be very proficient in optimizing drift, double spray, even spray, link double spray).

  3. Anonymous users2024-02-06

    If you can drift and then breathe fire, then friends you are not far from learning to float!

    The first to enter the personal time race to choose the town road, which is the one with a circle (don't tell me you don't have money to enter).

    Second, perform a single float for a while.

    Find the feel, and here begins.

    I use the keyboard to operate.

    Keypad's. 8 on 4 left.

    6 right. It is recommended to use this and it is not easy to press and misoperate.

    Third, the best thing to achieve is to float after the single float.

    The two car prints do not intersect.

    Fourth, try double spraying.

    1.↑→shift

    The first drift.

    It can be a little longer by time.

    It can't be without the traces of drift.

    3.→shift

    Second drift) 4

    Let go of the left, and let go of the front and the bottom.

    5.Press again before.

    Fifth, enter the continuous spray.

    1.↑→shift

    The first drift.

    Just press it and it won't take long.

    3.→shift

    Second drift) 4

    Repeat 1--4.

    2 and 3 alternately.

    2. It can be a little longer (for beginners, of course).

    Controlling the rhythm is basically one left.

    A shift

    If you feel like you don't drift at the end.

    You can press it again before you put it down again, and it may breathe fire.

    That's how you get used to it.

    The focus is on shifting the rhythm of the hits.

    If you are ripe, you have to be fast.

  4. Anonymous users2024-02-05

    Turning to choose the best path to drift, and then using continuous spraying can keep the speed of drifting in the spray state, which greatly shortens the cornering time, and because of the use of continuous spraying, the nitrogen growth rate is super fast, and it can basically be kept in the spray state to complete the race

  5. Anonymous users2024-02-04

    Hehe... It's a matter of technology, it's good to practice more. . .

    Here's your icon... You have to put in the practice.

    Learn slowly and become proficient.

  6. Anonymous users2024-02-03

    Not only do you have to practice more, but you also have to use your brains to do it, and that's a very hard thing

Related questions
1 answers2024-04-21

1) Single Drift 1 shift+ Drift to the right) 2 Turn the head) 3 (Spitfire) (2) Simple Drift 1 shift+ Drift to the right) 2 Turn the head) 3 (First Spitfire + Drift) (Loop) is a single drift (3) Double (Spray) Drift 1 shift+ press at the same time) 2 The advance of the first and second parts is the same forward, that is, ordinary drift but not Spitfire) 3 shift+ This step must be fast, you must not press forward when drifting) 4 Spray) 5 (Spray) Double Spray. >>>More

3 answers2024-04-21

1. Right break.

Turn the head) 1, +shift >>>More

17 answers2024-04-21

Add some vinegar: Put some vinegar in the ratio of 500 grams of rice to 1 ml of vinegar, which can make the rice soft and easy to store and prevent rancidity, and the cooked rice will definitely not have a sour taste, but a stronger fragrance. >>>More

13 answers2024-04-21

1.Press shift to enter the normal drift state.

2.Straighten the front of the car (the first part can not let go of the accelerator). >>>More

8 answers2024-04-21

First press and hold the Bluetooth headset power button for about ten seconds, see the signal light flashing, turn on the Bluetooth of the mobile phone, search for nearby Bluetooth devices, and finally find the Bluetooth name of the Bluetooth headset, click to connect, and you can use it after the connection is successful.